Repair boot on Samsung g532g. please read

[eumore79]

i got this phone samsung j2 prime g532g openline but after flash it goes dead boot
so i use easy jtag to revive the unit
after i write PIT-SM-G532G-15-03-2017_09-07-10.pit with 4files firmware without system check still dead

now after search other pit file when try to read emmc again i got this

eMMC_tool Suite ver. 1.4.8.0
Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)

Looking for EasyJTAG box...
EasyJTAG API ver. 2008
Setting IO Levels to 1.8V
Setting frequence to 14 Mhz
HiPower mode is OFF
EasyJTAG Box Serial = 0300F00C83528FA7
Card Serial = AA12-8E22
EasyJTAG Box Firmware = 01.60

Changelog:

08.08.2017 (ver 1.4.8.0)
Fix: Bugs that have been found through your crash report
Fix: Saving VCF for contacts
Add: Multiple file selection for Samsung firmware
Add: Write full Extcsd or write only the boot configuration ("Repair Extcsd" button)
Add: Intel vendor (for easy read/write ROM2/ROM3/GP1)
Add: "Pinouts" tab (taken from the catalog of classic software)
Add: Checker for Sony TrimArea
Add: Speed graph for "Random verify emmc"
Add: Fat16/Fat32/exFat support (Explorer)

HiPower mode is OFF
Frequence: 14 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 1753 mV
EMMC Device Information :
EMMC CID: 65646F4D204D4F5212A100000240012E
EMMC CSD: D07FFF320F59007FF6DB80001E40001C
EMMC Manufacture Name:
EMMC Manufacture ID: 0x65 , OEM ID: 646F
EMMC Manufacture Date: 0/2014 , Rev: A1
EMMC NAME: M MOR , S/N: 00000240 , rev. A1
EMMC NAME (HEX): 4D204D4F5212
EMMC ROM 1 (Main User Data) Capacity: 128 MB (000008000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x78 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: M MOR_00000240_20171104_184009.extcsd
EMMC Init completed.

Warning: Maybe your emmc damaged

Get firmware version
Firmware info not found

i badly needed help on this

[eumore79]

this is another log before

11/4/2017 3:58:24 PM> eMMC_tool Suite ver. 1.4.8.0
11/4/2017 3:58:24 PM> Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)
11/4/2017 3:58:24 PM>
11/4/2017 3:58:24 PM> Looking for EasyJTAG box...
11/4/2017 3:58:24 PM> EasyJTAG API ver. 2008
11/4/2017 3:58:24 PM> Setting IO Levels to 1.8V
11/4/2017 3:58:24 PM> Setting frequence to 14 Mhz
11/4/2017 3:58:24 PM> HiPower mode is OFF
11/4/2017 3:58:25 PM> OpenUSB returned = 0
11/4/2017 3:58:25 PM> Power Controller returned = 0
11/4/2017 3:58:27 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 3:58:33 PM> Card Serial = AA12-8E22
11/4/2017 3:58:33 PM> CardAttr = 3B7F96000080318065B0850201F312FFFE829000
11/4/2017 3:58:33 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 3:58:33 PM>
11/4/2017 3:58:36 PM> Looking for EasyJTAG box...
11/4/2017 3:58:36 PM> EasyJTAG API ver. 2008
11/4/2017 3:58:36 PM> Setting IO Levels to 1.8V
11/4/2017 3:58:36 PM> Setting frequence to 14 Mhz
11/4/2017 3:58:36 PM> HiPower mode is OFF
11/4/2017 3:58:37 PM> OpenUSB returned = 0
11/4/2017 3:58:37 PM> Power Controller returned = 0
11/4/2017 3:58:38 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 3:58:38 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 3:58:38 PM> HiPower mode is OFF
11/4/2017 3:58:39 PM> Frequence: 14 Mhz
11/4/2017 3:58:39 PM> CMD Pullup Level: 1711 mV
11/4/2017 3:58:39 PM> CMD Active Level: 1773 mV
11/4/2017 3:58:39 PM> eMMC Init returned = 0
11/4/2017 3:58:39 PM> EMMC Device Information :
11/4/2017 3:58:39 PM> EMMC CID: 90014A483847347592010DC949235464
11/4/2017 3:58:39 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
11/4/2017 3:58:39 PM> EMMC Manufacture Name: SKHYNIX
11/4/2017 3:58:39 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A
11/4/2017 3:58:39 PM> EMMC Manufacture Date: 5/2017 , Rev: 01
11/4/2017 3:58:39 PM> EMMC NAME: H8G4u , S/N: 0DC94923 , rev. 01
11/4/2017 3:58:39 PM> EMMC NAME (HEX): 483847347592
11/4/2017 3:58:39 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
11/4/2017 3:58:39 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/4/2017 3:58:39 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/4/2017 3:58:39 PM> EMMC Permanent Write Protection: No
11/4/2017 3:58:39 PM> EMMC Temporary Write Protection: No
11/4/2017 3:58:39 PM> Extended CSD Information :
11/4/2017 3:58:39 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/4/2017 3:58:39 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/4/2017 3:58:39 PM> Boot Bus Config: 0x00 , width 1bit
11/4/2017 3:58:39 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
11/4/2017 3:58:39 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/4/2017 3:58:39 PM> Device supports partitioning features
11/4/2017 3:58:39 PM> Device can have enhanced technological features in partitions and user data area
11/4/2017 3:58:39 PM> Device can have extended partitions attribute
11/4/2017 3:58:39 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/4/2017 3:58:39 PM> Backup saved: H8G4u_0DC94923_20171104_155839.extcsd
11/4/2017 3:58:39 PM> EMMC Init completed.
11/4/2017 3:58:39 PM>
11/4/2017 3:58:39 PM> Get firmware version
11/4/2017 3:58:39 PM>
11/4/2017 3:58:40 PM> Brand = samsung
11/4/2017 3:58:40 PM> Model = SM-G532G
11/4/2017 3:58:40 PM> Phone platform = mt6737t
11/4/2017 3:58:40 PM> CPU Abi = armeabi-v7a
11/4/2017 3:58:40 PM> Mediatek platform = MT6737T
11/4/2017 3:58:40 PM> Android release = 6.0.1
11/4/2017 3:58:40 PM> Firmware version = MMB29T.G532GDXU1APL1
11/4/2017 3:58:40 PM> Firmware date = Wed Dec 7 21:30:09 KST 2016
11/4/2017 4:01:11 PM>
11/4/2017 4:01:11 PM> Nothing to read. Process stopped.
11/4/2017 4:01:11 PM>
11/4/2017 4:01:18 PM> Looking for EasyJTAG box...
11/4/2017 4:01:18 PM> EasyJTAG API ver. 2008
11/4/2017 4:01:18 PM> Setting IO Levels to 1.8V
11/4/2017 4:01:18 PM> Setting frequence to 14 Mhz
11/4/2017 4:01:18 PM> HiPower mode is OFF
11/4/2017 4:01:19 PM> OpenUSB returned = 0
11/4/2017 4:01:19 PM> Power Controller returned = 0
11/4/2017 4:01:20 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:01:20 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:01:20 PM> HiPower mode is OFF
11/4/2017 4:01:21 PM> Frequence: 14 Mhz
11/4/2017 4:01:21 PM> CMD Pullup Level: 1701 mV
11/4/2017 4:01:21 PM> CMD Active Level: 1763 mV
11/4/2017 4:01:21 PM> eMMC Init returned = 0
11/4/2017 4:01:21 PM> EMMC Device Information :
11/4/2017 4:01:21 PM> EMMC CID: 90014A483847347592010DC949235464
11/4/2017 4:01:21 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
11/4/2017 4:01:21 PM> EMMC Manufacture Name: SKHYNIX
11/4/2017 4:01:21 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A
11/4/2017 4:01:21 PM> EMMC Manufacture Date: 5/2017 , Rev: 01
11/4/2017 4:01:21 PM> EMMC NAME: H8G4u , S/N: 0DC94923 , rev. 01
11/4/2017 4:01:21 PM> EMMC NAME (HEX): 483847347592
11/4/2017 4:01:21 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
11/4/2017 4:01:21 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/4/2017 4:01:21 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/4/2017 4:01:21 PM> EMMC Permanent Write Protection: No
11/4/2017 4:01:21 PM> EMMC Temporary Write Protection: No
11/4/2017 4:01:21 PM> Extended CSD Information :
11/4/2017 4:01:21 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/4/2017 4:01:21 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/4/2017 4:01:21 PM> Boot Bus Config: 0x00 , width 1bit
11/4/2017 4:01:21 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
11/4/2017 4:01:21 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/4/2017 4:01:21 PM> Device supports partitioning features
11/4/2017 4:01:21 PM> Device can have enhanced technological features in partitions and user data area
11/4/2017 4:01:21 PM> Device can have extended partitions attribute
11/4/2017 4:01:21 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/4/2017 4:01:21 PM> Backup saved: H8G4u_0DC94923_20171104_160121.extcsd
11/4/2017 4:01:21 PM> EMMC Init completed.
11/4/2017 4:01:21 PM>
11/4/2017 4:01:21 PM> Operation: Find table from emmc
11/4/2017 4:01:21 PM>
11/4/2017 4:01:21 PM> Vendor: Samsung
11/4/2017 4:01:21 PM> Searching GPT ...
11/4/2017 4:01:21 PM> GPT header is found and is valid
11/4/2017 4:01:21 PM> Checking for ROM2 ...
11/4/2017 4:01:21 PM> ROM2 is not blank
11/4/2017 4:01:21 PM> GPT header successfully parsed
11/4/2017 4:01:21 PM>
11/4/2017 4:01:39 PM> Looking for EasyJTAG box...
11/4/2017 4:01:39 PM> EasyJTAG API ver. 2008
11/4/2017 4:01:39 PM> Setting IO Levels to 1.8V
11/4/2017 4:01:39 PM> Setting frequence to 14 Mhz
11/4/2017 4:01:39 PM> HiPower mode is OFF
11/4/2017 4:01:40 PM> OpenUSB returned = 0
11/4/2017 4:01:40 PM> Power Controller returned = 0
11/4/2017 4:01:41 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:01:41 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:01:41 PM> HiPower mode is OFF
11/4/2017 4:01:41 PM> Frequence: 14 Mhz
11/4/2017 4:01:41 PM> CMD Pullup Level: 1691 mV
11/4/2017 4:01:41 PM> CMD Active Level: 1753 mV
11/4/2017 4:01:41 PM> eMMC Init returned = 0
11/4/2017 4:01:41 PM> EMMC Device Information :
11/4/2017 4:01:41 PM> EMMC CID: 90014A483847347592010DC949235464
11/4/2017 4:01:41 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
11/4/2017 4:01:41 PM> EMMC Manufacture Name: SKHYNIX
11/4/2017 4:01:41 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A
11/4/2017 4:01:41 PM> EMMC Manufacture Date: 5/2017 , Rev: 01
11/4/2017 4:01:41 PM> EMMC NAME: H8G4u , S/N: 0DC94923 , rev. 01
11/4/2017 4:01:41 PM> EMMC NAME (HEX): 483847347592
11/4/2017 4:01:41 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
11/4/2017 4:01:41 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/4/2017 4:01:41 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/4/2017 4:01:41 PM> EMMC Permanent Write Protection: No
11/4/2017 4:01:41 PM> EMMC Temporary Write Protection: No
11/4/2017 4:01:41 PM> Extended CSD Information :
11/4/2017 4:01:41 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/4/2017 4:01:41 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/4/2017 4:01:41 PM> Boot Bus Config: 0x00 , width 1bit
11/4/2017 4:01:41 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
11/4/2017 4:01:41 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/4/2017 4:01:41 PM> Device supports partitioning features
11/4/2017 4:01:41 PM> Device can have enhanced technological features in partitions and user data area
11/4/2017 4:01:41 PM> Device can have extended partitions attribute
11/4/2017 4:01:41 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/4/2017 4:01:41 PM> Backup saved: H8G4u_0DC94923_20171104_160141.extcsd
11/4/2017 4:01:41 PM> EMMC Init completed.
11/4/2017 4:01:41 PM>
11/4/2017 4:01:42 PM> Pit-file created successfully
11/4/2017 4:01:42 PM>
11/4/2017 4:01:42 PM> Backup partition: PrimaryGPT
11/4/2017 4:01:42 PM> Address: 000000000000, size: 000000004400
11/4/2017 4:01:42 PM> GPTHeader is valid
11/4/2017 4:01:42 PM>
11/4/2017 4:01:42 PM> Partition name: bootloader_rom2
11/4/2017 4:01:42 PM> Address: 000000000000, size: 000000400000
11/4/2017 4:01:42 PM> eMMC switching to ROM2
11/4/2017 4:01:42 PM> Reading partition...
11/4/2017 4:01:46 PM> Done reading partition. Read speed: 1295.71 Kb/s
11/4/2017 4:01:46 PM> Partition name: BOTA0
11/4/2017 4:01:46 PM> Address: 000000400000, size: 000000400000
11/4/2017 4:01:46 PM> eMMC switching to ROM1
11/4/2017 4:01:46 PM> Reading partition...
11/4/2017 4:01:48 PM> Done reading partition. Read speed: 1651.42 Kb/s
11/4/2017 4:01:48 PM> Partition name: nvram
11/4/2017 4:01:48 PM> Address: 000000800000, size: 000000800000
11/4/2017 4:01:48 PM> eMMC switching to ROM1
11/4/2017 4:01:49 PM> Reading partition...
11/4/2017 4:01:54 PM> Done reading partition. Read speed: 1616.77 Kb/s
11/4/2017 4:01:54 PM> Partition name: lk
11/4/2017 4:01:54 PM> Address: 000001000000, size: 000000200000
11/4/2017 4:01:54 PM> eMMC switching to ROM1
11/4/2017 4:01:54 PM> Reading partition...
11/4/2017 4:01:56 PM> Done reading partition. Read speed: 1307.49 Kb/s
11/4/2017 4:01:56 PM> Partition name: BOTA1
11/4/2017 4:01:56 PM> Address: 000001200000, size: 000000200000
11/4/2017 4:01:56 PM> eMMC switching to ROM1
11/4/2017 4:01:56 PM> Reading partition...
11/4/2017 4:01:57 PM> Done reading partition. Read speed: 1651.74 Kb/s
11/4/2017 4:01:57 PM> Partition name: secro
11/4/2017 4:01:57 PM> Address: 000001400000, size: 000000700000
11/4/2017 4:01:57 PM> eMMC switching to ROM1
11/4/2017 4:01:57 PM> Reading partition...
11/4/2017 4:02:02 PM> Done reading partition. Read speed: 1651.16 Kb/s
11/4/2017 4:02:02 PM> Partition name: seccfg
11/4/2017 4:02:02 PM> Address: 000001B00000, size: 000000080000
11/4/2017 4:02:02 PM> eMMC switching to ROM1
11/4/2017 4:02:02 PM> Reading partition...
11/4/2017 4:02:02 PM> Done reading partition. Read speed: 1651.24 Kb/s
11/4/2017 4:02:02 PM> Partition name: efuse
11/4/2017 4:02:02 PM> Address: 000001B80000, size: 000000080000
11/4/2017 4:02:02 PM> eMMC switching to ROM1
11/4/2017 4:02:02 PM> Reading partition...
11/4/2017 4:02:03 PM> Done reading partition. Read speed: 1529.84 Kb/s
11/4/2017 4:02:03 PM> Partition name: tee1
11/4/2017 4:02:03 PM> Address: 000001C00000, size: 000000600000
11/4/2017 4:02:03 PM> eMMC switching to ROM1
11/4/2017 4:02:03 PM> Reading partition...
11/4/2017 4:02:07 PM> Done reading partition. Read speed: 1542.56 Kb/s
11/4/2017 4:02:07 PM> Partition name: BOTA2
11/4/2017 4:02:07 PM> Address: 000002200000, size: 000000600000
11/4/2017 4:02:07 PM> eMMC switching to ROM1
11/4/2017 4:02:07 PM> Reading partition...
11/4/2017 4:02:11 PM> Done reading partition. Read speed: 1645.55 Kb/s
11/4/2017 4:02:11 PM> Partition name: EFS
11/4/2017 4:02:11 PM> Address: 000002800000, size: 000000800000
11/4/2017 4:02:11 PM> eMMC switching to ROM1
11/4/2017 4:02:11 PM> Reading partition...
11/4/2017 4:02:16 PM> Done reading partition. Read speed: 1567.61 Kb/s
11/4/2017 4:02:16 PM> Partition name: nvdata
11/4/2017 4:02:16 PM> Address: 000003000000, size: 000002000000
11/4/2017 4:02:16 PM> eMMC switching to ROM1
11/4/2017 4:02:17 PM> Reading partition...
11/4/2017 4:02:37 PM> Done reading partition. Read speed: 1596.82 Kb/s
11/4/2017 4:02:37 PM> Partition name: PARAM
11/4/2017 4:02:37 PM> Address: 000005000000, size: 000000800000
11/4/2017 4:02:37 PM> eMMC switching to ROM1
11/4/2017 4:02:37 PM> Reading partition...
11/4/2017 4:02:43 PM> Done reading partition. Read speed: 1519.88 Kb/s
11/4/2017 4:02:43 PM> Partition name: recovery
11/4/2017 4:02:43 PM> Address: 000005800000, size: 000001000000
11/4/2017 4:02:43 PM> eMMC switching to ROM1
11/4/2017 4:02:43 PM> Reading partition...
11/4/2017 4:02:59 PM> Done reading partition. Read speed: 987.06 Kb/s
11/4/2017 4:03:00 PM> Partition name: boot
11/4/2017 4:03:00 PM> Address: 000006800000, size: 000001000000
11/4/2017 4:03:00 PM> eMMC switching to ROM1
11/4/2017 4:03:00 PM> Reading partition...
11/4/2017 4:03:15 PM> Done reading partition. Read speed: 1044.85 Kb/s
11/4/2017 4:03:15 PM> Partition name: md1img
11/4/2017 4:03:15 PM> Address: 000007800000, size: 000002000000
11/4/2017 4:03:15 PM> eMMC switching to ROM1
11/4/2017 4:03:16 PM> Reading partition...
11/4/2017 4:03:41 PM> Done reading partition. Read speed: 1267.62 Kb/s
11/4/2017 4:03:41 PM> Partition name: md1dsp
11/4/2017 4:03:41 PM> Address: 000009800000, size: 000000400000
11/4/2017 4:03:41 PM> eMMC switching to ROM1
11/4/2017 4:03:42 PM> Reading partition...
11/4/2017 4:03:45 PM> Done reading partition. Read speed: 1230.86 Kb/s
11/4/2017 4:03:45 PM> Partition name: keystore
11/4/2017 4:03:45 PM> Address: 000009C00000, size: 000000800000
11/4/2017 4:03:45 PM> eMMC switching to ROM1
11/4/2017 4:03:45 PM> Reading partition...
11/4/2017 4:03:50 PM> Done reading partition. Read speed: 1646.16 Kb/s
11/4/2017 4:03:50 PM> Partition name: omekeystore
11/4/2017 4:03:50 PM> Address: 00000A400000, size: 000000380000
11/4/2017 4:03:50 PM> eMMC switching to ROM1
11/4/2017 4:03:51 PM> Reading partition...
11/4/2017 4:03:53 PM> Done reading partition. Read speed: 1650.33 Kb/s
11/4/2017 4:03:53 PM> Partition name: proinfo
11/4/2017 4:03:53 PM> Address: 00000A780000, size: 000000280000
11/4/2017 4:03:53 PM> eMMC switching to ROM1
11/4/2017 4:03:53 PM> Reading partition...
11/4/2017 4:03:54 PM> Done reading partition. Read speed: 1651.82 Kb/s
11/4/2017 4:03:55 PM> Partition name: para
11/4/2017 4:03:55 PM> Address: 00000AA00000, size: 000000080000
11/4/2017 4:03:55 PM> eMMC switching to ROM1
11/4/2017 4:03:55 PM> Reading partition...
11/4/2017 4:03:55 PM> Done reading partition. Read speed: 1651.42 Kb/s
11/4/2017 4:03:55 PM> Partition name: PERSISTENT
11/4/2017 4:03:55 PM> Address: 00000AA80000, size: 000000080000
11/4/2017 4:03:55 PM> eMMC switching to ROM1
11/4/2017 4:03:55 PM> Reading partition...
11/4/2017 4:03:56 PM> Done reading partition. Read speed: 1648.28 Kb/s
11/4/2017 4:03:56 PM> Partition name: STEADY
11/4/2017 4:03:56 PM> Address: 00000AB00000, size: 000000100000
11/4/2017 4:03:56 PM> eMMC switching to ROM1
11/4/2017 4:03:56 PM> Reading partition...
11/4/2017 4:03:56 PM> Done reading partition. Read speed: 1653.72 Kb/s
11/4/2017 4:03:56 PM> Partition name: protect1
11/4/2017 4:03:57 PM> Address: 00000AC00000, size: 000000800000
11/4/2017 4:03:57 PM> eMMC switching to ROM1
11/4/2017 4:03:57 PM> Reading partition...
11/4/2017 4:04:02 PM> Done reading partition. Read speed: 1643.26 Kb/s
11/4/2017 4:04:02 PM> Partition name: protect2
11/4/2017 4:04:02 PM> Address: 00000B400000, size: 000000800000
11/4/2017 4:04:02 PM> eMMC switching to ROM1
11/4/2017 4:04:02 PM> Reading partition...
11/4/2017 4:04:11 PM> Done reading partition. Read speed: 885.86 Kb/s
11/4/2017 4:04:11 PM> Partition name: RESERVE2
11/4/2017 4:04:11 PM> Address: 00000BC00000, size: 000000400000
11/4/2017 4:04:11 PM> eMMC switching to ROM1
11/4/2017 4:04:11 PM> Reading partition...
11/4/2017 4:04:14 PM> Done reading partition. Read speed: 1653.96 Kb/s
11/4/2017 4:04:14 PM> Partition name: system
11/4/2017 4:04:14 PM> Address: 00000C000000, size: 0000C0800000
11/4/2017 4:04:14 PM> eMMC switching to ROM1
11/4/2017 4:04:14 PM> Reading partition...
11/4/2017 4:04:35 PM>
11/4/2017 4:04:35 PM> Stopped by User request...
11/4/2017 4:04:35 PM>
11/4/2017 4:05:24 PM> Looking for EasyJTAG box...
11/4/2017 4:05:24 PM> EasyJTAG API ver. 2008
11/4/2017 4:05:24 PM> Setting IO Levels to 1.8V
11/4/2017 4:05:24 PM> Setting frequence to 14 Mhz
11/4/2017 4:05:24 PM> HiPower mode is OFF
11/4/2017 4:05:25 PM> OpenUSB returned = 0
11/4/2017 4:05:25 PM> Power Controller returned = 0
11/4/2017 4:05:26 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:05:26 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:05:26 PM> HiPower mode is OFF
11/4/2017 4:05:26 PM> Frequence: 14 Mhz
11/4/2017 4:05:26 PM> CMD Pullup Level: 1701 mV
11/4/2017 4:05:26 PM> CMD Active Level: 1763 mV
11/4/2017 4:05:26 PM> eMMC Init returned = 0
11/4/2017 4:05:26 PM> EMMC Device Information :
11/4/2017 4:05:26 PM> EMMC CID: 90014A483847347592010DC949235464
11/4/2017 4:05:26 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
11/4/2017 4:05:26 PM> EMMC Manufacture Name: SKHYNIX
11/4/2017 4:05:27 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A
11/4/2017 4:05:27 PM> EMMC Manufacture Date: 5/2017 , Rev: 01
11/4/2017 4:05:27 PM> EMMC NAME: H8G4u , S/N: 0DC94923 , rev. 01
11/4/2017 4:05:27 PM> EMMC NAME (HEX): 483847347592
11/4/2017 4:05:27 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
11/4/2017 4:05:27 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/4/2017 4:05:27 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/4/2017 4:05:27 PM> EMMC Permanent Write Protection: No
11/4/2017 4:05:27 PM> EMMC Temporary Write Protection: No
11/4/2017 4:05:27 PM> Extended CSD Information :
11/4/2017 4:05:27 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/4/2017 4:05:27 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/4/2017 4:05:27 PM> Boot Bus Config: 0x00 , width 1bit
11/4/2017 4:05:27 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
11/4/2017 4:05:27 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/4/2017 4:05:27 PM> Device supports partitioning features
11/4/2017 4:05:27 PM> Device can have enhanced technological features in partitions and user data area
11/4/2017 4:05:27 PM> Device can have extended partitions attribute
11/4/2017 4:05:27 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/4/2017 4:05:27 PM> Backup saved: H8G4u_0DC94923_20171104_160527.extcsd
11/4/2017 4:05:27 PM> EMMC Init completed.
11/4/2017 4:05:27 PM>
11/4/2017 4:05:27 PM> Pit-file created successfully
11/4/2017 4:05:27 PM>
11/4/2017 4:05:27 PM> Backup partition: PrimaryGPT
11/4/2017 4:05:27 PM> Address: 000000000000, size: 000000004400
11/4/2017 4:05:28 PM> GPTHeader is valid
11/4/2017 4:05:28 PM>
11/4/2017 4:05:28 PM> Partition name: bootloader_rom2
11/4/2017 4:05:28 PM> Address: 000000000000, size: 000000400000
11/4/2017 4:05:28 PM> eMMC switching to ROM2
11/4/2017 4:05:28 PM> Reading partition...
11/4/2017 4:05:31 PM> Done reading partition. Read speed: 1294.14 Kb/s
11/4/2017 4:05:31 PM> Partition name: nvram
11/4/2017 4:05:31 PM> Address: 000000800000, size: 000000800000
11/4/2017 4:05:31 PM> eMMC switching to ROM1
11/4/2017 4:05:31 PM> Reading partition...
11/4/2017 4:05:36 PM> Done reading partition. Read speed: 1607.12 Kb/s
11/4/2017 4:05:36 PM> Partition name: efuse
11/4/2017 4:05:36 PM> Address: 000001B80000, size: 000000080000
11/4/2017 4:05:36 PM> eMMC switching to ROM1
11/4/2017 4:05:37 PM> Reading partition...
11/4/2017 4:05:37 PM> Done reading partition. Read speed: 1653.05 Kb/s
11/4/2017 4:05:37 PM> Partition name: EFS
11/4/2017 4:05:37 PM> Address: 000002800000, size: 000000800000
11/4/2017 4:05:37 PM> eMMC switching to ROM1
11/4/2017 4:05:37 PM> Reading partition...
11/4/2017 4:05:42 PM> Done reading partition. Read speed: 1575.02 Kb/s
11/4/2017 4:05:42 PM> Partition name: nvdata
11/4/2017 4:05:42 PM> Address: 000003000000, size: 000002000000
11/4/2017 4:05:42 PM> eMMC switching to ROM1
11/4/2017 4:05:43 PM> Reading partition...
11/4/2017 4:06:03 PM> Done reading partition. Read speed: 1610.76 Kb/s
11/4/2017 4:06:03 PM> Partition name: recovery
11/4/2017 4:06:03 PM> Address: 000005800000, size: 000001000000
11/4/2017 4:06:03 PM> eMMC switching to ROM1
11/4/2017 4:06:03 PM> Reading partition...
11/4/2017 4:06:20 PM> Done reading partition. Read speed: 985.20 Kb/s
11/4/2017 4:06:20 PM> Partition name: boot
11/4/2017 4:06:20 PM> Address: 000006800000, size: 000001000000
11/4/2017 4:06:20 PM> eMMC switching to ROM1
11/4/2017 4:06:20 PM> Reading partition...
11/4/2017 4:06:36 PM> Done reading partition. Read speed: 1043.76 Kb/s
11/4/2017 4:06:36 PM> Partition name: keystore
11/4/2017 4:06:36 PM> Address: 000009C00000, size: 000000800000
11/4/2017 4:06:36 PM> eMMC switching to ROM1
11/4/2017 4:06:36 PM> Reading partition...
11/4/2017 4:06:41 PM> Done reading partition. Read speed: 1637.87 Kb/s
11/4/2017 4:06:41 PM> Partition name: omekeystore
11/4/2017 4:06:41 PM> Address: 00000A400000, size: 000000380000
11/4/2017 4:06:41 PM> eMMC switching to ROM1
11/4/2017 4:06:41 PM> Reading partition...
11/4/2017 4:06:43 PM> Done reading partition. Read speed: 1626.63 Kb/s
11/4/2017 4:06:43 PM> Partition name: proinfo
11/4/2017 4:06:43 PM> Address: 00000A780000, size: 000000280000
11/4/2017 4:06:43 PM> eMMC switching to ROM1
11/4/2017 4:06:44 PM> Reading partition...
11/4/2017 4:06:45 PM> Done reading partition. Read speed: 1646.74 Kb/s
11/4/2017 4:06:45 PM> Partition name: RESERVE2
11/4/2017 4:06:45 PM> Address: 00000BC00000, size: 000000400000
11/4/2017 4:06:45 PM> eMMC switching to ROM1
11/4/2017 4:06:45 PM> Reading partition...
11/4/2017 4:06:48 PM> Done reading partition. Read speed: 1625.72 Kb/s
11/4/2017 4:06:48 PM>
11/4/2017 4:06:48 PM> All done
11/4/2017 4:06:48 PM>
11/4/2017 4:07:24 PM> Looking for EasyJTAG box...
11/4/2017 4:07:24 PM> EasyJTAG API ver. 2008
11/4/2017 4:07:24 PM> Setting IO Levels to 1.8V
11/4/2017 4:07:24 PM> Setting frequence to 14 Mhz
11/4/2017 4:07:24 PM> HiPower mode is OFF
11/4/2017 4:07:25 PM> OpenUSB returned = 0
11/4/2017 4:07:25 PM> Power Controller returned = 0
11/4/2017 4:07:26 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:07:26 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:07:26 PM> HiPower mode is OFF
11/4/2017 4:07:26 PM> Frequence: 14 Mhz
11/4/2017 4:07:26 PM> CMD Pullup Level: 1701 mV
11/4/2017 4:07:26 PM> CMD Active Level: 1753 mV
11/4/2017 4:07:26 PM> eMMC Init returned = 0
11/4/2017 4:07:26 PM> EMMC Device Information :
11/4/2017 4:07:26 PM> EMMC CID: 90014A483847347592010DC949235464
11/4/2017 4:07:26 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
11/4/2017 4:07:26 PM> EMMC Manufacture Name: SKHYNIX
11/4/2017 4:07:26 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A
11/4/2017 4:07:26 PM> EMMC Manufacture Date: 5/2017 , Rev: 01
11/4/2017 4:07:26 PM> EMMC NAME: H8G4u , S/N: 0DC94923 , rev. 01
11/4/2017 4:07:26 PM> EMMC NAME (HEX): 483847347592
11/4/2017 4:07:26 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
11/4/2017 4:07:26 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/4/2017 4:07:26 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/4/2017 4:07:26 PM> EMMC Permanent Write Protection: No
11/4/2017 4:07:26 PM> EMMC Temporary Write Protection: No
11/4/2017 4:07:26 PM> Extended CSD Information :
11/4/2017 4:07:26 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/4/2017 4:07:26 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/4/2017 4:07:26 PM> Boot Bus Config: 0x00 , width 1bit
11/4/2017 4:07:26 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
11/4/2017 4:07:26 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/4/2017 4:07:26 PM> Device supports partitioning features
11/4/2017 4:07:26 PM> Device can have enhanced technological features in partitions and user data area
11/4/2017 4:07:26 PM> Device can have extended partitions attribute
11/4/2017 4:07:26 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/4/2017 4:07:26 PM> Backup saved: H8G4u_0DC94923_20171104_160726.extcsd
11/4/2017 4:07:26 PM> EMMC Init completed.
11/4/2017 4:07:26 PM>
11/4/2017 4:07:26 PM> Opening file: D:\MOBILE UTILITIES\SAMSUNG\G532G\PIT-SM-G532G-15-03-2017_09-07-10.pit
11/4/2017 4:07:26 PM>
11/4/2017 4:07:26 PM> Pit: PIT-SM-G532G-15-03-2017_09-07-10.pit
11/4/2017 4:07:26 PM> Entry count: 34
11/4/2017 4:07:26 PM>
11/4/2017 4:07:26 PM> The size of the last section has been updated
11/4/2017 4:07:37 PM> Selected file: D:\MOBILE UTILITIES\SAMSUNG\G532G\G532GDXU1APL1_OLB1APK3\BL_ G532GDXU1APL1_CL9387420_QB11825614_REV00_user_low_ ship_MULTI_CERT.tar.md5
11/4/2017 4:07:37 PM>
11/4/2017 4:07:37 PM> BL_G532GDXU1APL1_CL9387420_QB11825614_REV00_user_l ow_ship_MULTI_CERT.tar.md5
11/4/2017 4:07:37 PM> The list of files in the firmware:
11/4/2017 4:07:37 PM> preloader.img
11/4/2017 4:07:37 PM> lk.bin
11/4/2017 4:07:37 PM> param.bin
11/4/2017 4:07:37 PM> trustzone.bin
11/4/2017 4:07:37 PM> efuse.img
11/4/2017 4:07:37 PM>
11/4/2017 4:07:46 PM> Looking for EasyJTAG box...
11/4/2017 4:07:46 PM> EasyJTAG API ver. 2008
11/4/2017 4:07:46 PM> Setting IO Levels to 1.8V
11/4/2017 4:07:46 PM> Setting frequence to 14 Mhz
11/4/2017 4:07:46 PM> HiPower mode is OFF
11/4/2017 4:07:47 PM> OpenUSB returned = 0
11/4/2017 4:07:47 PM> Power Controller returned = 0
11/4/2017 4:07:48 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:07:48 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:07:48 PM> HiPower mode is OFF
11/4/2017 4:07:48 PM> Frequence: 14 Mhz
11/4/2017 4:07:48 PM> CMD Pullup Level: 1691 mV
11/4/2017 4:07:48 PM> CMD Active Level: 1773 mV
11/4/2017 4:07:48 PM> eMMC Init returned = 0
11/4/2017 4:07:48 PM> EMMC Device Information :
11/4/2017 4:07:48 PM> EMMC CID: 90014A483847347592010DC949235464
11/4/2017 4:07:48 PM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
11/4/2017 4:07:48 PM> EMMC Manufacture Name: SKHYNIX
11/4/2017 4:07:48 PM> EMMC Manufacture ID: 0x90 , OEM ID: 014A
11/4/2017 4:07:48 PM> EMMC Manufacture Date: 5/2017 , Rev: 01
11/4/2017 4:07:48 PM> EMMC NAME: H8G4u , S/N: 0DC94923 , rev. 01
11/4/2017 4:07:48 PM> EMMC NAME (HEX): 483847347592
11/4/2017 4:07:48 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
11/4/2017 4:07:48 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/4/2017 4:07:48 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/4/2017 4:07:48 PM> EMMC Permanent Write Protection: No
11/4/2017 4:07:48 PM> EMMC Temporary Write Protection: No
11/4/2017 4:07:48 PM> Extended CSD Information :
11/4/2017 4:07:48 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/4/2017 4:07:48 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/4/2017 4:07:48 PM> Boot Bus Config: 0x00 , width 1bit
11/4/2017 4:07:48 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
11/4/2017 4:07:48 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/4/2017 4:07:48 PM> Device supports partitioning features
11/4/2017 4:07:48 PM> Device can have enhanced technological features in partitions and user data area
11/4/2017 4:07:48 PM> Device can have extended partitions attribute
11/4/2017 4:07:48 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/4/2017 4:07:48 PM> Backup saved: H8G4u_0DC94923_20171104_160748.extcsd
11/4/2017 4:07:49 PM> EMMC Init completed.
11/4/2017 4:07:49 PM>
11/4/2017 4:07:49 PM> Operation: Write by vendor (Samsung)
11/4/2017 4:07:49 PM>
11/4/2017 4:07:49 PM> Creating GPT-partitioninig
11/4/2017 4:07:49 PM> Writing PIT at address: 000000004400
11/4/2017 4:07:49 PM> GPT-partitioning done
11/4/2017 4:07:49 PM>
11/4/2017 4:07:49 PM> Unpacking file: preloader.img
11/4/2017 4:07:49 PM> Unpacking file: lk.bin
11/4/2017 4:07:49 PM> Unpacking file: efuse.img
11/4/2017 4:07:49 PM> Unpacking file: trustzone.bin
11/4/2017 4:07:49 PM> Unpacking file: param.bin
11/4/2017 4:07:49 PM>
11/4/2017 4:07:49 PM> Partition name: BOOTLOADER
11/4/2017 4:07:49 PM> Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
11/4/2017 4:07:49 PM> eMMC switching to ROM2
11/4/2017 4:07:49 PM> Erasing partition...
11/4/2017 4:07:56 PM> Writing partition...
11/4/2017 4:07:57 PM> Done writing partition. Write speed: 305.61 Kb/s
11/4/2017 4:07:57 PM> Partition name: LK
11/4/2017 4:07:57 PM> Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
11/4/2017 4:07:57 PM> eMMC switching to ROM1
11/4/2017 4:07:57 PM> Erasing partition...
11/4/2017 4:07:58 PM> Writing partition...
11/4/2017 4:08:00 PM> Done writing partition. Write speed: 436.22 Kb/s
11/4/2017 4:08:00 PM> Partition name: EFUSE
11/4/2017 4:08:00 PM> Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
11/4/2017 4:08:00 PM> eMMC switching to ROM1
11/4/2017 4:08:00 PM> Erasing partition...
11/4/2017 4:08:00 PM> Writing partition...
11/4/2017 4:08:00 PM> Done writing partition. Write speed: 43.24 Kb/s
11/4/2017 4:08:00 PM> Partition name: TEE1
11/4/2017 4:08:00 PM> Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
11/4/2017 4:08:00 PM> eMMC switching to ROM1
11/4/2017 4:08:01 PM> Erasing partition...
11/4/2017 4:08:01 PM> Writing partition...
11/4/2017 4:08:02 PM> Done writing partition. Write speed: 858.82 Kb/s
11/4/2017 4:08:02 PM> Partition name: PARAM
11/4/2017 4:08:02 PM> Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
11/4/2017 4:08:02 PM> eMMC switching to ROM1
11/4/2017 4:08:02 PM> Erasing partition...
11/4/2017 4:08:03 PM> Writing partition...
11/4/2017 4:08:04 PM> Done writing partition. Write speed: 825.82 Kb/s
11/4/2017 4:08:04 PM>
11/4/2017 4:08:04 PM> All done
11/4/2017 4:08:04 PM>
11/4/2017 4:08:53 PM> Selected file: D:\MOBILE UTILITIES\SAMSUNG\G532G\G532GDXU1APL1_OLB1APK3\AP_ G532GDXU1APL1_CL9387420_QB11825614_REV00_user_low_ ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> AP_G532GDXU1APL1_CL9387420_QB11825614_REV00_user_l ow_ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> The list of files in the firmware:
11/4/2017 4:08:53 PM> boot.img
11/4/2017 4:08:53 PM> recovery.img
11/4/2017 4:08:53 PM> system.img
11/4/2017 4:08:53 PM> secro.img
11/4/2017 4:08:53 PM> userdata.img
11/4/2017 4:08:53 PM>
11/4/2017 4:08:53 PM> Selected file: D:\MOBILE UTILITIES\SAMSUNG\G532G\G532GDXU1APL1_OLB1APK3\AP_ G532GDXU1APL1_CL9387420_QB11825614_REV00_user_low_ ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> BL_G532GDXU1APL1_CL9387420_QB11825614_REV00_user_l ow_ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> The list of files in the firmware:
11/4/2017 4:08:53 PM> preloader.img
11/4/2017 4:08:53 PM> lk.bin
11/4/2017 4:08:53 PM> param.bin
11/4/2017 4:08:53 PM> trustzone.bin
11/4/2017 4:08:53 PM> efuse.img
11/4/2017 4:08:53 PM>
11/4/2017 4:08:53 PM> Selected file: D:\MOBILE UTILITIES\SAMSUNG\G532G\G532GDXU1APL1_OLB1APK3\AP_ G532GDXU1APL1_CL9387420_QB11825614_REV00_user_low_ ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> CP_G532GDXU1APK3_CL9387420_QB11574326_REV00_user_l ow_ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> The list of files in the firmware:
11/4/2017 4:08:53 PM> md1rom.img
11/4/2017 4:08:53 PM> md1dsp.img
11/4/2017 4:08:53 PM>
11/4/2017 4:08:53 PM> Selected file: D:\MOBILE UTILITIES\SAMSUNG\G532G\G532GDXU1APL1_OLB1APK3\AP_ G532GDXU1APL1_CL9387420_QB11825614_REV00_user_low_ ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> CSC_OLB_G532GOLB1APK3_CL9387420_QB11574326_REV00_u ser_low_ship_MULTI_CERT.tar.md5
11/4/2017 4:08:53 PM> The list of files in the firmware:
11/4/2017 4:08:53 PM> grandpplte_cis_ser.pit
11/4/2017 4:08:53 PM> cache.img
11/4/2017 4:08:53 PM> hidden.img
11/4/2017 4:08:53 PM>
11/4/2017 4:08:58 PM> Looking for EasyJTAG box...
11/4/2017 4:08:58 PM> EasyJTAG API ver. 2008
11/4/2017 4:08:58 PM> Setting IO Levels to 1.8V
11/4/2017 4:08:58 PM> Setting frequence to 14 Mhz
11/4/2017 4:08:58 PM> HiPower mode is OFF
11/4/2017 4:08:59 PM> OpenUSB returned = 0
11/4/2017 4:08:59 PM> Power Controller returned = 0
11/4/2017 4:09:00 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:09:00 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:09:00 PM> HiPower mode is OFF
11/4/2017 4:09:00 PM> Frequence: 14 Mhz
11/4/2017 4:09:00 PM> CMD Pullup Level: 1742 mV
11/4/2017 4:09:00 PM> CMD Active Level: 1722 mV
11/4/2017 4:09:00 PM> eMMC Init returned = -1
11/4/2017 4:09:00 PM> Can't init device. Reason: CMD Timeout Error
11/4/2017 4:09:00 PM>
11/4/2017 4:09:08 PM> Looking for EasyJTAG box...
11/4/2017 4:09:08 PM> EasyJTAG API ver. 2008
11/4/2017 4:09:08 PM> Setting IO Levels to 1.8V
11/4/2017 4:09:08 PM> Setting frequence to 14 Mhz
11/4/2017 4:09:08 PM> HiPower mode is OFF
11/4/2017 4:09:09 PM> OpenUSB returned = 0
11/4/2017 4:09:09 PM> Power Controller returned = 0
11/4/2017 4:09:10 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:09:10 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:09:10 PM> HiPower mode is OFF
11/4/2017 4:09:10 PM> Frequence: 14 Mhz
11/4/2017 4:09:10 PM> CMD Pullup Level: 1711 mV
11/4/2017 4:09:10 PM> CMD Active Level: 1732 mV
11/4/2017 4:09:10 PM> eMMC Init returned = -1
11/4/2017 4:09:10 PM> Can't init device. Reason: CMD Timeout Error
11/4/2017 4:09:10 PM>
11/4/2017 4:09:39 PM> Looking for EasyJTAG box...
11/4/2017 4:09:39 PM> EasyJTAG API ver. 2008
11/4/2017 4:09:39 PM> Setting IO Levels to 1.8V
11/4/2017 4:09:39 PM> Setting frequence to 14 Mhz
11/4/2017 4:09:39 PM> HiPower mode is OFF
11/4/2017 4:09:40 PM> OpenUSB returned = 0
11/4/2017 4:09:40 PM> Power Controller returned = 0
11/4/2017 4:09:41 PM> EasyJTAG Box Serial = 0300F00C83528FA7
11/4/2017 4:09:41 PM> EasyJTAG Box Firmware = 01.60
11/4/2017 4:09:41 PM> HiPower mode is OFF
11/4/2017 4:09:41 PM> Frequence: 14 Mhz
11/4/2017 4:09:41 PM> CMD Pullup Level: 1691 mV
11/4/2017 4:09:41 PM> CMD Active Level: 1763 mV
11/4/2017 4:09:41 PM> eMMC Init returned = -1
11/4/2017 4:09:41 PM> Can't init device. Reason: CMD Timeout Error
11/4/2017 4:09:41 PM>

[eumore79]

before i write i read vendor without the system check

please help on this unit

[cicakndut]

i think emmc is dead. try to reconnect all the lines and add more power to it.

[eumore79]

how come it become the emmc dead?

[cicakndut]

your last log, emmc name MMOR rom1 size 128mb. there are 2 possibilities, dead chip or needed more power. other possibilities is that your box is faulty. if your box is good, works with other then try adding more poweer in connection if it didint work then the emmc is dead, and by dead i mean its not gonna work anymore even if you work on it.

[eumore79]

this phone only dead after flash
after unlock need to flash because its rebooting
when after flash it wont power on so it is in dead boot state

[umarmsn]

Originally Posted by eumore79

this phone only dead after flash
after unlock need to flash because its rebooting
when after flash it wont power on so it is in dead boot state

do you have backup before oprate

[Jawood]

what is the history if device? is it software related or it comes dead without doing anything?

[ralel]

EMMC NAME: H8G4u , S/N: 0DC94923 , rev. 01

EMMC NAME: M MOR , S/N: 00000240 , rev. A1

according to your logs, your emmc became M MOR which is completly corrupted and need to replace

[eumore79]

phone is now ok after i use additional power via usb

i was able to recover the phone. phone is now ok and working

[cicakndut]

Originally Posted by eumore79

phone is now ok after i use additional power via usb

i was able to recover the phone. phone is now ok and working

exactly how i said it is, good for you.