i9100 boor repair done.but still dead
 

Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.66.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9100 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 1414110FBFBA99FD ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC210
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
Halting CPU...
Init target ...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00010015 Name : VYL00M Size : 14.7 G , (30777344) Blocks
EMMC #1 : ID : 0x00010000 Name : VYL00M Size : 512.0 K , (1024) Blocks
eMMC flash device(s) found, Device ID : 0x00150001
NAND Writing GPT...
eMMC Write OK! Elapsed time: 41.406250s (98.922 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time: 23.875000s (53.613 KiB/s)
NAND Writing SBL2...
eMMC Write OK! Elapsed time: 23.890625s (53.578 KiB/s)
NAND Writing PARAM...
eMMC Write OK! Elapsed time: 90.328125s (90.692 KiB/s)
NAND Writing ROM2...
eMMC Write OK! Elapsed time: 67.593750s (7.575 KiB/s)
All Done.


any solution.............

same situation here... i will do my own jig cable, try it, lets see what happen... :(

try flash 512mbt DUMP.
but looks like bad emmc.

what do you mean with bad emmc?

dump file is not available to download, so, what can we do?

Hello , bro. Please dump at least 256mb from phone and upload that on mediafire etc. I will look asap what can be wrong with phone.