GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 10-30-2013, 20:04   #151 (permalink)
Freak Poster
 
Join Date: Feb 2004
Age: 47
Posts: 320
Member: 54024
Status: Offline
Thanks Meter: 25

s5570i

EasyJtag Suite ver.: 1.0.81.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5570I Config ver.:1.00
I/O Level set to : 3000 mV
Box S/N: 1xxxxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: BCM21553
CPU IDCODE : 0x07B3617F Mfg.: 0x0bf, Part: 0x7b36, Ver.: 0x0
CPU Manufacturer: SST/Broadcom , CPU Name: BCM21553
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:4096 bytes , Block size:64 pages
NAND Writing BCM_BOOT...
NAND Write OK! Elapsed time: 1.984375s (133.039 KiB/s)
NAND Writing SBL1...
NAND Write OK! Elapsed time: 15.750000s (134.095 KiB/s)
NAND Writing SBL2...
NAND Write OK! Elapsed time: 15.750000s (134.095 KiB/s)
NAND Writing PIT...
NAND Write OK! Elapsed time: 1.968750s (134.095 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 7.890625s (133.830 KiB/s)
All Done.

but phone not enter download mode
  Reply With Quote
Old 10-30-2013, 20:19   #152 (permalink)
Registered User
 
Join Date: Apr 2010
Location: madurai thirumangalam
Posts: 278
Member: 1286002
Status: Offline
Sonork: who are you
Thanks Meter: 22
samsung i5503 easy repair boot... working



Uploaded with ImageShack.us

Last edited by reegam777; 10-30-2013 at 20:28.
  Reply With Quote
Old 11-01-2013, 16:18   #153 (permalink)
Freak Poster
 
Gsm::Boiragi::'s Avatar
 
Join Date: Sep 2012
Posts: 277
Member: 1816848
Status: Offline
Thanks Meter: 52
S5830 one click repair success

Quote:
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.81.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5830 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 0E0E0621C327902C ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 15.208870s (104.150 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 5.011287s (105.362 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 7.511430s (105.439 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 20.069147s (105.236 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 10.180582s (103.727 KiB/s)
All Done.
  Reply With Quote
Old 11-01-2013, 17:59   #154 (permalink)
Freak Poster
 
Join Date: Dec 2012
Location: Brazil
Posts: 216
Member: 1859706
Status: Offline
Sonork: 100.1648492
Thanks Meter: 25
S5830B EFS repair success (S5830 file)

  Reply With Quote
Old 11-04-2013, 08:13   #155 (permalink)
No Life Poster
 
naushad09's Avatar
 
Join Date: Jan 2006
Location: E a r T h
Posts: 731
Member: 216094
Status: Offline
Thanks Meter: 312
Donate money to this user
S5830 dead boot sucess

  Reply With Quote
The Following User Says Thank You to naushad09 For This Useful Post:
Old 11-04-2013, 15:22   #156 (permalink)
No Life Poster
 
dicle_gsm's Avatar
 
Join Date: Jul 2007
Posts: 2,179
Member: 539148
Status: Offline
Thanks Meter: 2,142
S5830 Boot Repair Done !!!

Quote:
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 15.000000s (105.600 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 5.000000s (105.600 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 7.500000s (105.600 KiB/s)
NAND Writing EFS2...
NAND Write OK! Elapsed time: 90.359375s (105.180 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 20.015
NAND Writing UPCH...
NAND Write OK! Elapsed time: 10.156250s (103.975 KiB/s)
All Done.

BR,

Dicle_Gsm
  Reply With Quote
The Following User Says Thank You to dicle_gsm For This Useful Post:
Old 11-06-2013, 16:37   #157 (permalink)
No Life Poster
 
Pastime_GSM's Avatar
 
Join Date: Aug 2012
Location: In the paradise
Posts: 1,720
Member: 1798174
Status: Offline
Sonork: 100.114149
Thanks Meter: 771
s5830 rapair done

EasyJtag Suite ver.: 1.0.83.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-S5830 Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 18180319A12EEE3A ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x00000000 Mfg.: 0x000, Part: 0x0000, Ver.: 0x0
Halting CPU...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing MIBIB...
NAND Write OK! Elapsed time: 15.734375s (100.671 KiB/s)
NAND Writing QCSBL...
NAND Write OK! Elapsed time: 5.359375s (98.519 KiB/s)
NAND Writing OEMSBL1...
NAND Write OK! Elapsed time: 7.828125s (101.174 KiB/s)
NAND Writing APPSBL...
NAND Write OK! Elapsed time: 20.984375s (100.646 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 10.546875s (100.124 KiB/s)
All Done.
  Reply With Quote
The Following User Says Thank You to Pastime_GSM For This Useful Post:
Old 11-06-2013, 18:28   #158 (permalink)
Freak Poster
 
Join Date: Dec 2012
Location: Brazil
Posts: 216
Member: 1859706
Status: Offline
Sonork: 100.1648492
Thanks Meter: 25
S5570B Dead boot repair done.



Connecting to Target...
Warn: JTAG device: MSM7227
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
Warn: CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Initialize hardware...
Starting target communication...
Warn: Detecting nand memory parameters ...

NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found

NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages

NAND Writing MIBIB...
Warn: NAND Write OK! Elapsed time: 15.054027s (105.221 KiB/s)

NAND Writing QCSBL...
Warn: NAND Write OK! Elapsed time: 5.023208s (105.112 KiB/s)

NAND Writing OEMSBL1...
Warn: NAND Write OK! Elapsed time: 7.534814s (105.112 KiB/s)

NAND Writing EFS2...
Warn: NAND Write OK! Elapsed time: 90.715157s (104.768 KiB/s)

NAND Writing APPSBL...
Warn: NAND Write OK! Elapsed time: 20.108435s (105.031 KiB/s)

NAND Writing UPCH...
Warn: NAND Write OK! Elapsed time: 10.202418s (103.505 KiB/s)

All Done.
  Reply With Quote
The Following User Says Thank You to lunno For This Useful Post:
Old 11-07-2013, 21:28   #159 (permalink)
No Life Poster
 
Join Date: Oct 2008
Age: 32
Posts: 604
Member: 882614
Status: Offline
Sonork: 100.1608795
Thanks Meter: 136
i9070p repair boot done

EasyJtag Suite ver.: 1.0.79.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9070P Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: =-=-=---=-= ,FW Ver.: 01.47
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
  Reply With Quote
The Following User Says Thank You to reda86 For This Useful Post:
Old 11-08-2013, 16:35   #160 (permalink)
Freak Poster
 
R3İS's Avatar
 
Join Date: Jun 2009
Location: Turkey
Posts: 473
Member: 1058593
Status: Offline
Sonork: 100.1625725
Thanks Meter: 430
gt-i9082

I did repair i9082 rom2 problem workıng well for this model no need change emmc hahaa
  Reply With Quote
Old 11-09-2013, 17:41   #161 (permalink)
No Life Poster
 
Join Date: Apr 2006
Location: Al-Ahsa Saudi Arabia
Age: 29
Posts: 5,035
Member: 253510
Status: Offline
Sonork: 100.1672352
Thanks Meter: 3,527
I9000 Easy repair done :)

its very easy to repair boot with easy jtag!

done boot repair easy with easy jtag:

EasyJtag Suite ver.: 1.0.70.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
Successefuly connected to box on COM21
Box S/N: **************, ,FW Ver.: 01.47
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AA7A-2A3A
Z3X Card Version : 22
Z3X Card Activation [JTAG] : 1
Resources ver. : MainRC ver.OCD040Z001 (C)2012 z3x-team.com
Loading repair file: 'E:\BOX DATA\Easy Jtag\SAMSUNG\GT-I9000\Samsung-GT-i9000.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9000, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.70.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9000 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: ****************6 ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC110
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing BOOT...
NAND Write OK! Elapsed time: 2.421875s (109.006 KiB/s)
NAND Writing PIT...
NAND Write OK! Elapsed time: 1.156250s (228.324 KiB/s)
NAND Writing SBL1...
NAND Write OK! Elapsed time: 17.296875s (76.314 KiB/s)
NAND Writing SBL2...
NAND Write OK! Elapsed time: 15.843750s (83.314 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 1.015625s (1039.754 KiB/s)
All Done.
  Reply With Quote
The Following User Says Thank You to .::M Irfan::. For This Useful Post:
Old 11-10-2013, 06:48   #162 (permalink)
Freak Poster
 
Join Date: Dec 2012
Location: philippines
Posts: 134
Member: 1856544
Status: Offline
Sonork: 100.1606364
Thanks Meter: 23
s3850 deadboot/revive by eazy jtag tool

  Reply With Quote
Old 11-10-2013, 12:37   #163 (permalink)
No Life Poster
 
..::Rizwan::..'s Avatar
 
Join Date: May 2008
Posts: 3,166
Member: 777415
Status: Offline
Sonork: 1589702
Thanks Meter: 1,417
Donate money to this user
Samsung I9070 Boot Reapir Done

Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.85.0 started.
Operating system ver.: Windows 7 (build 7600).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9070 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: XXXXXXXXXXXX ,FW Ver.: 01.47
Connecting to Target...
U8500 Connection Fail
Please, install U8500 USB ROM driver, check power and USB connection !!!
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT...
eMMC Write OK! Elapsed time: 0.390625s (327.680 KiB/s)
EMMC Writing XLOADER...
eMMC Write OK! Elapsed time: 4.687500s (81.920 KiB/s)
EMMC Writing PIT...
eMMC Write OK! Elapsed time: 4.125977s (248.184 KiB/s)
EMMC Writing STE MEM INIT...
eMMC Write OK! Elapsed time: 2.625000s (195.048 KiB/s)
EMMC Writing PWR MGT...
eMMC Write OK! Elapsed time: 3.343750s (153.121 KiB/s)
EMMC Writing SBL...
eMMC Write OK! Elapsed time: 17.500977s (117.022 KiB/s)
EMMC Writing SBL2...
eMMC Write OK! Elapsed time: 18.032227s (113.574 KiB/s)
All Done.
  Reply With Quote
Old 11-12-2013, 06:58   #164 (permalink)
Banned
 
Join Date: Apr 2008
Posts: 964
Member: 762819
Status: Offline
Thanks Meter: 230
I9000 successfully Repaired. thanks to z3x team (It was my 1st experience, I bought z3x pro 2 days ago) Here is the log

Connecting to Target...
Warn: JTAG device: S5PC110
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
Warn: CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Warn: Detecting nand memory parameters ...

NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found

NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages

NAND Writing BOOT...
Warn: NAND Write OK! Elapsed time: 1.750000s (150.857 KiB/s)

NAND Writing PIT...
Warn: NAND Write OK! Elapsed time: 0.750000s (352.000 KiB/s)

NAND Writing SBL1...
Warn: NAND Write OK! Elapsed time: 9.734375s (135.602 KiB/s)

NAND Writing SBL2...
Warn: NAND Write OK! Elapsed time: 9.546875s (138.265 KiB/s)

NAND Writing UPCH...
Warn: NAND Write OK! Elapsed time: 1.015625s (1039.754 KiB/s)

All Done.
  Reply With Quote
Old 11-12-2013, 11:46   #165 (permalink)
Freak Poster
 
Join Date: Feb 2004
Age: 47
Posts: 320
Member: 54024
Status: Offline
Thanks Meter: 25
i9000 repair ok

Loading repair file: 'G:\easy-jtag\9. Easy Jtag files\Samsung\GT-I9000\Repair\Samsung-GT-i9000.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9000, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.82.0 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9000 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: xxxxxxxxxxxxxxxxxx ,FW Ver.: 01.47
Connecting to Target...
JTAG device: S5PC110
CPU IDCODE : 0x1BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A8
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00EC:0050 'NAND 512MB 1.8V 16-bit (Samsung)' found
NAND geometry: Blocks:00000800, Page size:1024 bytes , Block size:256 pages
NAND Writing BOOT...
NAND Write OK! Elapsed time: 1.359480s (194.192 KiB/s)
NAND Writing PIT...
NAND Write OK! Elapsed time: 0.687553s (383.970 KiB/s)
NAND Writing SBL1...
NAND Write OK! Elapsed time: 9.203831s (143.419 KiB/s)
NAND Writing SBL2...
NAND Write OK! Elapsed time: 9.203832s (143.419 KiB/s)
NAND Writing UPCH...
NAND Write OK! Elapsed time: 0.921946s (1145.403 KiB/s)
All Done.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:44.



Powered by Searchlight © 2018 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.20682 seconds with 8 queries

SEO by vBSEO