Question ABout JKM-LX1 Dead Boot

[menaheero]

Hello ALl I Had A Dead Boot Y9 2019 JKM-LX1 C185,244
I Wrote A Dum Found On Easyfirmware With EasyJtag But Couldn't Write RPMB
And Log Show RPMB NOT CLEAN
Any Way Phone Back To Life And Got Fastboot Working But I Cann't Flash Stock
No Matter What Versions I Try Always Fail

So My Question Is RPMB Not Clean Would Lead To This Problem?

(Flashing ALways Stop At Product_Tybe)

[layder]

Originally Posted by menaheero

So My Question Is RPMB Not Clean Would Lead To This Problem?

(Flashing ALways Stop At Product_Tybe)

May be

But if you nt change eMMC, you dount need worry about RPMB content
For replace eMMC you need find new eMMC with Clean RPMB for some devices (Exynos and some else)

[menaheero]

Originally Posted by layder

May be

But if you nt change eMMC, you dount need worry about RPMB content
For replace eMMC you need find new eMMC with Clean RPMB for some devices (Exynos and some else)

Thanks Mr Layder For Useful Feed Back Much Appreciated

[Dr.Dekra]

Originally Posted by layder

May be

But if you nt change eMMC, you dount need worry about RPMB content
For replace eMMC you need find new eMMC with Clean RPMB for some devices (Exynos and some else)

no there is a bug when i try to read fw emmc dump ,,,, i lose all data and rpmb
now i have a fully dead honor 8x in my hand

[layder]

Originally Posted by Dr.Dekra

no there is a bug when i try to read fw emmc dump ,,,, i lose all data and rpmb
now i have a fully dead honor 8x in my hand

there is no need to read firmware from new eMMC 5.0 and 5.1

you made yourself a problem

[layder]

Originally Posted by Dr.Dekra

no there is a bug when i try to read fw emmc dump ,,,, i lose all data and rpmb
now i have a fully dead honor 8x in my hand

Please post eMMC name and log file with work with it (from log EasyJTAG folder (right mouse clicl at Log - select Open Log folder))

[Dr.Dekra]

Originally Posted by layder

Please post eMMC name and log file with work with it (from log EasyJTAG folder (right mouse clicl at Log - select Open Log folder))

Setting frequence to 21 Mhz
CMD Pullup Level: 2691 mV
CMD Active Level: 2805 mV
EMMC Device Information :
EMMC CID: 150100434B544134320226D74B879552
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTA42 , HEX: 434B54413432 , S/N: 26D74B87 , rev. 0x02
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x02 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTA42_26D74B87_20191110_132947.extcsd
EMMC Init completed.
Scanning soft partitions
GPT header is found and is valid
Partition: frp, [000000080000 - 000000100000], size: 000000080000 (512. KB)
Partition: persist, [000000100000 - 000000300000], size: 000000200000 (2.00 MB)
Partition: reserved1, [000000300000 - 000000800000], size: 000000500000 (5.00 MB)
Partition: reserved6, [000000800000 - 000000880000], size: 000000080000 (512. KB)
Partition: vrl, [000000880000 - 000000900000], size: 000000080000 (512. KB)
Partition: vrl_backup, [000000900000 - 000000980000], size: 000000080000 (512. KB)
Partition: modem_secure, [000000980000 - 000001200000], size: 000000880000 (8.50 MB)
Partition: nvme, [000001200000 - 000001700000], size: 000000500000 (5.00 MB)
Partition: certification, [000001700000 - 000001800000], size: 000000100000 (1.00 MB)
Partition: oeminfo, [000001800000 - 000005800000], size: 000004000000 (64.0 MB)
Partition: secure_storage, [000005800000 - 000007800000], size: 000002000000 (32.0 MB)
Partition: modem_om, [000007800000 - 000009800000], size: 000002000000 (32.0 MB)
Partition: modemnvm_factory, [000009800000 - 00000A800000], size: 000001000000 (16.0 MB)
Partition: modemnvm_backup, [00000A800000 - 00000B800000], size: 000001000000 (16.0 MB)
Partition: modemnvm_img, [00000B800000 - 00000DA00000], size: 000002200000 (34.0 MB)
Partition: reserved7, [00000DA00000 - 00000DC00000], size: 000000200000 (2.00 MB)
Partition: hisee_encos, [00000DC00000 - 00000E000000], size: 000000400000 (4.00 MB)
Partition: veritykey, [00000E000000 - 00000E100000], size: 000000100000 (1.00 MB)
Partition: ddr_para, [00000E100000 - 00000E200000], size: 000000100000 (1.00 MB)
Partition: modem_driver_a, [00000E200000 - 00000F600000], size: 000001400000 (20.0 MB)
Partition: reserved2, [00000F600000 - 00000FD00000], size: 000000700000 (7.00 MB)
Partition: splash2, [00000FD00000 - 000014D00000], size: 000005000000 (80.0 MB)
Partition: bootfail_info, [000014D00000 - 000014F00000], size: 000000200000 (2.00 MB)
Partition: misc, [000014F00000 - 000015100000], size: 000000200000 (2.00 MB)
Partition: dfx, [000015100000 - 000016100000], size: 000001000000 (16.0 MB)
Partition: rrecord, [000016100000 - 000017100000], size: 000001000000 (16.0 MB)
Partition: fw_lpm3_a, [000017100000 - 000017140000], size: 000000040000 (256. KB)
Partition: reserved3_a, [000017140000 - 000017500000], size: 0000003C0000 (3.75 MB)
Partition: hdcp_a, [000017500000 - 000017600000], size: 000000100000 (1.00 MB)
Partition: hisee_img_a, [000017600000 - 000017A00000], size: 000000400000 (4.00 MB)
Partition: hhee_a, [000017A00000 - 000017E00000], size: 000000400000 (4.00 MB)
Partition: hisee_fs_a, [000017E00000 - 000018600000], size: 000000800000 (8.00 MB)
Partition: fastboot_a, [000018600000 - 000019200000], size: 000000C00000 (12.0 MB)
Partition: vector_a, [000019200000 - 000019600000], size: 000000400000 (4.00 MB)
Partition: isp_boot_a, [000019600000 - 000019800000], size: 000000200000 (2.00 MB)
Partition: isp_firmware_a, [000019800000 - 00001A600000], size: 000000E00000 (14.0 MB)
Partition: fw_hifi_a, [00001A600000 - 00001B200000], size: 000000C00000 (12.0 MB)
Partition: teeos_a, [00001B200000 - 00001BA00000], size: 000000800000 (8.00 MB)
Partition: sensorhub_a, [00001BA00000 - 00001CA00000], size: 000001000000 (16.0 MB)
Partition: erecovery_kernel_a, [00001CA00000 - 00001E200000], size: 000001800000 (24.0 MB)
Partition: erecovery_ramdisk_a, [00001E200000 - 000020200000], size: 000002000000 (32.0 MB)
Partition: erecovery_vendor_a, [000020200000 - 000021200000], size: 000001000000 (16.0 MB)
Partition: kernel_a, [000021200000 - 000022A00000], size: 000001800000 (24.0 MB)
Partition: eng_system_a, [000022A00000 - 000023600000], size: 000000C00000 (12.0 MB)
Partition: recovery_ramdisk_a, [000023600000 - 000025600000], size: 000002000000 (32.0 MB)
Partition: recovery_vendor_a, [000025600000 - 000026600000], size: 000001000000 (16.0 MB)
Partition: dts_a, [000026600000 - 000026E00000], size: 000000800000 (8.00 MB)
Partition: dto_a, [000026E00000 - 000028600000], size: 000001800000 (24.0 MB)
Partition: trustfirmware_a, [000028600000 - 000028800000], size: 000000200000 (2.00 MB)
Partition: modem_fw_a, [000028800000 - 00002C000000], size: 000003800000 (56.0 MB)
Partition: eng_vendor_a, [00002C000000 - 00002CC00000], size: 000000C00000 (12.0 MB)
Partition: modem_patch_nv_a, [00002CC00000 - 00002D000000], size: 000000400000 (4.00 MB)
Partition: preload_a, [00002D000000 - 00002D800000], size: 000000800000 (8.00 MB)
Partition: recovery_vbmeta_a, [00002D800000 - 00002DA00000], size: 000000200000 (2.00 MB)
Partition: erecovery_vbmeta_a, [00002DA00000 - 00002DC00000], size: 000000200000 (2.00 MB)
Partition: vbmeta_a, [00002DC00000 - 00002E000000], size: 000000400000 (4.00 MB)
Partition: modemnvm_update_a, [00002E000000 - 00002F000000], size: 000001000000 (16.0 MB)
Partition: modemnvm_cust_a, [00002F000000 - 000030000000], size: 000001000000 (16.0 MB)
Partition: reserved8, [000030000000 - 000032000000], size: 000002000000 (32.0 MB)
Partition: version_a, [000032000000 - 000034000000], size: 000002000000 (32.0 MB)
Partition: vendor_a, [000034000000 - 000063800000], size: 00002F800000 (760. MB)
Partition: product_a, [000063800000 - 000091800000], size: 00002E000000 (736. MB)
Partition: cust_a, [000091800000 - 00009D800000], size: 00000C000000 (192. MB)
Partition: odm_a, [00009D800000 - 0000A8800000], size: 00000B000000 (176. MB)
Partition: cache, [0000A8800000 - 0000AF000000], size: 000006800000 (104. MB)
Partition: system_a, [0000AF000000 - 000121000000], size: 000072000000 (1.78 GB)
Partition: preas, [000121000000 - 00015B800000], size: 00003A800000 (936. MB)
Partition: preavs, [00015B800000 - 00015D800000], size: 000002000000 (32.0 MB)
Partition: patch_a, [00015D800000 - 00016A000000], size: 00000C800000 (200. MB)
Partition: userdata, [00016A000000 - 000E8F800000], size: 000D25800000 (52.5 GB)
GPT header successfully parsed

EMMC SAMSUNG KLMCG2KCTA-B041 64GB 5.1

AFTER WRITE DUMP

---------- eMMC Device Information ----------


eMMC CID : 150100434B544134320226D74B879552

eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C

eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 09/2018  Rev.0x2
eMMC NAME: CKTA42 , S/N:  651643783
eMMC NAME (HEX): 434B54413432 
EMMC ROM1 (Main User Data)   Capacity: 59640 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 6515 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)

Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits  , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x01

High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

 Device support partitioning feature

 Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

---------------------------------------------

Backup saved: CKTA42_ 651643783_20191111_0014.extcsd
Partition info successfully found
Found Data areas (firmware parts) count is: 67 
---------------------------------------------

P0 (FRP) [0x80000 0x80000] Size: 512.0KB
P1 (PERSIST) [0x100000 0x200000] Size: 2.0MB
P2 (RESERVED1) [0x300000 0x500000] Size: 5.0MB
P3 (RESERVED6) [0x800000 0x80000] Size: 512.0KB
P4 (VRL) [0x880000 0x80000] Size: 512.0KB
P5 (VRL_BACKUP) [0x900000 0x80000] Size: 512.0KB
P6 (MODEM_SECURE) [0x980000 0x880000] Size: 8.500MB
P7 (NVME) [0x1200000 0x500000] Size: 5.0MB
P8 (CERTIFICATION) [0x1700000 0x100000] Size: 1.0MB
P9 (OEMINFO) [0x1800000 0x4000000] Size: 64.0MB
P10 (SECURE_STORAGE) [0x5800000 0x2000000] Size: 32.0MB
P11 (MODEM_OM) [0x7800000 0x2000000] Size: 32.0MB
P12 (MODEMNVM_FACTORY) [0x9800000 0x1000000] Size: 16.0MB
P13 (MODEMNVM_BACKUP) [0xa800000 0x1000000] Size: 16.0MB
P14 (MODEMNVM_IMG) [0xb800000 0x2200000] Size: 34.0MB
P15 (RESERVED7) [0xda00000 0x200000] Size: 2.0MB
P16 (HISEE_ENCOS) [0xdc00000 0x400000] Size: 4.0MB
P17 (VERITYKEY) [0xe000000 0x100000] Size: 1.0MB
P18 (DDR_PARA) [0xe100000 0x100000] Size: 1.0MB
P19 (RESERVED2) [0xe200000 0x1b00000] Size: 27.0MB
P20 (SPLASH2) [0xfd00000 0x5000000] Size: 80.0MB
P21 (BOOTFAIL_INFO) [0x14d00000 0x200000] Size: 2.0MB
P22 (MISC) [0x14f00000 0x200000] Size: 2.0MB
P23 (DFX) [0x15100000 0x1000000] Size: 16.0MB
P24 (RRECORD) [0x16100000 0x1000000] Size: 16.0MB
P25 (FW_LPM3_A) [0x17100000 0x40000] Size: 256.0KB
P26 (RESERVED3_A) [0x17140000 0x3c0000] Size: 3.750MB
P27 (HDCP_A) [0x17500000 0x100000] Size: 1.0MB
P28 (HISEE_IMG_A) [0x17600000 0x400000] Size: 4.0MB
P29 (HHEE_A) [0x17a00000 0x400000] Size: 4.0MB
P30 (HISEE_FS_A) [0x17e00000 0x800000] Size: 8.0MB
P31 (FASTBOOT_A) [0x18600000 0xc00000] Size: 12.0MB
P32 (VECTOR_A) [0x19200000 0x400000] Size: 4.0MB
P33 (ISP_BOOT_A) [0x19600000 0x200000] Size: 2.0MB
P34 (ISP_FIRMWARE_A) [0x19800000 0xe00000] Size: 14.0MB
P35 (FW_HIFI_A) [0x1a600000 0xc00000] Size: 12.0MB
P36 (TEEOS_A) [0x1b200000 0x800000] Size: 8.0MB
P37 (SENSORHUB_A) [0x1ba00000 0x1000000] Size: 16.0MB
P38 (ERECOVERY_KERNEL_A) [0x1ca00000 0x1800000] Size: 24.0MB
P39 (ERECOVERY_RAMDISK_A) [0x1e200000 0x2000000] Size: 32.0MB
P40 (ERECOVERY_VENDOR_A) [0x20200000 0x1000000] Size: 16.0MB
P41 (KERNEL_A) [0x21200000 0x1800000] Size: 24.0MB
P42 (RAMDISK_A) [0x22a00000 0x1000000] Size: 16.0MB
P43 (RECOVERY_RAMDISK_A) [0x23a00000 0x2000000] Size: 32.0MB
P44 (RECOVERY_VENDOR_A) [0x25a00000 0x1000000] Size: 16.0MB
P45 (DTS_A) [0x26a00000 0x1800000] Size: 24.0MB
P46 (DTO_A) [0x28200000 0x800000] Size: 8.0MB
P47 (TRUSTFIRMWARE_A) [0x28a00000 0x200000] Size: 2.0MB
P48 (MODEM_FW_A) [0x28c00000 0x3800000] Size: 56.0MB
P49 (RESERVED4_A) [0x2c400000 0x1400000] Size: 20.0MB
P50 (RECOVERY_VBMETA_A) [0x2d800000 0x200000] Size: 2.0MB
P51 (ERECOVERY_VBMETA_A) [0x2da00000 0x200000] Size: 2.0MB
P52 (VBMETA_A) [0x2dc00000 0x400000] Size: 4.0MB
P53 (MODEMNVM_UPDATE_A) [0x2e000000 0x1000000] Size: 16.0MB
P54 (MODEMNVM_CUST_A) [0x2f000000 0x1000000] Size: 16.0MB
P55 (PATCH_A) [0x30000000 0x2000000] Size: 32.0MB
P56 (VERSION_A) [0x32000000 0x2000000] Size: 32.0MB
P57 (VENDOR_A) [0x34000000 0x2f800000] Size: 760.0MB
P58 (PRODUCT_A) [0x63800000 0xc000000] Size: 192.0MB
P59 (CUST_A) [0x6f800000 0xc000000] Size: 192.0MB
P60 (ODM_A) [0x7b800000 0xb000000] Size: 176.0MB
P61 (CACHE) [0x86800000 0x6800000] Size: 104.0MB
P62 (SYSTEM_A) [0x8d000000 0x137c00000] Size: 4.871GB
P63 (RESERVED5) [0x1c4c00000 0x8000000] Size: 128.0MB
P64 (HIBENCH_DATA) [0x1ccc00000 0x20000000] Size: 512.0MB
P65 (FLASH_AGEING) [0x1ecc00000 0x20000000] Size: 512.0MB
P66 (USERDATA) [0x20cc00000 0x100000000] Size: 4.0GB
Detected USERDATA USERDATA : 0x020CC00000 (4.0GB)
Unable to read gesture.key , code 2
Done.

I THINK THAT PROBLEM IN RPMB MUST BE COMPATIBLE WITH ROM1 *MAIN USER DATA' ,,,,
I USE Image_Download_Tool_v2.0.0.9 ; BEFOR CLEAN EMMC

20191103-00:43:19 usb1:Start downloading with VCom!
20191103-00:43:19 usb1:Load DownLoadBoot Version 2.0.0.9
20191103-00:43:19 usb1:Opening COM68 Success
20191103-00:43:19 usb1:download mode enter:31
20191103-00:43:19 usb1ownloading xloader begin.
20191103-00:43:20 usb1:Writing xloader...
20191103-00:43:20 usb1:Write delay = 3000 ms.
20191103-00:43:23 usb1ownload xloader end.
20191103-00:43:23 usb1:download mode enter:0
20191103-00:43:23 usb1ownloading uce begin.
20191103-00:43:24 usb1:Writing uce...
20191103-00:43:24 usb1:Write delay = 3000 ms.
20191103-00:43:27 usb1ownload uce end.
20191103-00:43:27 usb1:download mode enter:0
20191103-00:43:27 usb1ownloading fastboot begin.
20191103-00:43:42 usb1:Writing fastboot...
20191103-00:43:42 usb1:Write delay = 3000 ms.
20191103-00:43:45 usb1ownload fastboot end.
20191103-00:43:45 usb1:VCom download successfully.
20191103-00:44:20 STOP (61 s)

AFTER CLEAN EMMC AND WRITE BOOT2 AND 128MB DUMP OR DUMP FROM FACTORY FIRMWARE

20191112-23:39:12  usb1:Start downloading with VCom!
20191112-23:39:12  usb1:Load DownLoadBoot Version 2.0.0.9
20191112-23:39:12  usb1:Opening COM68 Success
20191112-23:39:12  usb1:download mode enter:31
20191112-23:39:12  usb1:Downloading xloader begin.
20191112-23:39:13  usb1:Writing xloader...
20191112-23:39:13  usb1:Write delay = 3000 ms.
20191112-23:39:16  usb1:Download xloader end.
20191112-23:39:16  usb1:download mode enter:0
20191112-23:39:16  usb1:Downloading uce begin.
20191112-23:39:17  usb1:Writing uce...
20191112-23:39:17  usb1:Write delay = 3000 ms.
20191112-23:39:20  usb1:Download uce end.
20191112-23:39:23  usb1:Downloading fastboot : send status frame fail.
20191112-23:39:23  usb1:[DETAIL_ERROR_CODE] :4
20191112-23:39:23  usb1:Downloading fastboot begin.
20191112-23:39:24  usb1:SendFrameRcvAck: Send Fail.
20191112-23:39:26  usb1:SendFrameRcvAck: Send Fail.
20191112-23:39:30  usb1:SendFrameRcvAck: Send Fail.
20191112-23:39:33  usb1:Downloading fastboot : send file frame fail.
20191112-23:39:33  usb1:[DETAIL_ERROR_CODE] :4
20191112-23:39:33  usb1:Midway download fail
20191112-23:39:33  FAIL (20 s). Error (4)

THIS IS PINOUT OF HONOR 8X
mediafire.com/view/jfhq0tnu371mkpf/HONOR8XEMMC_PINOUTOK.jpg/file

[layder]

Originally Posted by Dr.Dekra

no there is a bug when i try to read fw emmc dump ,,,, i lose all data and rpmb

post log,

"when i try to read fw emmc dump"

[Dr.Dekra]

Originally Posted by layder

post log,

"when i try to read fw emmc dump"

selected emmc interface
running:samsung: Emmc firmware dump...
Init ok...
Firmware file...e:\honor8x\emmc_firmware_unknown.bin

running:samsung: Movinand firmware extraction...
Z3x easyjtag software ver. 3.6.1.4
skip loading emmc addon firmware
cmd pullup level:2052 mv
cmd active level:2392 mv
box io level:2800 mv
clk rate:7000 khz
--- easyjtag samsung emmc backup tool ---
emmc cid : 150100434b544134320226d74b879552
emmc csd : D02701320f5903fff6dbffef8e40400c
emmc manufacturer id: 0015 , oem id: 0100
emmc date: 09/2018 rev.0x2
emmc name: Ckta42 , s/n: 651643783
emmc part number: Unknown
emmc rom1 (main user data) capacity: 59632 mb
emmc rom2 (boot partition 1/2) capacity: 4096 kb
emmc rpmb (replay protected memory block) capacity: 16384 kb
reading emmc boot identification data...
Emmc fw read failed, reason: Cmd timeout error
done.

Done with error(s)

message please power cycle emmc chip,,,