samsung i9195 partition help pls

[bekja1]

Hi


i have a new blank emmc and i want to configure partitions for s4 mini i9195 can you help me please

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 0FFFA01F88E96F94, ,FW Ver.: 01.58
CMD Pullup Level:1691 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 45010053454D30384790C0D8FD613080
EMMC CSD : D00F00320F5903FFFFFFFFFF92404010
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 03/2013 Rev.0x90
EMMC NAME: SEM08G , S/N: 3235446113
EMMC NAME (HEX): 53454D30384700
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: SEM08G_3235446113_20170419_1546.extcsd
Done.

[yigal71]

https://mega.nz/#F!7VERHQ4a!qqkAGqhG1NGVa-U48bOpaQ

[bekja1]

Originally Posted by yigal71

https://mega.nz/#F!7VERHQ4a!qqkAGqhG1NGVa-U48bOpaQ

thank boot i change emmc i put new now i want to do partition rom
not pit