Please add KMV3W000LM name "000000" repair - GSM-Forum

QuaNTuM-MoBilE · 07-10-2014, 20:02

Hello,
I have a dead S4 I9500 and emmc name detected as "000000". Would you considering to add repair feature to easy jtag in next update?

Here's the logs :

Code:

<br>
Z3X EasyJtag Software ver. 1.5.6.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0F0F010A3044387B, ,FW Ver.: 01.50
CMD Pullup Level:1093 mV
CMD Active Level:1794 mV
eMMC Device Information
EMMC CID : 150100303030303030562012063058CE

EMMC CSD : 902701320F5903FFF6DBFFEF8A404022

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005  Rev.0x56
EMMC NAME: <b>000000</b> , S/N:  538052144
EMMC ROM1 (Main User Data)   Capacity: 8192 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
  Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x00.
Backup saved: 000000_ 538052144_20140605_0132.extcsd
Done.
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1093 mV
CMD Active Level:1794 mV
Repair VTU00M eMMC:
Entering repair mode 1...
Success
Erasing repair area...
Warning Erasing repair area fail, Reason: DATA Status Error 
<font color="red">Please, Reconnect eMMC power lines and press 'VTU00M Repair' again</font>
===================================
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1093 mV
CMD Active Level:1794 mV
Repair VTU00M eMMC:
Entering repair mode 1...
Erasing repair area...
Success
Writing repair area...
Can't write repair area, Reason: CMD CRC Error 
<font color="red">Please, Reconnect eMMC power lines and press 'VTU00M Repair' again</font>
===================================
Running:SAMSUNG: MoviNAND VTU00M Name 0000 Repair...
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1093 mV
CMD Active Level:1794 mV
Repair VTU00M eMMC:
Entering repair mode 1...
Success
Erasing repair area...
Warning Erasing repair area fail, Reason: DATA Status Error 
<font color="red">Please, Reconnect eMMC power lines and press 'VTU00M Repair' again</font>
===================================
<br>
Z3X EasyJtag Software ver. 1.5.6.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 0F0F010A3044387B, ,FW Ver.: 01.50
CMD Pullup Level:1103 mV
CMD Active Level:1588 mV
eMMC Device Information
EMMC CID : 1501003030303030333333330630584A

EMMC CSD : 902701320F5903FFF6DBFFEF8A404022

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005  Rev.0x33
EMMC NAME: <b>000003</b> , S/N:  858981936
EMMC ROM1 (Main User Data)   Capacity: 8192 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
  Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x00.
Backup saved: 000003_ 858981936_20140605_0132.extcsd
Done.

Screenshots:

**blang** · 07-10-2014, 23:15

i think not possible add in next update.
this not so easy.

may be will be added in future updates .

mscomp · 07-13-2014, 13:07

some times if smart read is ok phone can be alive with rom 2 (with emmc name 0000)
i have done this and phone had always emmc 0000 but it alive

07-10-2014, 23:15	#2 (permalink)
blang Product Manager Join Date: Oct 2000 Location: future Posts: 22,431 Member: 2368 Status: Offline Sonork: 100.111111 Thanks Meter: 186,557	i think not possible add in next update. this not so easy. may be will be added in future updates .

07-13-2014, 13:07	#3 (permalink)
mscomp No Life Poster Join Date: Apr 2006 Location: Oued zenati Algeria Age: 44 Posts: 1,215 Member: 266158 Status: Offline Sonork: 131654654654 Thanks Meter: 198	some times if smart read is ok phone can be alive with rom 2 (with emmc name 0000) i have done this and phone had always emmc 0000 but it alive