please fix easy jtag plus bug - GSM-Forum

royalnasim · 07-28-2018, 07:57

easy jtag v1 box log

7/28/2018 11:53:26 AM> EasyJTAG Box Firmware = 1.62
7/28/2018 11:53:28 AM> Setting frequence to 21 Mhz
7/28/2018 11:53:28 AM> CMD Pullup Level: 2021 mV
7/28/2018 11:53:28 AM> CMD Active Level: 2526 mV
7/28/2018 11:53:28 AM> eMMC Init returned = 0
7/28/2018 11:53:28 AM> EMMC Device Information :
7/28/2018 11:53:28 AM> EMMC CID: 150100434A4E423452109238591D2432
7/28/2018 11:53:28 AM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
7/28/2018 11:53:28 AM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: CJNB4R , EMMC NAME (HEX): 434A4E423452 , S/N: 9238591D , rev. 0x10
7/28/2018 11:53:28 AM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2017
7/28/2018 11:53:28 AM> EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
7/28/2018 11:53:28 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
7/28/2018 11:53:28 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
7/28/2018 11:53:28 AM> EMMC Permanent Write Protection: No
7/28/2018 11:53:28 AM> EMMC Temporary Write Protection: No
7/28/2018 11:53:28 AM> Extended CSD Information :
7/28/2018 11:53:28 AM> Extended CSD rev: 1.8 (MMC 5.1)
7/28/2018 11:53:28 AM> Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
7/28/2018 11:53:28 AM> Boot Bus Config: 0x00 , width 1bit
7/28/2018 11:53:28 AM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
7/28/2018 11:53:28 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
7/28/2018 11:53:28 AM> Device supports partitioning features
7/28/2018 11:53:28 AM> Device can have enhanced technological features in partitions and user data area
7/28/2018 11:53:28 AM> Device can have extended partitions attribute
7/28/2018 11:53:28 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
7/28/2018 11:53:28 AM> Backup saved: CJNB4R_9238591D_20180728_115328.extcsd
7/28/2018 11:53:28 AM> EMMC Init completed.
7/28/2018 11:53:28 AM>
7/28/2018 11:53:28 AM> Operation: Erase all eMMC Regions at once
7/28/2018 11:53:28 AM>
7/28/2018 11:53:28 AM> eMMC switching to ROM2
7/28/2018 11:53:28 AM> Erasing partition...
7/28/2018 11:53:45 AM> Done erasing partition.
7/28/2018 11:53:45 AM>
7/28/2018 11:53:45 AM> eMMC switching to ROM3
7/28/2018 11:53:45 AM> Erasing partition...
7/28/2018 11:54:02 AM> Done erasing partition.
7/28/2018 11:54:02 AM>
7/28/2018 11:54:02 AM> eMMC switching to ROM1
7/28/2018 11:54:02 AM> Erasing partition...

easy jtag plus v2 box log

7/28/2018 12:21:28 PM> EasyJTAG Box Firmware = 2.29
7/28/2018 12:21:29 PM> Setting interface to EasyJtag2/ISP
7/28/2018 12:21:29 PM> Setting bus width to 1 Bit
7/28/2018 12:21:29 PM> Setting frequence to 18 Mhz
7/28/2018 12:21:29 PM> CMD Pullup Level: 2116 mV
7/28/2018 12:21:29 PM> CMD Active Level: 2581 mV
7/28/2018 12:21:29 PM> eMMC Init returned = 0
7/28/2018 12:21:29 PM> EMMC Device Information :
7/28/2018 12:21:29 PM> EMMC CID: 150100434A4E423452109238591D2433
7/28/2018 12:21:29 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
7/28/2018 12:21:29 PM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: CJNB4R , EMMC NAME (HEX): 434A4E423452 , S/N: 9238591D , rev. 0x10
7/28/2018 12:21:29 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2017
7/28/2018 12:21:29 PM> EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
7/28/2018 12:21:29 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
7/28/2018 12:21:29 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
7/28/2018 12:21:29 PM> EMMC Permanent Write Protection: No
7/28/2018 12:21:29 PM> EMMC Temporary Write Protection: No
7/28/2018 12:21:29 PM> Extended CSD Information :
7/28/2018 12:21:29 PM> Extended CSD rev: 1.8 (MMC 5.1)
7/28/2018 12:21:29 PM> Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
7/28/2018 12:21:29 PM> Boot Bus Config: 0x00 , width 1bit
7/28/2018 12:21:29 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
7/28/2018 12:21:29 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
7/28/2018 12:21:29 PM> Device supports partitioning features
7/28/2018 12:21:29 PM> Device can have enhanced technological features in partitions and user data area
7/28/2018 12:21:29 PM> Device can have extended partitions attribute
7/28/2018 12:21:29 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
7/28/2018 12:21:29 PM> Backup saved: CJNB4R_9238591D_20180728_122129.extcsd
7/28/2018 12:21:29 PM> EMMC Init completed.
7/28/2018 12:21:29 PM>
7/28/2018 12:21:29 PM> Operation: Erase all eMMC Regions at once
7/28/2018 12:21:29 PM>
7/28/2018 12:21:29 PM> eMMC switching to ROM2
7/28/2018 12:21:29 PM> Erasing partition...
7/28/2018 12:21:30 PM> Error erasing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:30 PM> Error erasing at address: 000000010000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:30 PM> Error erasing at address: 000000010000 , error: -8, DATA SND CRC Error ... Retry #2
7/28/2018 12:21:30 PM> Error erasing at address: 000000048000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:31 PM> Error erasing at address: 000000048000 , error: -8, DATA SND CRC Error ... Retry #2
7/28/2018 12:21:31 PM> Error erasing at address: 000000048000 , error: -8, DATA SND CRC Error ... Retry #3
7/28/2018 12:21:31 PM> Error erasing at address: 000000050000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:31 PM> Error erasing at address: 000000068000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:32 PM> Error erasing at address: 000000070000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:32 PM> Error erasing at address: 000000080000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:32 PM> Error erasing at address: 000000080000 , error: -8, DATA SND CRC Error ... Retry #2
7/28/2018 12:21:32 PM> Error erasing at address: 000000090000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:33 PM> Error erasing at address: 0000000E0000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:33 PM> Error erasing at address: 0000000E8000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:34 PM> Error erasing at address: 0000000E8000 , error: -8, DATA SND CRC Error ... Retry #2
7/28/2018 12:21:34 PM> Error erasing at address: 0000000E8000 , error: -8, DATA SND CRC Error ... Retry #3
7/28/2018 12:21:34 PM> Error erasing at address: 0000000F0000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:34 PM> Error erasing at address: 0000000F0000 , error: -8, DATA SND CRC Error ... Retry #2
7/28/2018 12:21:35 PM> Error erasing at address: 000000148000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:35 PM> Error erasing at address: 000000158000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:36 PM> Error erasing at address: 000000178000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:36 PM> Error erasing at address: 000000188000 , error: -8, DATA SND CRC Error ... Retry #1
7/28/2018 12:21:36 PM> Error erasing at address: 000000188000 , error: -8, DATA SND CRC Error ... Retry #2
7/28/2018 12:21:36 PM> Error erasing at address: 000000190000 , error: -8, DATA SND CRC Error ... Retry #1

latest version also same problem

layder · 07-28-2018, 11:05

-8 error, -3 error (CRC error) - box firmware problem. We try to fix it at new box firmware version

this problem are detect at some boxes, but we can't view this problem at own boxes

07-28-2018, 11:05	#2 (permalink)
layder Product Supporter Join Date: Jun 2002 Location: Belarus Age: 47 Posts: 3,187 Member: 13148 Status: Offline Thanks Meter: 2,948	-8 error, -3 error (CRC error) - box firmware problem. We try to fix it at new box firmware version this problem are detect at some boxes, but we can't view this problem at own boxes