I9300 No Product NAME fixed but still dead - GSM-Forum

psytr0nic · 07-03-2014, 13:39

Hello this is my logs , I got the phone in dead Condition !
in my first log , it was NO NAME so I fixed formated wrote ROM1/2 .
after all of thes operation the set is still dead ! EMMC's damaged or softawre issue ?

Before Repaired

Quote:

Z3X EasyJtag Software ver. 1.5.6.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:917 mV
CMD Active Level:1134 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C

EMMC CSD : 902701320F5903FFF6DBFFEF8A404022

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20140604_1156.extcsd
Done.

Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:917 mV
CMD Active Level:1134 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Invalid

After Jobs

Quote:

Z3X EasyJtag Software ver. 1.5.6.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1F82A2BE85FE8
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 4163513320
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4163513320_20140604_1235.extcsd
Searching for partition tables...
Detected GPT over MBR...
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (BOTA0) Range: [0X400000,0X7FFE00] ,Len: 400000
MMCBLK0P1 (BOTA1) Range: [0X800000,0XBFFE00] ,Len: 400000
MMCBLK0P2 (EFS) Range: [0XC00000,0X1FFFE00] ,Len: 1400000
MMCBLK0P3 (PARAM) Range: [0X2000000,0X27FFE00] ,Len: 800000
MMCBLK0P4 (BOOT) Range: [0X2800000,0X2FFFE00] ,Len: 800000
MMCBLK0P5 (RECOVERY) Range: [0X3000000,0X37FFE00] ,Len: 800000
MMCBLK0P6 (RADIO) Range: [0X3800000,0X57FFE00] ,Len: 2000000
MMCBLK0P7 (CACHE) Range: [0X5800000,0X457FFE00] ,Len: 40000000
MMCBLK0P8 (SYSTEM) Range: [0X45800000,0XA57FFE00] ,Len: 60000000
MMCBLK0P9 (HIDDEN) Range: [0XA5800000,0XC87FFE00] ,Len: 23000000
MMCBLK0P10 (OTA) Range: [0XC8800000,0XC8FFFE00] ,Len: 800000
MMCBLK0P11 (USERDATA) Range: [0XC9000000,0X3AAFFFE00] ,Len: 2E2000000
Done...Presets has been updated...
Done.

Running:SAMSUNG: Read S.M.A.R.T Report...

Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal
Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 2,1,2,3
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 49,50,49,48
All Erase counts (min,avg,max): 0,0,7
SLC Erase counts (min,avg,max): 0,0,7
MLC Erase counts (min,avg,max): 0,0,1
S.M.A.R.T Report Done !!!

mscomp · 07-03-2014, 18:34

after do repair u must do config boot and write rom 2
without boot config no dm

garrr · 07-06-2014, 23:14

rom 2 and 3 should be 2mb..you have 512kb
try repair vutoom...

psytr0nic · 07-08-2014, 13:03

Quote:

Originally Posted by garrr

rom 2 and 3 should be 2mb..you have 512kb
try repair vutoom...

I repaired VUTOOM br , wat else I have to do again ?

Quote:

Originally Posted by mscomp

after do repair u must do config boot and write rom 2
without boot config no dm

Could you shw me how to Config Boot ?

mscomp · 07-08-2014, 13:58

with one clic n7100 i9300 boot config

psytr0nic · 07-10-2014, 15:48

My last log with smile on my face !! gone to Dw mode now .

Quote:

Z3X EasyJtag Software ver. 1.5.6.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1F82A2BE85FE8
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 4163513320
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_4163513320_20140604_1447.extcsd
Done.

Quote:

Running:SAMSUNG: Read S.M.A.R.T Report...

Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1567 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal
Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 2,1,2,3
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 49,50,49,48
All Erase counts (min,avg,max): 0,1,7
SLC Erase counts (min,avg,max): 0,0,7
MLC Erase counts (min,avg,max): 1,1,3
S.M.A.R.T Report Done !!!

garrr · 07-10-2014, 16:32

your logs seems to be ok....
reheat the power ic...still persist change that ic...

**chand_gee** · 07-10-2014, 16:49

just for information
s3 stuck on logo
when enter downlad mode dont show product name
when try to flashh with odin always fail error
cant go to recovery mode
--------
this phone can solve without replacing emmc

psytr0nic · 07-10-2014, 16:59

log in recovery mode .

Quote:

E:failed to mount /data ( Invalid argument)
can't mount '/data'(Invalid argument)

psytr0nic · 07-10-2014, 18:33

now phone is fixed , repaired efs all done .. thx u nigga

francoo · 07-10-2014, 18:40

Quote:

Originally Posted by psytr0nic

Hello this is my logs , I got the phone in dead Condition !
in my first log , it was NO NAME so I fixed formated wrote ROM1/2 .
after all of thes operation the set is still dead ! EMMC's damaged or softawre issue ?

Before Repaired

After Jobs

Brother solution full

http://forum.gsmhosting.com/vbb/f672...i9300-1816930/

psytr0nic · 07-11-2014, 01:49

I will repeat one more time !! my phone has been fixed !!!

psytr0nic · 07-12-2014, 16:50

another fixed !! thank team !! I <3 .

Quote:

Z3X EasyJtag Software ver. 1.5.8.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 08FFF00938DBAFFC, ,FW Ver.: 01.50
CMD Pullup Level:907 mV
CMD Active Level:1124 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C

EMMC CSD : 902701320F5903FFF6DBFFEF8A404022

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20140606_1257.extcsd
Done.

Quote:

Z3X EasyJtag Software ver. 1.5.8.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 08FFF00938DBAFFC, ,FW Ver.: 01.50
CMD Pullup Level:928 mV
CMD Active Level:1124 mV
eMMC Device Information
EMMC CID : 15010056545530304DF16A9501186FA0

EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 1788150040
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1788150040_20140606_1259.extcsd
Done.
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:1124 mV
Repair VTU00M eMMC:
Entering repair mode 2...
Warning Can't enter repair mode 2, Reason: CARD Ready Timeout Error
Please, Reconnect eMMC power lines and press 'VTU00M Repair' again
===================================
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:1124 mV
Repair VTU00M eMMC:
Entering repair mode 2...
Warning Can't enter repair mode 2, Reason: CARD Ready Timeout Error
Please, Reconnect eMMC power lines and press 'VTU00M Repair' again
===================================
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:1124 mV
Repair VTU00M eMMC:
Entering repair mode 2...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 2...
Success
EMMC repair Done , Reconect eMMC and check S.M.A.R.T Report.
Please don't forget to repair extCSD from backup!!!
Please don't forget to configure BOOT sizes!!!
Running:Repair extCSD...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:1124 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!
Running:SAMSUNG: MoviNAND Reset + Format...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:1124 mV
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:1124 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
 
Z3X EasyJtag Software ver. 1.5.8.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1185 mV
CMD Active Level:1577 mV
eMMC Device Information
EMMC CID : 15010056545530304DF16A9501186FA0

EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 1788150040
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: VTU00M_1788150040_20140606_1302.extcsd
Done.
Running:SAMSUNG: Read S.M.A.R.T Report...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1577 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal

Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 1,3,2,1
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 50,48,49,50
All Erase counts (min,avg,max): 0,0,1
SLC Erase counts (min,avg,max): 0,0,1
MLC Erase counts (min,avg,max): 0,0,0
S.M.A.R.T Report Done !!!
Running:Change BOOT CONFIG...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1577 mV
Writing eMMC Register...
Written: REG : 179 VAL :48
Done.
Running:Change BOOT WIDTH...
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1577 mV
Writing eMMC Register...
Written: REG : 177 VAL :1
Done.
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1577 mV
Input file : C:\Users\psy\Desktop\s3\EMMC_ROM2_00000000_0020000 0.bin
Writing 000000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Write Speed: 840 kB/s
Done !!!
 
Z3X EasyJtag Software ver. 1.5.8.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1185 mV
CMD Active Level:1577 mV
Input file : C:\Users\psy\Desktop\s3\EMMC_ROM1_00000000_2000000 0.bin
Writing 000020000000 bytes to 00000000 ...ROM1 (USER ROM)
Write Speed: 2612 kB/s
Done !!!
 
Z3X EasyJtag Software ver. 1.5.8.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxxxxx, ,FW Ver.: 01.50
CMD Pullup Level:1196 mV
CMD Active Level:1567 mV
eMMC Device Information
EMMC CID : 15010056545530304DF16A9501186FA0

EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 1788150040
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1788150040_20140606_1307.extcsd
Done.

psytr0nic · 07-12-2014, 21:29

another NOteII fixed link and log

07-03-2014, 18:34	#2 (permalink)
mscomp No Life Poster Join Date: Apr 2006 Location: Oued zenati Algeria Age: 44 Posts: 1,215 Member: 266158 Status: Offline Sonork: 131654654654 Thanks Meter: 198	after do repair u must do config boot and write rom 2 without boot config no dm

07-06-2014, 23:14	#3 (permalink)
garrr Insane Poster Join Date: Feb 2004 Location: KSA, Al-jouf Posts: 69 Member: 53180 Status: Offline Thanks Meter: 11	rom 2 and 3 should be 2mb..you have 512kb try repair vutoom...

07-08-2014, 13:58	#5 (permalink)
mscomp No Life Poster Join Date: Apr 2006 Location: Oued zenati Algeria Age: 44 Posts: 1,215 Member: 266158 Status: Offline Sonork: 131654654654 Thanks Meter: 198	with one clic n7100 i9300 boot config

07-10-2014, 16:32	#7 (permalink)
garrr Insane Poster Join Date: Feb 2004 Location: KSA, Al-jouf Posts: 69 Member: 53180 Status: Offline Thanks Meter: 11	your logs seems to be ok.... reheat the power ic...still persist change that ic...

07-10-2014, 16:49	#8 (permalink)
chand_gee Moderator Join Date: Jan 2008 Location: <jeddah al saudia> Age: 36 Posts: 2,261 Member: 668050 Status: Offline Sonork: 100.1656307 Thanks Meter: 991	just for information s3 stuck on logo when enter downlad mode dont show product name when try to flashh with odin always fail error cant go to recovery mode -------- this phone can solve without replacing emmc

07-10-2014, 18:33	#10 (permalink)
psytr0nic No Life Poster Join Date: Oct 2010 Location: Abidjan Age: 38 Posts: 2,478 Member: 1418143 Status: Offline Thanks Meter: 353	now phone is fixed , repaired efs all done .. thx u nigga

07-11-2014, 01:49	#12 (permalink)
psytr0nic No Life Poster Join Date: Oct 2010 Location: Abidjan Age: 38 Posts: 2,478 Member: 1418143 Status: Offline Thanks Meter: 353	I will repeat one more time !! my phone has been fixed !!!

07-12-2014, 21:29	#14 (permalink)
psytr0nic No Life Poster Join Date: Oct 2010 Location: Abidjan Age: 38 Posts: 2,478 Member: 1418143 Status: Offline Thanks Meter: 353	another NOteII fixed link and log