GSM-Forum - LG D605 - QC Identify error

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)

- - LG D605 - QC Identify error (https://forum.gsmhosting.com/vbb/f672/lg-d605-qc-identify-error-2547134/)

LG D605 - QC Identify error

Hi,
I've got a dead LG D605 that is detected in QDLoader 9008 mode, so i've try to identify it with the new Easy-Jtag Suite 3.4.0.2 but with this error:

Code:

QC Core Version 2.10

Using Port :COM4

Detecting Device mode...

Connecting to device without external programmers...

Device Class:dload

Device Protocol:streaming

Emergency Mode:true

Reading QC Device information...

Only devices with Sahara support this information

Operation status: 22 Unknown error (22)

QC Core Version 2.10

Using Port :COM4

Detecting Device mode...

Operation status: 16 Sync error , reconnect target and try again...

QC Core Version 2.10

Using Port :COM4

Detecting Device mode...

Connecting to device without external programmers...

Device Class:dload

Device Protocol:streaming

Emergency Mode:true

Reading QC Device information...

Only devices with Sahara support this information

Operation status: 22 Unknown error (22)

I have no idea on how to use the QC tool, i only use the Easy-Jtag suite for EMMC data recover and dead boot repair...
Can anyone help me with this smartphone?

A tutorial on how to use the QC Tool will be very appreciated...
Thanks

https://i.postimg.cc/qRd26m3m/Cattura.png

i have recieved lg f400L dead. pc only dedect qualcomm 9008 port. when i identify same this error. how to solve?

If i have understand how to use that...i need MSM8230 loader...right?

Quote:

Originally Posted by abu hena (Post 13502754)

i have recieved lg f400L dead. pc only dedect qualcomm 9008 port. when i identify same this error. how to solve?

you need desolder eMMC and test it - it may be totally dead

Quote:

Originally Posted by layder (Post 13506970)

you need desolder eMMC and test it - it may be totally dead

Same in my Lg...
It's recognisable only in qualcomm 9008 port mode...

Emmc seems ok, I've connect it to the box and it does not find any error but the userdata partition is not mountable...

Quote:

Originally Posted by Sakalalina (Post 13510847)

Same in my Lg...
It's recognisable only in qualcomm 9008 port mode...

Emmc seems ok, I've connect it to the box and it does not find any error but the userdata partition is not mountable...

Fixed writing boot config preset "Qualcomm 1" and then flashing the firmware with LGMobile...
Now i have just to repair the imei