Samsung G530H boot repair and eMMC change problem and solution thread - Page 2 - GSM-Forum

Qurait Butt · 12-08-2015, 11:25

atf jtag working for this model plz

sobaro · 12-09-2015, 20:47

i get Can't init device, Reason: CMD Timeout Error

what is that mean

kk2sna · 12-10-2015, 18:57

cant init means emmc bad or check soldering

NsNobel2 · 12-11-2015, 15:20

my badluck clk resistence remove during soldring

any idea?

duncan99 · 12-14-2015, 23:35

Quote:

Originally Posted by NsNobel2

my badluck clk resistence remove during soldring

any idea?

get resistor from another same device.
maybe dead or something..
i will check schme... to know the exact value of resistor

duncan99 · 12-14-2015, 23:35

Quote:

Originally Posted by Ni****h

Never Post Password Protected File Links , It's against the forum rules.

sorry bro but i posted the password on the same thread

duncan99 · 12-14-2015, 23:37

Quote:

Originally Posted by kk2sna

cant init means emmc bad or check soldering

100% bad soldering...
use multimeter make sure soldering ok

duncan99 · 12-14-2015, 23:46

Quote:

Originally Posted by qurait butt

atf jtag working for this model plz

yes atf easyjtag can use the file

NsNobel2 · 12-15-2015, 09:24

Quote:

Originally Posted by duncan99

get resistor from another same device.
maybe dead or something..
i will check schme... to know the exact value of resistor

i have that resistance in my procession but it is too difficult to sold back on the board, is it possible to solder wire on that point without resistance?

G.M.C · 12-15-2015, 13:37

how can i remove security code of nokia 502 with mxkey...
pls help me

duncan99 · 12-21-2015, 05:56

Quote:

Originally Posted by kk2sna

cant init means emmc bad or check soldering

bad soldering
check again

duncan99 · 12-21-2015, 05:58

Quote:

Originally Posted by NsNobel2

i have that resistance in my procession but it is too difficult to sold back on the board, is it possible to solder wire on that point without resistance?

no .... the resistor must be there...
it has a part to play...
for soldering back use microscope...it will be easy...

anasshe · 12-27-2015, 22:56

is this for G530H XC or G530H XX ????????

HOANGMUNG · 01-03-2016, 09:56

password file ? help

duncan99 · 01-03-2016, 21:31

Quote:

Originally Posted by anasshe

is this for G530H XC or G530H XX ????????

both can use the file.
thanks in advance

12-08-2015, 11:25	#16 (permalink)
Qurait Butt Freak Poster Join Date: Oct 2014 Posts: 113 Member: 2278092 Status: Offline Thanks Meter: 11	atf jtag working for this model plz

12-09-2015, 20:47	#17 (permalink)
sobaro No Life Poster Join Date: Nov 2007 Location: Arizona Age: 38 Posts: 679 Member: 630795 Status: Offline Thanks Meter: 177	i get Can't init device, Reason: CMD Timeout Error what is that mean

12-10-2015, 18:57	#18 (permalink)
kk2sna No Life Poster Join Date: Jan 2007 Posts: 536 Member: 427344 Status: Offline Sonork: 100.1666688 Thanks Meter: 213	cant init means emmc bad or check soldering

12-11-2015, 15:20	#19 (permalink)
NsNobel2 No Life Poster Join Date: Jan 2012 Posts: 629 Member: 1713296 Status: Offline Thanks Meter: 67	my badluck clk resistence remove during soldring any idea?

12-15-2015, 13:37	#25 (permalink)
G.M.C Junior Member Join Date: Nov 2015 Posts: 5 Member: 2485528 Status: Offline Thanks Meter: 1	how can i remove security code of nokia 502 with mxkey... pls help me

12-27-2015, 22:56	#28 (permalink)
anasshe No Life Poster Join Date: Dec 2005 Location: syria Posts: 995 Member: 205475 Status: Offline Thanks Meter: 179	is this for G530H XC or G530H XX ????????

01-03-2016, 09:56	#29 (permalink)
HOANGMUNG Junior Member Join Date: Aug 2015 Location: hochiminh Posts: 34 Member: 2437842 Status: Offline Thanks Meter: 6	password file ? help