GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 11-06-2019, 21:44   #1 (permalink)
Freak Poster
 
cooldreams's Avatar
 
Join Date: Aug 2005
Location: Sri lanka
Age: 39
Posts: 438
Member: 171336
Status: Offline
Thanks Meter: 53
oppo a3s pattern unlock fail


oppo a3s pattern unlock fail


Z3X EasyJtag Software ver. 3.6.1.9
Loading eMMC GEN2 Firmware... IO: 1800 mV
Box S/N: 00DE01C70DA4A9B7, ,FW Ver.: 02.44
CMD Pullup Level:1542 mV
CMD Active Level:1876 mV
Box IO Level:1800 mV
CLK Rate:1000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536334D4203F996DE20A56D
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 10/2018 Rev.0x3
eMMC NAME: QE63MB , S/N: 4187414048
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
RPMB Info mmc_init Error, Reason: CMD Timeout Error
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Writing Recovery Command to MISC (35)
mmc_write_blocks(0x2FB00000 , 1000 ), Failed: CMD Timeout Error
Done.

help me to unlock
Attached Images
File Type: jpg Untitled.jpg (390.8 KB, 24 views)
  Reply With Quote
Old 11-06-2019, 22:46   #2 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 43
Posts: 1,490
Member: 13148
Status: Offline
Thanks Meter: 1,337
CMD Timeout error - bad connection, command to unlock not sended
  Reply With Quote
Old 11-07-2019, 05:42   #3 (permalink)
Freak Poster
 
cooldreams's Avatar
 
Join Date: Aug 2005
Location: Sri lanka
Age: 39
Posts: 438
Member: 171336
Status: Offline
Thanks Meter: 53
but check emmc ok
read soft partition ok

Quote:
Originally Posted by layder View Post
CMD Timeout error - bad connection, command to unlock not sended
how to solved this problem

Last edited by layder; 11-07-2019 at 08:18. Reason: merge posts
  Reply With Quote
Old 11-07-2019, 06:26   #4 (permalink)
Freak Poster
 
umar342's Avatar
 
Join Date: Feb 2010
Location: lalitpur up
Posts: 216
Member: 1246696
Status: Offline
Sonork: 100.1681950
Thanks Meter: 56
how to solved this problem




check vccq and vcc or insert cc cable
  Reply With Quote
Old 11-07-2019, 07:14   #5 (permalink)
Crazy Poster
 
Join Date: Nov 2011
Posts: 53
Member: 1689073
Status: Offline
Sonork: dgsimpao
Thanks Meter: 8
CMD Timeout error - check CMD connection or CMD resistor damaged
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 16:51.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.22404 seconds with 8 queries

SEO by vBSEO