j100h can't repaire

[melgsm]

Z3X EasyJtag Software ver. 2.3.0.1
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 010080237280F18A, ,FW Ver.: 01.55CMD Pullup Level:2010 mV
CMD Active Level:2505 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------EMMC CID : 90014A48344732621101AB6A619262F4
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 06/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 2875875730
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _2875875730_20161115_2046.extcsd
Done.

extCSD Are not selected , skip writing extCSD
Processing file...E:\boxes\z3x\emmc\samsung\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
ROM2 Are not selected , skip writing ROM2
Z3X EasyJtag Software ver. 2.3.0.1
Skip loading eMMC Addon Firmware
ROM3 Are not selected , skip writing ROM3
CMD Pullup Level:2010 mVCMD Active Level:2505 mV
Input file : E:\boxes\z3x\emmc\samsung\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK\SM-J100h_J100HXCU0AOD4_ROM1_OK.binWriting 0040000000 bytes to 00000000 ...ROM1 (USER ROM)
Write Block Failed, Reason: Write Block Verify Error Done.

[melgsm]

what wrong in my case ?

[foufou34]

YOUR boot config is ROM2(boot1) so for repair boot for this phone you need to write the rom2 file in rom2 partition and not skip this.

[Suny125]

Samsung J100H/DS Boot Repair Pinout / Dead Boot Repair File

File Link 4Shared

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: , ,FW Ver.: 01.55
CMD Pullup Level:2031 mV
CMD Active Level:2371 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------


EMMC CID : 1501004E4A325A4D42009E73B45192AC

EMMC CSD : D02701320F5903FFF6DBFFEF8E40400C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2015 Rev.0x0
EMMC NAME: NJ2ZMB , S/N: 2658382929
EMMC NAME (HEX): 4E4A325A4D4200 
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)

Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

---------------------------------------------

Backup saved: NJ2ZMB_2658382929_20161009_1201.extcsd
Done.

Z3X EasyJtag Software ver. 2.4.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2031 mV
CMD Active Level:2371 mV
Input file : E:\JTAG\Z3X Easy-JTAG\J100H\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Writing 0040000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 941 kB/s

[COLOR="cyan"]

Br
Suny125

[/COLOR