micromax q372 dead boot

[Bhagat20]

q372 emmc logs:

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 Mhz
EMMC Device Information :
EMMC CID: 90014A48384731650507DD0938AE52E7
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G1e , EMMC NAME (HEX): 483847316500 , S/N: DD0938AE , rev. 0x07
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 5/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G1e_DD0938AE_20181027_185017.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x08 70% - 80% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x01 Normal

Get firmware version

Brand = Micromax
Manufacturer = Micromax
Model = Micromax Q372
Phone platform = mt6582
CPU Abi = armeabi-v7a
Mediatek platform = MT6582
Android release = 5.0
Firmware version = ALPS.L0.MP2.V1_TINNO6582.WT.L_P18
Firmware date = Sat Aug 22 18:57:42 CST 2015

please someone suggest how to repair the above emmc, step by step?

[layder]

Originally Posted by Bhagat20

q372 emmc logs:

please someone suggest how to repair the above emmc, step by step?

Mediatek phone simply flashing via Flashtool software from PC
You can flash only correct preloader via EasyJTAG Plus software from Write By Vendor - Mediatek tab

[Bhagat20]

Originally Posted by layder

Mediatek phone simply flashing via Flashtool software from PC
You can flash only correct preloader via EasyJTAG Plus software from Write By Vendor - Mediatek tab

Unable to flash with flash tool, giving error, that's why I flashed scatter file with easy jtag by vender, flashing successful but still it's showing in logs "warning- health report is very BAD", instead of showing partition, any way to repair that?

[layder]

Originally Posted by Bhagat20

Unable to flash with flash tool, giving error, that's why I flashed scatter file with easy jtag by vender, flashing successful but still it's showing in logs "warning- health report is very BAD", instead of showing partition, any way to repair that?

Change eMMC (blank with writed boot config) and flash phone via Flashtool from PC

[ibhandari]

Originally Posted by Bhagat20

Unable to flash with flash tool, giving error, that's why I flashed scatter file with easy jtag by vender, flashing successful but still it's showing in logs "warning- health report is very BAD", instead of showing partition, any way to repair that?

rehot power ic prob. solve.