|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus. |
| LinkBack | Thread Tools | Display Modes |
05-16-2017, 09:09 | #1 (permalink) |
No Life Poster Join Date: Dec 2006 Location: GSM WORLD
Posts: 3,295
Member: 412843 Status: Offline Sonork: 100.1604902 Thanks Meter: 497 | J110H Dump Required Plz @All My Seniors @My Fellows To All Me Respected I Need J110H Dump Plz Its Dead After Flash I Tired To Write Factory File (Included Bootloader Files) With PIT With EasyJTAG Plus Code: 5/15/2017 4:10:35 PM> eMMC_tool Suite ver. 1.0.0.45 5/15/2017 4:10:35 PM> Microsoft Windows XP (32 bit) build 2600 (5.1.2600.6532) 5/15/2017 4:10:35 PM> 5/15/2017 4:10:35 PM> Looking for EasyJTAG box... 5/15/2017 4:10:35 PM> EasyJTAG API ver. 2008 5/15/2017 4:10:35 PM> Setting IO Levels to 1.8V 5/15/2017 4:10:35 PM> Setting frequence to 14 Mhz 5/15/2017 4:10:35 PM> HiPower mode is OFF 5/15/2017 4:10:37 PM> OpenUSB returned = 0 5/15/2017 4:10:37 PM> Power Controller returned = 0 5/15/2017 4:10:37 PM> EasyJTAG Box Serial = XXXXXXXXXX 5/15/2017 4:10:42 PM> Card Serial = XXXX-XXXX 5/15/2017 4:10:42 PM> CardAttr = 3B7D95000080318065B0XXXXXXXXXX 5/15/2017 4:10:42 PM> EasyJTAG Box Firmware = 01.58 5/15/2017 4:10:42 PM> 5/15/2017 4:11:00 PM> Looking for EasyJTAG box... 5/15/2017 4:11:00 PM> EasyJTAG API ver. 2008 5/15/2017 4:11:00 PM> Setting IO Levels to 1.8V 5/15/2017 4:11:00 PM> Setting frequence to 14 Mhz 5/15/2017 4:11:00 PM> HiPower mode is OFF 5/15/2017 4:11:01 PM> OpenUSB returned = 0 5/15/2017 4:11:01 PM> Power Controller returned = 0 5/15/2017 4:11:01 PM> EasyJTAG Box Serial = XXXXXXXXXXXX 5/15/2017 4:11:01 PM> EasyJTAG Box Firmware = 01.58 5/15/2017 4:11:01 PM> HiPower mode is OFF 5/15/2017 4:11:01 PM> CMD Pullup Level: 1753 mV 5/15/2017 4:11:01 PM> CMD Active Level: 1773 mV 5/15/2017 4:11:01 PM> eMMC Init returned = 0 5/15/2017 4:11:01 PM> EMMC Device Information : 5/15/2017 4:11:01 PM> EMMC CID: 90014A48344732621101377532439244 5/15/2017 4:11:01 PM> EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA 5/15/2017 4:11:01 PM> EMMC Manufacture Name: SKHYNIX 5/15/2017 4:11:01 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A 5/15/2017 4:11:01 PM> EMMC Manufacture Date: 9/2015 , Rev: 01 5/15/2017 4:11:01 PM> EMMC NAME: H4G2b , S/N: 37753243 , rev. 01 5/15/2017 4:11:03 PM> EMMC NAME (HEX): 483447326211 5/15/2017 4:11:03 PM> EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) 5/15/2017 4:11:03 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 5/15/2017 4:11:03 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) 5/15/2017 4:11:03 PM> EMMC Permanent Write Protection: No 5/15/2017 4:11:03 PM> EMMC Temporary Write Protection: No 5/15/2017 4:11:03 PM> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 5/15/2017 4:11:03 PM> Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1) 5/15/2017 4:11:03 PM> Boot Bus Config: 0x00 , width 1bit 5/15/2017 4:11:03 PM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled 5/15/2017 4:11:03 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 5/15/2017 4:11:03 PM> Device supports partitioning features 5/15/2017 4:11:03 PM> Device can have enhanced technological features in partitions and user data area 5/15/2017 4:11:03 PM> Device can have extended partitions attribute 5/15/2017 4:11:03 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 5/15/2017 4:11:03 PM> Backup saved: H4G2b_37753243_20170515_161103.extcsd 5/15/2017 4:11:03 PM> EMMC Init completed. 5/15/2017 4:11:03 PM> 5/15/2017 4:11:03 PM> GPT header is found and is valid 5/15/2017 4:11:03 PM> Partition: SBOOT, [000000400000 - 000000600000], size: 000000200000 5/15/2017 4:11:03 PM> Partition: SBOOT2, [000000600000 - 000000800000], size: 000000200000 5/15/2017 4:11:03 PM> Partition: wfixnv1, [000000800000 - 000000900000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: wfixnv2, [000000900000 - 000000A00000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: tdfixnv1, [000000A00000 - 000000B00000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: tdfixnv2, [000000B00000 - 000000C00000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: WDSP, [000000C00000 - 000001000000], size: 000000400000 5/15/2017 4:11:03 PM> Partition: MODEM, [000001000000 - 000001800000], size: 000000800000 5/15/2017 4:11:03 PM> Partition: MODEM2, [000001800000 - 000002000000], size: 000000800000 5/15/2017 4:11:03 PM> Partition: TDDSP, [000002000000 - 000002400000], size: 000000400000 5/15/2017 4:11:03 PM> Partition: FOTA_SIG, [000002400000 - 000002500000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: wruntimenv1, [000002500000 - 000002600000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: wruntimenv2, [000002600000 - 000002700000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: tdruntimenv1, [000002700000 - 000002800000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: tdruntimenv2, [000002800000 - 000002900000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: PARAM, [000002900000 - 000002B00000], size: 000000200000 5/15/2017 4:11:03 PM> Partition: EFS, [000002B00000 - 000003F00000], size: 000001400000 5/15/2017 4:11:03 PM> Partition: PRODNV, [000003F00000 - 000004400000], size: 000000500000 5/15/2017 4:11:03 PM> Partition: RESERVED2, [000004400000 - 000004500000], size: 000000100000 5/15/2017 4:11:03 PM> Partition: KERNEL, [000004500000 - 000005500000], size: 000001000000 5/15/2017 4:11:03 PM> Partition: RECOVERY, [000005500000 - 000006500000], size: 000001000000 5/15/2017 4:11:03 PM> Partition: PERSDATA, [000006500000 - 000006E00000], size: 000000900000 5/15/2017 4:11:03 PM> Partition: CSC, [000006E00000 - 000013600000], size: 00000C800000 5/15/2017 4:11:03 PM> Partition: SYSTEM, [000013600000 - 000053C00000], size: 000040600000 5/15/2017 4:11:03 PM> Partition: HIDDEN, [000053C00000 - 000057600000], size: 000003A00000 5/15/2017 4:11:03 PM> Partition: USERDATA, [000057600000 - 0000E8200000], size: 000090C00000 5/15/2017 4:11:03 PM> GPT header successfully parsed 5/15/2017 4:11:03 PM> 5/15/2017 4:11:17 PM> Looking for EasyJTAG box... 5/15/2017 4:11:17 PM> EasyJTAG API ver. 2008 5/15/2017 4:11:17 PM> Setting IO Levels to 1.8V 5/15/2017 4:11:17 PM> Setting frequence to 14 Mhz 5/15/2017 4:11:17 PM> HiPower mode is OFF 5/15/2017 4:11:19 PM> OpenUSB returned = 0 5/15/2017 4:11:19 PM> Power Controller returned = 0 5/15/2017 4:11:19 PM> EasyJTAG Box Serial = 0F004000ABE54E43 5/15/2017 4:11:19 PM> EasyJTAG Box Firmware = 01.58 5/15/2017 4:11:19 PM> HiPower mode is OFF 5/15/2017 4:11:19 PM> CMD Pullup Level: 1742 mV 5/15/2017 4:11:19 PM> CMD Active Level: 1753 mV 5/15/2017 4:11:19 PM> eMMC Init returned = 0 5/15/2017 4:11:19 PM> EMMC Device Information : 5/15/2017 4:11:19 PM> EMMC CID: 90014A48344732621101377532439244 5/15/2017 4:11:19 PM> EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA 5/15/2017 4:11:19 PM> EMMC Manufacture Name: SKHYNIX 5/15/2017 4:11:19 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A 5/15/2017 4:11:19 PM> EMMC Manufacture Date: 9/2015 , Rev: 01 5/15/2017 4:11:19 PM> EMMC NAME: H4G2b , S/N: 37753243 , rev. 01 5/15/2017 4:11:20 PM> EMMC NAME (HEX): 483447326211 5/15/2017 4:11:20 PM> EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) 5/15/2017 4:11:20 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 5/15/2017 4:11:20 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) 5/15/2017 4:11:20 PM> EMMC Permanent Write Protection: No 5/15/2017 4:11:20 PM> EMMC Temporary Write Protection: No 5/15/2017 4:11:20 PM> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 5/15/2017 4:11:20 PM> Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1) 5/15/2017 4:11:20 PM> Boot Bus Config: 0x00 , width 1bit 5/15/2017 4:11:20 PM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled 5/15/2017 4:11:20 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 5/15/2017 4:11:20 PM> Device supports partitioning features 5/15/2017 4:11:20 PM> Device can have enhanced technological features in partitions and user data area 5/15/2017 4:11:20 PM> Device can have extended partitions attribute 5/15/2017 4:11:20 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 5/15/2017 4:11:20 PM> Backup saved: H4G2b_37753243_20170515_161120.extcsd 5/15/2017 4:11:20 PM> EMMC Init completed. 5/15/2017 4:11:20 PM> 5/15/2017 4:11:20 PM> Opening file: C:\Documents and Settings\!!!RAO\Desktop\J110HXXU0AOGA_ODD0AOG9_India_v4.4.4_Repair_Firmware\J1POP3G.pit 5/15/2017 4:11:20 PM> 5/15/2017 4:11:20 PM> Pit: J1POP3G.pit 5/15/2017 4:11:20 PM> Entry count: 30 5/15/2017 4:11:20 PM> 5/15/2017 4:11:20 PM> The size of the last section has been updated 5/15/2017 4:11:28 PM> Selected file: C:\Documents and Settings\!!!RAO\Desktop\J110HXXU0AOGA_ODD0AOG9_India_v4.4.4_Repair_Firmware\BL_J110HXXU0AOGA_CL737598_QB5784505_REV02_user_low_ship.tar.md5 5/15/2017 4:11:28 PM> 5/15/2017 4:11:28 PM> BL_J110HXXU0AOGA_CL737598_QB5784505_REV02_user_low_ship.tar.md5 5/15/2017 4:11:28 PM> The list of files in the firmware: 5/15/2017 4:11:28 PM> spl.img 5/15/2017 4:11:28 PM> sboot.bin 5/15/2017 4:11:28 PM> sboot2.bin 5/15/2017 4:11:28 PM> param.lfs 5/15/2017 4:11:28 PM> 5/15/2017 4:11:58 PM> Selected file: C:\Documents and Settings\!!!RAO\Desktop\J110HXXU0AOGA_ODD0AOG9_India_v4.4.4_Repair_Firmware\AP_J110HXXU0AOGA_CL737598_QB5784505_REV02_user_low_ship_.tar.md5 5/15/2017 4:11:58 PM> AP_J110HXXU0AOGA_CL737598_QB5784505_REV02_user_low_ship_.tar.md5 5/15/2017 4:11:58 PM> The list of files in the firmware: 5/15/2017 4:11:58 PM> boot.img 5/15/2017 4:11:58 PM> recovery.img 5/15/2017 4:11:58 PM> system.img 5/15/2017 4:11:58 PM> 5/15/2017 4:12:36 PM> Looking for EasyJTAG box... 5/15/2017 4:12:36 PM> EasyJTAG API ver. 2008 5/15/2017 4:12:36 PM> Setting IO Levels to 1.8V 5/15/2017 4:12:36 PM> Setting frequence to 14 Mhz 5/15/2017 4:12:36 PM> HiPower mode is OFF 5/15/2017 4:12:37 PM> OpenUSB returned = 0 5/15/2017 4:12:37 PM> Power Controller returned = 0 5/15/2017 4:12:37 PM> EasyJTAG Box Serial = XXXXXXXXXXXX 5/15/2017 4:12:37 PM> EasyJTAG Box Firmware = 01.58 5/15/2017 4:12:37 PM> HiPower mode is OFF 5/15/2017 4:12:38 PM> CMD Pullup Level: 1753 mV 5/15/2017 4:12:38 PM> CMD Active Level: 1763 mV 5/15/2017 4:12:38 PM> eMMC Init returned = 0 5/15/2017 4:12:38 PM> EMMC Device Information : 5/15/2017 4:12:38 PM> EMMC CID: 90014A48344732621101377532439244 5/15/2017 4:12:38 PM> EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA 5/15/2017 4:12:38 PM> EMMC Manufacture Name: SKHYNIX 5/15/2017 4:12:38 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A 5/15/2017 4:12:38 PM> EMMC Manufacture Date: 9/2015 , Rev: 01 5/15/2017 4:12:38 PM> EMMC NAME: H4G2b , S/N: 37753243 , rev. 01 5/15/2017 4:12:39 PM> EMMC NAME (HEX): 483447326211 5/15/2017 4:12:39 PM> EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) 5/15/2017 4:12:39 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 5/15/2017 4:12:39 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) 5/15/2017 4:12:39 PM> EMMC Permanent Write Protection: No 5/15/2017 4:12:39 PM> EMMC Temporary Write Protection: No 5/15/2017 4:12:39 PM> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 5/15/2017 4:12:39 PM> Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1) 5/15/2017 4:12:39 PM> Boot Bus Config: 0x00 , width 1bit 5/15/2017 4:12:39 PM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled 5/15/2017 4:12:39 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 5/15/2017 4:12:39 PM> Device supports partitioning features 5/15/2017 4:12:39 PM> Device can have enhanced technological features in partitions and user data area 5/15/2017 4:12:39 PM> Device can have extended partitions attribute 5/15/2017 4:12:39 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 5/15/2017 4:12:39 PM> Backup saved: H4G2b_37753243_20170515_161239.extcsd 5/15/2017 4:12:39 PM> EMMC Init completed. 5/15/2017 4:12:39 PM> 5/15/2017 4:12:39 PM> Operation: Write by vendor (Samsung) 5/15/2017 4:12:39 PM> 5/15/2017 4:12:39 PM> Creating GPT-partitioninig 5/15/2017 4:12:39 PM> Writing PIT at address: 000000080000 5/15/2017 4:12:39 PM> GPT-partitioning done 5/15/2017 4:12:39 PM> 5/15/2017 4:12:39 PM> Unpacking file: spl.img 5/15/2017 4:12:39 PM> Unpacking file: sboot.bin 5/15/2017 4:12:39 PM> Unpacking file: sboot2.bin 5/15/2017 4:12:39 PM> Unpacking file: param.lfs 5/15/2017 4:12:39 PM> Unpacking file: boot.img 5/15/2017 4:12:39 PM> Unpacking file: recovery.img 5/15/2017 4:12:39 PM> 5/15/2017 4:12:39 PM> Partition name: BOOT 5/15/2017 4:12:39 PM> Filename: spl.img , Offset: 000000000000 , filesize: 32768 bytes 5/15/2017 4:12:39 PM> eMMC switching to ROM2 5/15/2017 4:12:40 PM> Erasing partition... 5/15/2017 4:12:42 PM> Writing partition... 5/15/2017 4:12:42 PM> Done writing partition. Write speed: 239.75 Kb/s 5/15/2017 4:12:42 PM> Partition name: SBOOT 5/15/2017 4:12:42 PM> Filename: sboot.bin , Offset: 000000400000 , filesize: 1573888 bytes 5/15/2017 4:12:42 PM> eMMC switching to ROM1 5/15/2017 4:12:42 PM> Erasing partition... 5/15/2017 4:12:43 PM> Writing partition... 5/15/2017 4:12:44 PM> Done writing partition. Write speed: 1086.26 Kb/s 5/15/2017 4:12:44 PM> Partition name: SBOOT2 5/15/2017 4:12:44 PM> Filename: sboot2.bin , Offset: 000000600000 , filesize: 1573888 bytes 5/15/2017 4:12:44 PM> eMMC switching to ROM1 5/15/2017 4:12:45 PM> Erasing partition... 5/15/2017 4:12:45 PM> Writing partition... 5/15/2017 4:12:47 PM> Done writing partition. Write speed: 1084.61 Kb/s 5/15/2017 4:12:47 PM> Partition name: PARAM 5/15/2017 4:12:47 PM> Filename: param.lfs , Offset: 000002900000 , filesize: 634880 bytes 5/15/2017 4:12:47 PM> eMMC switching to ROM1 5/15/2017 4:12:47 PM> Erasing partition... 5/15/2017 4:12:48 PM> Writing partition... 5/15/2017 4:12:48 PM> Done writing partition. Write speed: 741.78 Kb/s 5/15/2017 4:12:48 PM> Partition name: KERNEL 5/15/2017 4:12:48 PM> Filename: boot.img , Offset: 000004500000 , filesize: 5567488 bytes 5/15/2017 4:12:48 PM> eMMC switching to ROM1 5/15/2017 4:12:49 PM> Erasing partition... 5/15/2017 4:12:50 PM> Writing partition... 5/15/2017 4:12:57 PM> Done writing partition. Write speed: 824.86 Kb/s 5/15/2017 4:12:57 PM> Partition name: RECOVERY 5/15/2017 4:12:57 PM> Filename: recovery.img , Offset: 000005500000 , filesize: 6898688 bytes 5/15/2017 4:12:57 PM> eMMC switching to ROM1 5/15/2017 4:12:57 PM> Erasing partition... 5/15/2017 4:12:59 PM> Writing partition... 5/15/2017 4:13:07 PM> Done writing partition. Write speed: 827.73 Kb/s 5/15/2017 4:13:07 PM> 5/15/2017 4:13:07 PM> All done 5/15/2017 4:13:07 PM> I Want To Try To Write Dump Direct To EMMC Now I Will Be Grateful To All Of You Thanks Anticipation |
Bookmarks |
| |
|