GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   i9300 emmc name 00000 (https://forum.gsmhosting.com/vbb/f672/i9300-emmc-name-00000-a-1774643/)

reynant 02-05-2014 10:01

i9300 emmc name 00000
 
ask if this emmc status can be repaired via emmc tool at this moment..i write rom 1 and rom 2 phone still dead..

Successfully connected to box on COM2
Box S/N: 0D00800A35C0C387, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1660 mV
CMD Active Level:2289 mV
EMMC CID 1501003030303030305620110726589D
EMMC CSD 902701320F5903FFF6DBFFEF8A404023
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 FW rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20140103_1607.extcsd
Searching for partition tables...
Done.
Writing file...C:\Users\tj\Desktop\Easy Jtag Repair Files\I9300\EMMC_ROM1_00000000_20000000.bin

Successfully connected to box on COM2
Box S/N: 0D00800A35C0C387, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1660 mV
CMD Active Level:2289 mV
EMMC CID 1501003030303030305620110726589D
EMMC CSD 902701320F5903FFF6DBFFEF8A404023
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 FW rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 241 kB/s
Done !!!
Writing file...C:\Users\tj\Desktop\Easy Jtag Repair Files\I9300\EMMC_ROM2_00000000_00200000.bin

Successfully connected to box on COM2
Box S/N: 0D00800A35C0C387, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1650 mV
CMD Active Level:2289 mV
EMMC CID 1501003030303030305620110726589D
EMMC CSD 902701320F5903FFF6DBFFEF8A404023
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 FW rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 240 kB/s
Done !!!

Successfully connected to box on COM2
Box S/N: 0D00800A35C0C387, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1650 mV
CMD Active Level:2279 mV
EMMC CID 1501003030303030305620110726589D
EMMC CSD 902701320F5903FFF6DBFFEF8A404023
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 FW rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20140103_1646.extcsd
Searching for partition tables...
Done.

djuvegija 02-09-2014 17:09

Any software solution for emmc name 00000 or must hardware change EMMC?

NoName® 02-09-2014 17:44

Quote:

Originally Posted by djuvegija (Post 10083013)
Any software solution for emmc name 00000 or must hardware change EMMC?

EMMC NAME "00000" can't be solved by software at this moment. We working on solution now.


Отправлено из моего iPad используя Tapatalk HD

skyulock 02-09-2014 20:28

Quote:

Originally Posted by NoName® (Post 10083068)
EMMC NAME "00000" can't be solved by software at this moment. We working on solution now.


Отправлено из моего iPad используя Tapatalk HD

you dont have good solution on EMMC is good for the team to o copy an pastes

amit kanpur 02-09-2014 20:51

Quote:

Originally Posted by djuvegija (Post 10083013)
Any software solution for emmc name 00000 or must hardware change EMMC?

working on team this solution ,wait to perfect solution


All times are GMT +1. The time now is 22:42.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.12835 seconds with 6 queries

SEO by vBSEO