repair boot samsung N8000 done with easy jtag

[ramin_le]

hi

thanks z3x team for suport this model

just write N8000_Rom2_Boot_BN_2.bin in support

and put phone in dl mode and flash with any firmware

EasyJtag Suite ver.: 1.0.101.0 started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
Successefuly connected to box on COM38
Box S/N: 1010060A9C4C80F7, ,FW Ver.: 01.48
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AA9A-C238 , ver: 22 

Successfully connected to box on COM38
Box S/N: 1010060A9C4C80F7, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1330 mV
CMD Active Level:1918 mV
EMMC CID 45010053454D3136479009B275B3B027
EMMC CSD D00F00320F5903FFFFFFFFFF92404011
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 11/1997 FW rev.0x90
EMMC NAME: SEM16G , S/N: 162690483
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: SEM16G_ 162690483_20140204_1424.extcsd
Done.
Writing file...D:\BOX\Z3X EASY JTAG\Samsung\GT-N8000\N8000_Dump_file_BN\N8000_Rom2_Boot_BN_2.bin

Successfully connected to box on COM38
Box S/N: 1010060A9C4C80F7, ,FW Ver.: 01.48
Loading eMMC Addon Firmware...
CMD Pullup Level:1320 mV
CMD Active Level:1918 mV
EMMC CID 45010053454D3136479009B275B3B027
EMMC CSD D00F00320F5903FFFFFFFFFF92404011
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 11/1997 FW rev.0x90
EMMC NAME: SEM16G , S/N: 162690483
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 222 kB/s
Done !!!
Running:Repair extCSD...

[vanhien26]

Please,send me the jtag pinout please

[oktay50000]

Originally Posted by vanhien26

Please,send me the jtag pinout please

jtag disabled must use emmc pins

[DJ Morgan]

there's incorrect GT-N8000 eMMC pinout in support server, correct one in attachement

[balestier]

can u shared this file N8000_Rom2_Boot_BN_2.bin
because i cant find from support?

[balestier]

ok i get it .... thanks

[jackjuntak]

Originally Posted by balestier

ok i get it .... thanks

plz upload this N 8000 dump file here..

thx in adv.




Br,

[.::niroshan::.]

here video guide
https://www.youtube.com/watch?v=ZQI518DwzBE

[luckycool]

Originally Posted by .::niroshan::.

here video guide
https://www.youtube.com/watch?v=ZQI518DwzBE

The same operation ends up with errors on the latest JTAG PLUS LOL..

What a shame .. I hope they fix the errors with latest box and we can start working.. lol . Or may be i need to buy z3x jtag (old) box.