GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus

Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
 
LinkBack Thread Tools Display Modes
Old 07-10-2014, 14:30   #1 (permalink)
No Life Poster
 
Join Date: Oct 2010
Location: colombo
Posts: 2,339
Member: 1418524
Status: Offline
Thanks Meter: 185
N7100 VTU00M Name 0000 Repair..


<br>
Z3X EasyJtag Software ver. 1.5.1.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.50
CMD Pullup Level:1309 mV
CMD Active Level:1753 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C

EMMC CSD : 902701320F5903FFF6DBFFEF8A404022

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: <b>000000</b> , S/N: 537986854
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20140604_1649.extcsd
Done.
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
<br>
Z3X EasyJtag Software ver. 1.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1309 mV
CMD Active Level:1753 mV
Repair VTU00M eMMC:
Entering repair mode 1...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 1...
Success
===================================
<font color="red">Please, Reconnect eMMC power lines and press 'VTU00M Repair' again</font>
===================================
<br>
Z3X EasyJtag Software ver. 1.5.1.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.50
CMD Pullup Level:1309 mV
CMD Active Level:1773 mV
eMMC Device Information
EMMC CID : 15010056545530304DF184B706757FDE

EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2012 Rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 2226587253
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_2226587253_20140604_1650.extcsd
Done.
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
<br>
Z3X EasyJtag Software ver. 1.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1309 mV
CMD Active Level:1773 mV
Repair VTU00M eMMC:
Entering repair mode 2...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 2...
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal

Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 3,1,2,6
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 48,50,49,45
All Erase counts (min,avg,max): 0,0,1
SLC Erase counts (min,avg,max): 0,0,1
MLC Erase counts (min,avg,max): 0,0,0
S.M.A.R.T Report Done !!!
<font color="green">Success</font>
<font color="green">EMMC repair Done</font>
<font color="green">Please don't forget to repair <b>extCSD</b> from backup!!!</font>
<font color="green">Please don't forget to configure <b>BOOT</b> sizes!!!</font>Exit repair mode 1...
Success
===================================
<font color="red">Please, Reconnect eMMC power lines and press 'VTU00M Repair' again</font>
===================================
<br>
Z3X EasyJtag Software ver. 1.5.1.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 1616FE1F0BFC123F, ,FW Ver.: 01.50
CMD Pullup Level:1309 mV
CMD Active Level:1773 mV
eMMC Device Information
EMMC CID : 15010056545530304DF184B706757FDE

EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 07/2012 Rev.0xf1
EMMC NAME: <b>VTU00M</b> , S/N: 2226587253
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_2226587253_20140604_1650.extcsd
Done.
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
<br>
Z3X EasyJtag Software ver. 1.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1309 mV
CMD Active Level:1773 mV
Repair VTU00M eMMC:
Entering repair mode 2...
Success
Erasing repair area...
Success
Writing repair area...
Success
Exit repair mode 2...
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal

Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 3,1,2,6
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 48,50,49,45
All Erase counts (min,avg,max): 0,0,1
SLC Erase counts (min,avg,max): 0,0,1
MLC Erase counts (min,avg,max): 0,0,0
S.M.A.R.T Report Done !!!
<font color="green">Success</font>
<font color="green">EMMC repair Done</font>
<font color="green">Please don't forget to repair <b>extCSD</b> from backup!!!</font>
<font color="green">Please don't forget to configure <b>BOOT</b> sizes!!!</font>



Please don't forget to configure <b>BOOT</b> sizes!
how repair configure boot
  Reply With Quote
Old 07-10-2014, 14:45   #2 (permalink)
No Life Poster
 
mscomp's Avatar
 
Join Date: Apr 2006
Location: Oued zenati Algeria
Age: 44
Posts: 1,215
Member: 266158
Status: Offline
Thanks Meter: 198
one bouton n7100 i9300 boot config in new version
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 16:45.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.14524 seconds with 8 queries

SEO by vBSEO