IMPORTANT: ALL CABLEs by GPG (Z3X-BOX PRO) need small modify - GSM-Forum

**blang** · 07-24-2013, 12:31

Please solder together 3 pins

dvdaio · 07-24-2013, 15:17

thanks for good info dear because i use this cabel dear

**blang** · 07-24-2013, 18:21

Quote:

Originally Posted by dvdaio

thanks for good info dear because i use this cabel dear

other JTAG use many pins ground.
easy-JTAG use only pin N20. So some problem exist.

I sure after fix jtag will work much better and pin finder will work much better also.

BesTCooL · 08-27-2013, 20:38

in box 16. pin ı see not empty 16. pin for find pinout?
in box can ı make this modifie 16-18-20 can ı make jumper ? Because ı see in box 16. pin go to xilinx chip

Gjakova · 09-23-2013, 16:22

bought new box-pro(gpg) but cable is not similar like in pic

**blang** · 09-23-2013, 19:07

Quote:

Originally Posted by Gjakova

bought new box-pro(gpg) but cable is not similar like in pic

show photo, i will tell what to do. i hope they have fixed this from factory.

Gjakova · 09-23-2013, 19:08

Quote:

Originally Posted by blang

show photo, i will tell what to do. i hope they have fixed this from factory.

can be fixed 4 me working ok

Jabbacks · 09-23-2013, 20:45

Hi,

I just ordered Easy JTAG with 35-in-1 Samsung adapter set from GSMServer. Is the adapter set compatible with this box?

Thanks!

**blang** · 09-23-2013, 20:56

Quote:

Originally Posted by Jabbacks

Hi,

I just ordered Easy JTAG with 35-in-1 Samsung adapter set from GSMServer. Is the adapter set compatible with this box?

Thanks!

give me link i will tell you.

easy-jtag have 20pin standart jtag connector.

Jabbacks · 09-23-2013, 21:00

Wow, you're showing here different adapter than those I ordered.

35 in 1 Samsung JTAG Adapter Set . Unlock software, repair and flash tools, service manuals, unlock codes, spare parts and cables for cell phones - JTAG Samsung Adapters - Cables for flash / unlock devices - Cables and Adapters - Flash and Unlock

**blang** · 09-23-2013, 21:07

Quote:

Originally Posted by Jabbacks

Wow, you're showing here different adapter than those I ordered.

35 in 1 Samsung JTAG Adapter Set . Unlock software, repair and flash tools, service manuals, unlock codes, spare parts and cables for cell phones - JTAG Samsung Adapters - Cables for flash / unlock devices - Cables and Adapters - Flash and Unlock

yes. this will work. but i think you need also JPINS for nevest phones.
check JPINS by MOORC.

Jabbacks · 09-23-2013, 21:11

Wow, thanks bro... Order already on it's way... Just saw your cable pinout and was shocked spending over $100USD for the adapters.... hehehehe...

Thanks again!

Jabbacks · 09-23-2013, 21:54

I have here dead boot GT-i9100 for a start. Is it possible to repair boot with this set of cables?

Phone was flashed with wrong PIT file with ODIN. It was working alright and owner tried to put custom firmware into it.

Thanks!

saif@cellplus · 10-02-2013, 08:08

hi
can I use riff jtag box cable to z3x pro instead?

Regards,
saif.

Gjakova · 10-02-2013, 09:54

Quote:

Originally Posted by saif@cellplus

hi
can I use riff jtag box cable to z3x pro instead?

Regards,
saif.

yep working almost with all jtag cables

07-24-2013, 12:31	#1 (permalink)
blang Product Manager Join Date: Oct 2000 Location: future Posts: 22,431 Member: 2368 Status: Offline Sonork: 100.111111 Thanks Meter: 186,557	IMPORTANT: ALL CABLEs by GPG (Z3X-BOX PRO) need small modify Please solder together 3 pins

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-24-2013, 15:17	#2 (permalink)
dvdaio No Life Poster Join Date: May 2006 Posts: 629 Member: 276432 Status: Offline Thanks Meter: 65	thanks for good info dear because i use this cabel dear

08-27-2013, 20:38	#4 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	in box 16. pin ı see not empty 16. pin for find pinout? in box can ı make this modifie 16-18-20 can ı make jumper ? Because ı see in box 16. pin go to xilinx chip

09-23-2013, 16:22	#5 (permalink)
Gjakova No Life Poster Join Date: Oct 2005 Location: Republic of Kosova Age: 54 Posts: 681 Member: 189304 Status: Offline Sonork: 100.1614605 Thanks Meter: 40	bought new box-pro(gpg) but cable is not similar like in pic

09-23-2013, 20:45	#8 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	Hi, I just ordered Easy JTAG with 35-in-1 Samsung adapter set from GSMServer. Is the adapter set compatible with this box? Thanks!

09-23-2013, 21:00	#10 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	Wow, you're showing here different adapter than those I ordered. 35 in 1 Samsung JTAG Adapter Set . Unlock software, repair and flash tools, service manuals, unlock codes, spare parts and cables for cell phones - JTAG Samsung Adapters - Cables for flash / unlock devices - Cables and Adapters - Flash and Unlock

09-23-2013, 21:11	#12 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	Wow, thanks bro... Order already on it's way... Just saw your cable pinout and was shocked spending over $100USD for the adapters.... hehehehe... Thanks again!

09-23-2013, 21:54	#13 (permalink)
Jabbacks No Life Poster Join Date: Feb 2010 Location: Majuro, Marshall Islands Posts: 584 Member: 1227040 Status: Offline Sonork: 100:1654728 Thanks Meter: 55	I have here dead boot GT-i9100 for a start. Is it possible to repair boot with this set of cables? Phone was flashed with wrong PIT file with ODIN. It was working alright and owner tried to put custom firmware into it. Thanks!

10-02-2013, 08:08	#14 (permalink)
saif@cellplus No Life Poster Join Date: Apr 2003 Location: INTERNET-INDIA Posts: 683 Member: 26488 Status: Offline Sonork: 100.1581233 Thanks Meter: 151	hi can I use riff jtag box cable to z3x pro instead? Regards, saif.