sm-g532f dead boot repair

[jennydahan]

PROCEDURE:
disassemble the phone
solder emmc pin out
open easy jtag software
goto emmc tab
connect emmc adapter to phone and easy jtagbox
use usb cable as power supply to phone pcb
set 2.8v voltage
hit detect emmc card
if emmc detected meaning your emmc connection is correct and phone emmc is alive
download rom1 and rom2 epair file from eeasy jtag support shell
extract rom1 and write to phone "take note you see many retry but its ok tha important is writing successfull on easy jtag logs area"
after writing rom1
extract rom 2 then write to phone emmc
were almost done boot repair
assemble the phone at you see the result bootloop status
then proceed full flash with official firmware
in my case im usng z3x pro
i download the file from z3x support area
after fullflashing phone have stock in revovery mode all you have to do is to perform factory reset
and see the result ITS FINALLY DONE
THE PHONE IS SUCCESSFULLY REVIVE FROM SUDDEN DEATH
thank you for veing my thread *** bless you all

[Pijush Das]

Many Many Thanks 'Dear jennydahan' for this helpfull Information...
..*..BEST OF LUCK..*..

[jennydahan]

Originally Posted by Pijush Das

Many Many Thanks 'Dear jennydahan' for this helpfull Information...
..*..BEST OF LUCK..*..

youre welcome bro thank you for viewing my thread

[mgc03]

philippines maestro..when it comes to jtag services..i've learned a lot of you sir jennydahan..

thanks

[Wingstel]

flash after dead


samsung G532F Boot repair done but still dead


how to solved help anybody

[ilyasrao]

Originally Posted by Wingstel

flash after dead


samsung G532F Boot repair done but still dead


how to solved help anybody

detect emmc and upload log for better help

[.:MobileLife:.]

Originally Posted by Wingstel

flash after dead


samsung G532F Boot repair done but still dead


how to solved help anybody

Need full logs with Read Soft Partitions.

[md.nazmul]

Originally Posted by .:MobileLife:.

Need full logs with Read Soft Partitions.

sir see full logs with Read Soft Partitions

[.:MobileLife:.]

Originally Posted by md.nazmul

sir see full logs with Read Soft Partitions

need logs with Easy Jtag tool.

[md.nazmul]

EasyJtag Suite ver.: 2.3.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7600).
undefined
Android Explorer ver.: 1.0.0.6
eMMC ODIN ver.: 1.0.0.8
Successfully connected to box on COM5
Box S/N: 0CFF4012558EC295, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AAE8-ECBB , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [SAMS] : NOT ACTIVATED , ACTIVATE NOW
Z3X Card Activation [JTAG] : ACTIVATED
Checking NAND Image : C:\Users\nazmul\Desktop\New folder\Samsung_SM-G532F_dump_rom1_192mb\Samsung_SM-G532F_dump_rom1_192mb.bin
File successefuly loaded!
Processing file...C:\Users\nazmul\Desktop\New folder\Samsung_SM-G532F_dump_rom1_192mb\Samsung_SM-G532F_dump_rom1_192mb.bin
Z3X EasyJtag Software ver. 2.3.0.0
Loading eMMC Addon Firmware...
CMD Pullup Level:2052 mVCMD Active Level:2310 mV
Input file : C:\Users\nazmul\Desktop\New folder\Samsung_SM-G532F_dump_rom1_192mb\Samsung_SM-G532F_dump_rom1_192mb.binWriting 0000400000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 1337 kB/s

[cicakndut]

detection log sir not flashing log.

[deepakgarg]

using old firmware will not help always use latest firmware for boot repair

[Jani-Jan]

I checked many time this model for boot repair but all times fail. Easy jtag write by vender have many bugs and complecations.

Sent from my SAMSUNG-SM-G920A using Tapatalk

[hiifi]

hi evryone mi probleme is with G532G dead during flash i repaired boot using easyjtag successfully but phone not power also probleme with G532f repair done using rom1 rom2 writh flash direct emmc but phone sttile dead i need helpe of you thanks in advance.

[Jani-Jan]

I was. faced sam problem with easyjtag. I think some thing wrong with this model..