Post here succesfull JTAG and eMMC operations with Easy-Jtag: - Page 38 - GSM-Forum

omi17 · 09-12-2017, 15:58

Coolpad Dazen 1 ISP/Jtag(Unbrick/Debrick/Brick fix)

mrsp · 09-14-2017, 06:45

HiPower mode is OFF
Frequence: 14 Mhz
CMD Pullup Level: 2155 mV
CMD Active Level: 2454 mV
Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]

error on g530h by easy jtag

Deepesh Sharma · 10-12-2017, 11:16

Samsung J7 dead recover

Yashbanswara · 10-13-2017, 11:39

Quote:

Originally Posted by Deepesh Sharma

Samsung J7 dead recover

Sorry Sir I Asking You But

Some Days Ago I was do Samsung Galaxy J7 2016 SM-J710F/DS EMMC & DEAD Boot Repair & Flash Done Successfully But Nothing Showing On Screen & I Was Change 3 Combo But Problem Still Same

http://forum.gsmhosting.com/vbb/12580268-post540.html

http://forum.gsmhosting.com/vbb/f672...lp-me-2241575/

So Sir Please Help Me.

Thanks & Regards By:
Gopal Parmar

venkatesh420 · 10-17-2017, 08:01

Easy jtag showing error at any time
Can’t initiate device reason cmd timeout error

Sent from my iPhone using Tapatalk

nagesss · 10-18-2017, 11:55

Cant write rom1 user area from the dump file in c 2305 sony.....writing boot 1 boot 2 sucess full...
Any solution

Sent from my Moto G (4) using Tapatalk

ilyasrao · 10-24-2017, 08:28

SC-04f DEAD BOOT RECOVERED

HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1742 mV
CMD Active Level: 2279 mV
EMMC Device Information :
EMMC CID: 1101003033324745340422B3E13B91FE
EMMC CSD: D05E00320F5903FFFFFFFFEF924000D2
EMMC Manufacture Name: TOSHIBA
EMMC NAME: 032GE4 , S/N: 22B3E13B , rev. 04
EMMC NAME (HEX): 303332474534
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Backup saved: 032GE4_22B3E13B_20171015_175947.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: apnhlos, [000000400000 - 000001300000], size: 000000F00000
Partition: modem, [000001300000 - 000004C70000], size: 000003970000
Partition: sbl1, [000004C70000 - 000004CF0000], size: 000000080000
Partition: dbi, [000004CF0000 - 000004D00000], size: 000000010000
Partition: ddr, [000004D00000 - 000004D08000], size: 000000008000
Partition: aboot, [000004D08000 - 000004F08000], size: 000000200000
Partition: rpm, [000004F08000 - 000004F88000], size: 000000080000
Partition: tz, [000004F88000 - 000005008000], size: 000000080000
Partition: fsg, [000005008000 - 000005308000], size: 000000300000
Partition: pad, [000005308000 - 000005A00000], size: 0000006F8000
Partition: param, [000005A00000 - 000006400000], size: 000000A00000
Partition: efs, [000006400000 - 000007200000], size: 000000E00000
Partition: modemst1, [000007200000 - 000007500000], size: 000000300000
Partition: modemst2, [000007500000 - 000007800000], size: 000000300000
Partition: boot, [000007800000 - 000008500000], size: 000000D00000
Partition: recovery, [000008500000 - 000009400000], size: 000000F00000
Partition: fota, [000009400000 - 00000A100000], size: 000000D00000
Partition: backup, [00000A100000 - 00000A7FDC00], size: 0000006FDC00
Partition: fsc, [00000A7FDC00 - 00000A7FE000], size: 000000000400
Partition: ssd, [00000A7FE000 - 00000A800000], size: 000000002000
Partition: persist, [00000A800000 - 00000B000000], size: 000000800000
Partition: persdata, [00000B000000 - 00000B900000], size: 000000900000
Partition: system, [00000B900000 - 0000AE100000], size: 0000A2800000
Partition: cache, [0000AE100000 - 0000BA900000], size: 00000C800000
Partition: hidden, [0000BA900000 - 0000BB300000], size: 000000A00000
Partition: userdata, [0000BB300000 - 000747BFBE00], size: 00068C8FBE00
GPT header successfully parsed

Get firmware version

Brand = samsung
Model = SC-04F
Phone platform = msm8974
CPU Abi = armeabi-v7a
Android release = 6.0.1

DUMP LINK https://www.4shared.com/rar/eHyT2Xsd...1XPH3_v60.html
PINOUTS ARE IN DUMP FILE

pintu_das · 10-29-2017, 05:42

samsung s7562 automatically turned on when off solve with easy jtag

[IMG]

[/IMG]

Quote:

Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite Classic ver.: 2.6.0.1 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7601, Service Pack 1). Admin righ
For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...
OK
Initialising: Samsung GT-S7562 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 0900301095CE53A5 ,FW Ver.: 01.60
Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227A
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x01000015 Name : JJS00A Size : 3.6 G , (7634944) Blocks
EMMC #1 : ID : 0x01000015 Name : JJS00A Size : 1.0 M , (2048) Blocks
eMMC flash device(s) found, Device ID : 0x00150000
NAND Writing QCSBL...
eMMC Write OK! Elapsed time: 3.503200s (73.076 KiB/s)
NAND Writing MODEM...
eMMC Write OK! Elapsed time: 315.247040s (64.965 KiB/s)
NAND Writing PRT5...
eMMC Write OK! Elapsed time: 32.679871s (120.120 KiB/s)
NAND Writing OEMSBL...
eMMC Write OK! Elapsed time: 12.425711s (77.259 KiB/s)
NAND Writing APPSBL...
eMMC Write OK! Elapsed time: 11.511658s (83.394 KiB/s)
NAND Writing PIT...
eMMC Write OK! Elapsed time: 4.299245s (119.091 KiB/s)
NAND Writing MD5...
eMMC Write OK! Elapsed time: 16.590948s (123.441 KiB/s)
All Done.

omi17 · 10-29-2017, 18:54

Moto G3 Turbo Edition XT1557 Ota Dead Repair Done

omi17 · 10-29-2017, 18:56

MOTO X PLAY XT1562 OTA dead repair done

SVH · 10-30-2017, 10:40

Extracting contacts and sms from emmc with JTAG File Manager:

Code:

Save Android Data

Searching Partition [UserData]..
Partition #10 is [/data]. Mount..
Scanning for data..

Checking Contacts Database..
Found [contacts2.db], Reading..
File [contacts2.db] Saved..
Found Restore Info. Saving..
Restore Info Saved.

Checking CallLog Database..
CallLog Database NOT Found! Skip..

Checking Messages Database..
Found [mmssms.db], Reading..
File [mmssms.db] Saved..
Found Restore Info. Saving..
Restore Info Saved.

Checking WhatsApp Database..
WhatsApp Database NOT Found! Skip..

Checking Viber Database..
Found [viber_messages], Reading..
File [viber_messages.db] Saved..

Saving Files Done. Unmount [/data]..

=================
Extracting Data
=================

Scanning <CONTACTS> Database..
Init database engine..
SQLite Version: 3.20.1
Database Open. Checking Struct..

Checking Tables..
Table <ACCOUNTS> Found. Loading..
Found 6 Account(s)..
Get Account(s) from base..
Done 6 Account(s)
Saving Data..
Done Saving 6 accounts to <Accounts.txt>, <Accounts.html>

Table <CALLS> Found. Loading..
Found 0 Call(s)..
Table <CALLS> Is Empty. Skip..
Table <CONTACTS> Found. Loading..
Scanning MimeTypes..
Found 19 MimeType(s)..
Get MimeType(s) from base..
Done 19 MimeType(s)

Processing Contacts...
Found 1399 Contact(s)..
Processing data..
Done 1399 record(s)..
Saving Data..
Done Saving 1382 contacts to <Contacts.txt>
Done Saving 1382 Contacts to <Contacts.html>
Done Saving 1382 VCF records to <Contacts_VCF.vcf>

Database Closed

Scanning <MESSAGES> Database..
Init database engine..
SQLite Version: 3.20.1
Database Open. Checking Struct..

Checking Tables..
Table <SMS> Found. Loading..
Found 766 Message(s)..
Get Message(s) from base..
Done 766 Message(s)
Saving Data..
Done Saving 766 Messages to <Messages.txt>, <Messages.html>

Database Closed

Done!

venkatesh420 · 10-31-2017, 10:21

Iam buy new easy jtag
But it’s saying error at any time
*Can’t initiate device Reason cmd timeout error*
Plzzz help me
How to solve this

Sent from my iPhone using Tapatalk

Deepesh Sharma · 11-01-2017, 06:42

Dead Recover

Deepesh Sharma · 11-11-2017, 11:54

s7582 dead recover with easy repair after set goes on download mode after flash with odin set working fine

GsmKotla · 11-12-2017, 11:29

Connecting to Target...
JTAG device: MSM7225A
CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227A
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x01000015 Name : JJS00A Size : 3.6 G , (7634944) Blocks
EMMC #1 : ID : 0x01000015 Name : JJS00A Size : 1.0 M , (2048) Blocks
eMMC flash device(s) found, Device ID : 0x00150000
NAND Writing QCSBL...
eMMC Write OK! Elapsed time: 3.527202s (72.579 KiB/s)
NAND Writing MODEM...
eMMC Write OK! Elapsed time: 318.841248s (64.233 KiB/s)
NAND Writing PRT5...
eMMC Write OK! Elapsed time: 33.171898s (118.338 KiB/s)
NAND Writing OEMSBL...
eMMC Write OK! Elapsed time: 12.156695s (78.969 KiB/s)
NAND Writing APPSBL...
eMMC Write OK! Elapsed time: 11.605664s (82.718 KiB/s)
NAND Writing PIT...
eMMC Write OK! Elapsed time: 4.358250s (117.478 KiB/s)
NAND Writing MD5...
eMMC Write OK! Elapsed time: 16.786961s (121.999 KiB/s)
All Done.

09-12-2017, 15:58	#556 (permalink)
omi17 No Life Poster Join Date: May 2013 Location: In Core Of eMMC Posts: 685 Member: 1950912 Status: Offline Sonork: 100.1654643(Offline) Thanks Meter: 403	Coolpad Dazen 1 ISP/Jtag Service(Unbrick/Debrick/Brick fix) Coolpad Dazen 1 ISP/Jtag(Unbrick/Debrick/Brick fix)

10-12-2017, 11:16	#558 (permalink)
Deepesh Sharma No Life Poster Join Date: May 2010 Location: Incredible-India Posts: 6,018 Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297	Samsung J7(j700F) Dead Boot Reapir Samsung J7 dead recover

10-29-2017, 18:54	#564 (permalink)
omi17 No Life Poster Join Date: May 2013 Location: In Core Of eMMC Posts: 685 Member: 1950912 Status: Offline Sonork: 100.1654643(Offline) Thanks Meter: 403	Moto G3 Turbo Edition XT1557 Ota Dead Repair Done Moto G3 Turbo Edition XT1557 Ota Dead Repair Done Last edited by omi17; 10-29-2017 at 18:58. Reason: Moto G3 Turbo Edition XT1557 Ota Dead Repair Done

10-29-2017, 18:56	#565 (permalink)
omi17 No Life Poster Join Date: May 2013 Location: In Core Of eMMC Posts: 685 Member: 1950912 Status: Offline Sonork: 100.1654643(Offline) Thanks Meter: 403	MOTO X PLAY XT1562 OTA dead repair done MOTO X PLAY XT1562 OTA dead repair done Last edited by omi17; 10-29-2017 at 18:59. Reason: MOTO X PLAY XT1562 OTA dead repair done

11-01-2017, 06:42	#568 (permalink)
Deepesh Sharma No Life Poster Join Date: May 2010 Location: Incredible-India Posts: 6,018 Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297	samsung s7562 dead recover done Dead Recover

09-14-2017, 06:45	#557 (permalink)
mrsp Junior Member Join Date: Sep 2010 Location: Nepal Posts: 5 Member: 1389938 Status: Offline Thanks Meter: 1	HiPower mode is OFF Frequence: 14 Mhz CMD Pullup Level: 2155 mV CMD Active Level: 2454 mV Can't init device. Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD] error on g530h by easy jtag

10-17-2017, 08:01	#560 (permalink)
venkatesh420 Junior Member Join Date: Jul 2011 Posts: 14 Member: 1623444 Status: Offline Thanks Meter: 1	Easy jtag showing error at any time Can’t initiate device reason cmd timeout error Sent from my iPhone using Tapatalk

10-18-2017, 11:55	#561 (permalink)
nagesss Freak Poster Join Date: Dec 2014 Location: nepal,lalitpur Posts: 350 Member: 2306223 Status: Offline Sonork: 1660968:1234 Thanks Meter: 117	Cant write rom1 user area from the dump file in c 2305 sony.....writing boot 1 boot 2 sucess full... Any solution Sent from my Moto G (4) using Tapatalk

10-24-2017, 08:28	#562 (permalink)
ilyasrao No Life Poster Join Date: Aug 2011 Posts: 576 Member: 1630066 Status: Offline Sonork: 520074 Thanks Meter: 215	SC-04f DEAD BOOT RECOVERED HiPower mode is OFF Frequence: 21 Mhz CMD Pullup Level: 1742 mV CMD Active Level: 2279 mV EMMC Device Information : EMMC CID: 1101003033324745340422B3E13B91FE EMMC CSD: D05E00320F5903FFFFFFFFEF924000D2 EMMC Manufacture Name: TOSHIBA EMMC NAME: 032GE4 , S/N: 22B3E13B , rev. 04 EMMC NAME (HEX): 303332474534 EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000) EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Extended CSD Information : Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) Backup saved: 032GE4_22B3E13B_20171015_175947.extcsd EMMC Init completed. Scanning soft partitions GPT header is found and is valid Partition: apnhlos, [000000400000 - 000001300000], size: 000000F00000 Partition: modem, [000001300000 - 000004C70000], size: 000003970000 Partition: sbl1, [000004C70000 - 000004CF0000], size: 000000080000 Partition: dbi, [000004CF0000 - 000004D00000], size: 000000010000 Partition: ddr, [000004D00000 - 000004D08000], size: 000000008000 Partition: aboot, [000004D08000 - 000004F08000], size: 000000200000 Partition: rpm, [000004F08000 - 000004F88000], size: 000000080000 Partition: tz, [000004F88000 - 000005008000], size: 000000080000 Partition: fsg, [000005008000 - 000005308000], size: 000000300000 Partition: pad, [000005308000 - 000005A00000], size: 0000006F8000 Partition: param, [000005A00000 - 000006400000], size: 000000A00000 Partition: efs, [000006400000 - 000007200000], size: 000000E00000 Partition: modemst1, [000007200000 - 000007500000], size: 000000300000 Partition: modemst2, [000007500000 - 000007800000], size: 000000300000 Partition: boot, [000007800000 - 000008500000], size: 000000D00000 Partition: recovery, [000008500000 - 000009400000], size: 000000F00000 Partition: fota, [000009400000 - 00000A100000], size: 000000D00000 Partition: backup, [00000A100000 - 00000A7FDC00], size: 0000006FDC00 Partition: fsc, [00000A7FDC00 - 00000A7FE000], size: 000000000400 Partition: ssd, [00000A7FE000 - 00000A800000], size: 000000002000 Partition: persist, [00000A800000 - 00000B000000], size: 000000800000 Partition: persdata, [00000B000000 - 00000B900000], size: 000000900000 Partition: system, [00000B900000 - 0000AE100000], size: 0000A2800000 Partition: cache, [0000AE100000 - 0000BA900000], size: 00000C800000 Partition: hidden, [0000BA900000 - 0000BB300000], size: 000000A00000 Partition: userdata, [0000BB300000 - 000747BFBE00], size: 00068C8FBE00 GPT header successfully parsed Get firmware version Brand = samsung Model = SC-04F Phone platform = msm8974 CPU Abi = armeabi-v7a Android release = 6.0.1 DUMP LINK https://www.4shared.com/rar/eHyT2Xsd...1XPH3_v60.html PINOUTS ARE IN DUMP FILE

10-31-2017, 10:21	#567 (permalink)
venkatesh420 Junior Member Join Date: Jul 2011 Posts: 14 Member: 1623444 Status: Offline Thanks Meter: 1	Iam buy new easy jtag But it’s saying error at any time Can’t initiate device Reason cmd timeout error Plzzz help me How to solve this Sent from my iPhone using Tapatalk

11-11-2017, 11:54	#569 (permalink)
Deepesh Sharma No Life Poster Join Date: May 2010 Location: Incredible-India Posts: 6,018 Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297	Samsung s7582 dead recover s7582 dead recover with easy repair after set goes on download mode after flash with odin set working fine

11-12-2017, 11:29	#570 (permalink)
GsmKotla No Life Poster Join Date: Sep 2013 Location: Kotla Arab Ali Khan(PAK) Posts: 635 Member: 2016954 Status: Offline Thanks Meter: 345	Gt-sS562 Dead boot Repair done Connecting to Target... JTAG device: MSM7225A CPU IDCODE : 0x106230E1 Mfg.: 0x070, Part: 0x0623, Ver.: 0x1 CPU Manufacturer: QUALCOMM , CPU Name: MSM7227A Halting CPU... Initialize hardware... Starting target communication... Detecting emmc memory parameters of bank (0) ... EMMC #0 : ID : 0x01000015 Name : JJS00A Size : 3.6 G , (7634944) Blocks EMMC #1 : ID : 0x01000015 Name : JJS00A Size : 1.0 M , (2048) Blocks eMMC flash device(s) found, Device ID : 0x00150000 NAND Writing QCSBL... eMMC Write OK! Elapsed time: 3.527202s (72.579 KiB/s) NAND Writing MODEM... eMMC Write OK! Elapsed time: 318.841248s (64.233 KiB/s) NAND Writing PRT5... eMMC Write OK! Elapsed time: 33.171898s (118.338 KiB/s) NAND Writing OEMSBL... eMMC Write OK! Elapsed time: 12.156695s (78.969 KiB/s) NAND Writing APPSBL... eMMC Write OK! Elapsed time: 11.605664s (82.718 KiB/s) NAND Writing PIT... eMMC Write OK! Elapsed time: 4.358250s (117.478 KiB/s) NAND Writing MD5... eMMC Write OK! Elapsed time: 16.786961s (121.999 KiB/s) All Done.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode