GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag

Reply
 
LinkBack Thread Tools Display Modes
Old 09-02-2018, 11:41   #151 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 42
Posts: 681
Member: 13148
Status: Offline
Thanks Meter: 679

Quote:
Originally Posted by lifegood8 View Post
still problam not solve i have 4 pice same problam and this phone dead on flasing not a hadwaer problam.
Explain to me how many phones is die on firmware flashing without hardware problem?

If any model constantly dies with firmware flashing, maybe this is a problem in the hardware of model?
  Reply With Quote
Old 09-11-2018, 00:20   #152 (permalink)
Freak Poster
 
Join Date: Mar 2018
Location: Future....
Posts: 117
Member: 2825953
Status: Offline
Thanks Meter: 41
G532f dead boot repair done, but still dead not come on to download mode

Get firmware version
Firmware info not found

Setting frequence to 21 Mhz
CMD Pullup Level: 1753 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220233.extcsd
EMMC Init completed.

Writing eMMC Register ...
Reg: 179 Value: 0x48
Successfully

Setting frequence to 21 Mhz
CMD Pullup Level: 1732 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220243.extcsd
EMMC Init completed.

Writing eMMC Register ...
Reg: 177 Value: 0x00
Successfully

Setting frequence to 21 Mhz
CMD Pullup Level: 1732 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220301.extcsd
EMMC Init completed.

Opening file: GRANDPPLTE_CIS_SER.pit

Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34

The size of the last section has been updated

BL_G532FXXU1AQC2_CL10340273_QB12918482_REV00_user_ low_ship_MULTI_CERT.tar
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

Setting frequence to 21 Mhz
CMD Pullup Level: 1722 mV
CMD Active Level: 2289 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220319.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 249.58 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 507.89 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 40.66 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 506.01 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 510.40 KB/s

Partition CACHE : formatting as EXT4. Please wait ...
Formatting completed
Partition HIDDEN : formatting as EXT4. Please wait ...
Formatting completed

Partition EFS : formatting as EXT4. Please wait ...
Formatting completed

All done time: [00:00:50:290]

Setting frequence to 21 Mhz
CMD Pullup Level: 0 mV
CMD Active Level: 2165 mV
Can't init device. Reason: CMD Timeout Error

Setting frequence to 21 Mhz
CMD Pullup Level: 1722 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220520.extcsd
EMMC Init completed.

Get firmware version

Firmware info not found

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220650.extcsd
EMMC Init completed.

Opening file: GRANDPPLTE_CIS_SER.pit

Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34

The size of the last section has been updated

BL_G532FXWU1AQB5_CL10802954_QB12732196_REV00_user_ low_ship_MULTI_CERT.tar
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

Setting frequence to 21 Mhz
CMD Pullup Level: 1722 mV
CMD Active Level: 2279 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220659.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 247.62 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 507.99 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 46.27 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 507.55 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 510.96 KB/s

All done time: [00:00:23:728]

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2279 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220730.extcsd
EMMC Init completed.

Get firmware version

Firmware info not found

Error: This is not a firmware package: G532F_dump_write_by_vendor_Samsung_G532FXXU1AQG2.z ip

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220816.extcsd
EMMC Init completed.

Operation: Write Dump

The size has been corrected for the file size

Writing to: ROM1 , start: 0x000000000000 , size: 0x000002376220
Input file: C:\Users\Bismillah\Desktop\g532f\G532F_dump_write_ by_vendor_Samsung_G532FXXU1AQG2.zip
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 505.07 KB/s

All done time: [00:01:12:197]

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2279 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221043.extcsd
EMMC Init completed.

This operation is only performed for the Samsung eMMC

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221108.extcsd
EMMC Init completed.

Setting frequence to 21 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221113.extcsd
EMMC Init completed.

This operation is only performed for the Samsung eMMC

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221118.extcsd
EMMC Init completed.

Operation: Changing GP sizes (test mode) ...

GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP1 size: 0 MB , WR_REL: 1 , ENH 0

HW_PART error. Reason: Card already partitioned

Setting frequence to 21 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221126.extcsd
EMMC Init completed.

Operation: Changing GP sizes (final write) ...

GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP1 size: 0 MB , WR_REL: 1 , ENH 0

HW_PART error. Reason: Card already partitioned

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221143.extcsd
EMMC Init completed.

Writing eMMC Register ...
Reg: 179 Value: 0x48
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Successfully

Setting frequence to 21 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221154.extcsd
EMMC Init completed.

Operation: Write Dump

The size has been corrected for the file size

Writing to: ROM1 , start: 0x000000000000 , size: 0x000002376220
Input file: C:\Users\Bismillah\Desktop\g532f\G532F_dump_write_ by_vendor_Samsung_G532FXXU1AQG2.zip
eMMC switching to ROM1
Writing partition...
Error writing at address: 000000000000 , error: -8, DATA SND CRC Error ... Retry #1
Done writing partition. Write speed: 498.46 KB/s

All done time: [00:01:13:150]

Setting frequence to 21 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221322.extcsd
EMMC Init completed.

Opening file: GRANDPPLTE_CIS_SER.pit

Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34

The size of the last section has been updated

BL_G532FXXU1AQC2_CL10340273_QB12918482_REV00_user_ low_ship_MULTI_CERT.tar
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

Setting frequence to 14 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2279 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221337.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 284.74 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 508.76 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 42.44 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 507.67 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 511.38 KB/s

All done time: [00:00:23:775]

Setting frequence to 14 Mhz
CMD Pullup Level: 1691 mV
CMD Active Level: 2258 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221406.extcsd
EMMC Init completed.

Get firmware version

Firmware info not found

Setting frequence to 14 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 2258 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221459.extcsd
EMMC Init completed.

Filename: H8G4u_C297941E_20180910_210935.extcsd

Writing BootConfig ...
Reg: 179 Value: 0x48
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Done

All done

Setting frequence to 14 Mhz
CMD Pullup Level: 1691 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221515.extcsd
EMMC Init completed.

Get firmware version

Firmware info not found

Setting frequence to 14 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 2258 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221523.extcsd
EMMC Init completed.

Filename: H8G4u_C297941E_20180910_210935.extcsd

Repairing ExtCsd ...
Successfully

Setting frequence to 14 Mhz
CMD Pullup Level: 1691 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221613.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 284.16 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 508.75 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 43.61 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 505.90 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 511.24 KB/s

All done time: [00:00:23:694]

Setting frequence to 14 Mhz
CMD Pullup Level: 1691 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221642.extcsd
EMMC Init completed.

Get firmware version

Firmware info not found

BL_G532FXWU1AQB5_CL10802954_QB12732196_REV00_user_ low_ship_MULTI_CERT.tar
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

Setting frequence to 14 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221729.extcsd
EMMC Init completed.

Opening file: GRANDPPLTE_CIS_SER.pit

Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34

The size of the last section has been updated

BL_G532FXWU1AQB5_CL10802954_QB12732196_REV00_user_ low_ship_MULTI_CERT.tar
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

AP_G532FXWU1AQB5_CL10802954_QB12732196_REV00_user_ low_ship_MULTI_CERT.tar
The list of files in the firmware:
boot.img
recovery.img
system.img
secro.img
userdata.img

CP_G532FXXU1AQB3_CL9364647_QB12616083_REV00_user_l ow_ship_MULTI_CERT.tar
The list of files in the firmware:
md1rom.img
md1dsp.img

CSC_XFV_G532FXFV1AQC1_CL10802954_QB12882653_REV00_ user_low_ship_MULTI_CERT.tar
The list of files in the firmware:
grandpplte_cis_ser.pit
cache.img
hidden.img

Setting frequence to 14 Mhz
CMD Pullup Level: 1691 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_221755.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: secro.img
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin
Unpacking file: recovery.img
Unpacking file: boot.img
Unpacking file: md1rom.img
Unpacking file: md1dsp.img
Unpacking file: system.img
Unpacking file: cache.img
Unpacking file: hidden.img
Unpacking file: userdata.img

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 282.33 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 488.70 KB/s
Partition name: SECRO
Filename: secro.img , Offset: 000001400000 , filesize: 135424 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 486.27 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 40.79 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 471.16 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 489.32 KB/s
Partition name: RECOVERY
Filename: recovery.img , Offset: 000005800000 , filesize: 11553040 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 512.25 KB/s
Partition name: BOOT
Filename: boot.img , Offset: 000006800000 , filesize: 9963792 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 510.88 KB/s
Partition name: MD1IMG
Filename: md1rom.img , Offset: 000007800000 , filesize: 10510848 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 511.02 KB/s
Partition name: MD1DSP
Filename: md1dsp.img , Offset: 000009800000 , filesize: 1417728 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 500.92 KB/s
Partition name: SYSTEM
Filename: system.img , Offset: 00000C000000 , filesize: 3040662224 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 3371
Done writing partition. Write speed: 514.14 KB/s
Partition name: CACHE
Filename: cache.img , Offset: 0000CC800000 , filesize: 37650816 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 22
Done writing partition. Write speed: 512.42 KB/s
Partition name: HIDDEN
Filename: hidden.img , Offset: 0000E5800000 , filesize: 52531472 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 15
Done writing partition. Write speed: 508.44 KB/s
Partition name: USERDATA
Filename: userdata.img , Offset: 0000E9400000 , filesize: 128176800 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 40
Done writing partition. Write speed: 512.39 KB/s

Partition EFS : formatting as EXT4. Please wait ...
Formatting completed

All done time: [01:52:36:750]

Setting frequence to 14 Mhz
CMD Pullup Level: 1722 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180911_001241.extcsd
EMMC Init completed.

Get firmware version


Brand = samsung
Manufacturer = samsung
Model = SM-G532F
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532FXWU1AQB5
Firmware date = Tue Feb 28 13:24:33 KST 2017
  Reply With Quote
Old 09-11-2018, 10:04   #153 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 42
Posts: 681
Member: 13148
Status: Offline
Thanks Meter: 679
Quote:
Originally Posted by -=P.F.U=- View Post
Get firmware version
Firmware info not found

Error: This is not a firmware package: G532F_dump_write_by_vendor_Samsung_G532FXXU1AQG2.z ip

Setting frequence to 21 Mhz
CMD Pullup Level: 1711 mV
CMD Active Level: 2268 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_C297941E_20180910_220816.extcsd
EMMC Init completed.

Operation: Write Dump

The size has been corrected for the file size

Writing to: ROM1 , start: 0x000000000000 , size: 0x000002376220
Input file: C:\Users\Bismillah\Desktop\g532f\G532F_dump_write_ by_vendor_Samsung_G532FXXU1AQG2.zip
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 505.07 KB/s

All done time: [00:01:12:197]
zip - is archive.
You must unpack zip files

How much can I assume you have a hadware problem
  Reply With Quote
Old 09-11-2018, 10:15   #154 (permalink)
Freak Poster
 
Join Date: Mar 2018
Location: Future....
Posts: 117
Member: 2825953
Status: Offline
Thanks Meter: 41
Quote:
Originally Posted by layder View Post
zip - is archive.
You must unpack zip files

How much can I assume you have a hadware problem


you said it's H/W problem ?

after i flashed this firmware phone get dead the phone was FRP lock.


BL_G532FXWU1APJ1_CL9364647_QB11085301_REV00_user_l ow_ship_MULTI_CERT

AP_G532FXWU1APJ1_CL9364647_QB11085301_REV00_user_l ow_ship_MULTI_CERT

CP_G532FXXU1APJ1_CL9364647_QB11085301_REV00_user_l ow_ship_MULTI_CERT

CSC_OJV_G532FOJV1APJ2_CL9414734_QB11114703_REV00_u ser_low_ship_MULTI_CERT
  Reply With Quote
Old 09-11-2018, 19:36   #155 (permalink)
Freak Poster
 
Join Date: Mar 2018
Location: Future....
Posts: 117
Member: 2825953
Status: Offline
Thanks Meter: 41
finally dead boot repair done


with this small file sm-g532f dead boot repair


Code:
eMMC_tool Suite  ver. 1.4.9.0 (release date: 12.12.2017)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 2022
EasyJTAG Box Serial = 06010014FC294D61
Card Serial = AA34-B7FF
EasyJTAG Box Firmware = 1.62

Changelog:

12.12.2017 (ver 1.4.9.0)
   Fix:   Bugs that have been found through your crash report
   Fix:   RandomVerify function
   Fix:   Creation of GPT for Samsung (write by vendor)
   Fix:   Failed to mount large Fat partitions (explorer)
   Fix:   Extraction from contact2.db (explorer)
   Fix:   Error in the "build.prop" parser
   Fix:   CID Parser
   Add:  Support for EasyJtag Plus Box
   Add:  Path for TempDir and InitialDir (option in settings)
   Add:  Unpack Lenovo QSB (utilities)
   Add:  Selecting a PIT file from CSC (write by vendor Samsung)
   Add:  Detect for encrypted dumps from GPG Box
   Add:  Detect for FullDiskEncryption Partition (explorer)
   Add:  LinearVerify of the Partition (read by vendor)
   Add:  Information base about emmc compatibility (thanks to phonemicrodb)
   Add:  Resizing the window (for small screen resolutions)
   Add:  Converting large partitions in SparseImage when reading by vendor (option in settings)
   Add:  Mounting SparseImage (explorer)
   Add:  Automatic backup of the EFS partition for Samsung (read by vendor)
   Add:  Formatting of EFS partition for Samsung on request (write by vendor)

Setting frequence to 21 Mhz
CMD Pullup Level: 1763 mV
CMD Active Level: 2279 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_182931.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Model = SM-G532F
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532FXWU1AQG4
Firmware date = Tue Jul 11 21:19:42 KST 2017

Setting frequence to 21 Mhz
CMD Pullup Level: 1763 mV
CMD Active Level: 2279 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_183019.extcsd
EMMC Init completed.

Operation: Write all eMMC Regions at once

Writing BootConfig ...
Reg: 179  Value: 0x48
Reg: 177  Value: 0x00
Reg: 162  Value: 0x01
Done

Writing to: ROM2 , start: 0x000000000000 , size: 0x000000400000
Filename: EMMC_QN16BB_ROM2_000000000000_000000400000.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 223.46 KB/s

Writing to: ROM3 , start: 0x000000000000 , size: 0x000000400000
Filename: EMMC_QN16BB_ROM3_000000000000_000000400000.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 223.35 KB/s

Writing to: ROM1 , start: 0x000000000000 , size: 0x00000C000000
Filename: EMMC_QN16BB_ROM1_000000000000_00000C000000.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 689.89 KB/s

All done   time: [00:05:24:901]

Setting frequence to 21 Mhz
CMD Pullup Level: 1773 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_183744.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Model = SM-G532F
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532FXWU1AQG4
Firmware date = Tue Jul 11 21:19:42 KST 2017

Setting frequence to 21 Mhz
CMD Pullup Level: 1763 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_184640.extcsd
EMMC Init completed.

Opening file: GRANDPPLTE_CIS_SER.pit

Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34

The size of the last section has been updated

BL_G532FXXU1AQC2_CL10340273_QB12918482_REV00_user_low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

Setting frequence to 21 Mhz
CMD Pullup Level: 1763 mV
CMD Active Level: 2310 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_184653.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 181.32 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 610.59 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 8.57 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 541.37 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 679.72 KB/s

All done   time: [00:00:29:945]

Setting frequence to 21 Mhz
CMD Pullup Level: 1773 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_184741.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Model = SM-G532F
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532FXWU1AQG4
Firmware date = Tue Jul 11 21:19:42 KST 2017

Setting frequence to 21 Mhz
CMD Pullup Level: 1773 mV
CMD Active Level: 2310 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_185005.extcsd
EMMC Init completed.

Writing eMMC Register ...
Reg: 179  Value: 0x48
Reg: 177  Value: 0x00
Reg: 162  Value: 0x01
Successfully

Setting frequence to 21 Mhz
CMD Pullup Level: 1773 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_185017.extcsd
EMMC Init completed.

Operation: Write all eMMC Regions at once

Writing BootConfig ...
Reg: 179  Value: 0x48
Reg: 177  Value: 0x00
Reg: 162  Value: 0x01
Done

Writing to: ROM2 , start: 0x000000000000 , size: 0x000000400000
Filename: EMMC_QN16BB_ROM2_000000000000_000000400000.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 223.83 KB/s

Writing to: ROM3 , start: 0x000000000000 , size: 0x000000400000
Filename: EMMC_QN16BB_ROM3_000000000000_000000400000.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 221.86 KB/s

Writing to: ROM1 , start: 0x000000000000 , size: 0x00000C000000
Filename: EMMC_QN16BB_ROM1_000000000000_00000C000000.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 683.81 KB/s

All done   time: [00:05:27:435]

Setting frequence to 21 Mhz
CMD Pullup Level: 1763 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_185838.extcsd
EMMC Init completed.

Opening file: H8G4u_samsung.pit

Pit: H8G4u_samsung.pit
Entry count: 31

The size of the last section has been updated

Setting frequence to 21 Mhz
CMD Pullup Level: 1773 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_185848.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Partition name: BOOTLOADER_ROM2
Filename: bootloader_rom2.bin , Offset: 000000000000 , filesize: 4194304 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 222.98 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 2097152 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 696.90 KB/s
Partition name: EFUSE
Filename: efuse.bin , Offset: 000001B80000 , filesize: 524288 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 693.98 KB/s
Partition name: TEE1
Filename: tee1.bin , Offset: 000001C00000 , filesize: 6291456 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 694.83 KB/s
Partition name: PARAM
Filename: PARAM.bin , Offset: 000005000000 , filesize: 8388608 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 695.33 KB/s

All done   time: [00:01:08:882]

Setting frequence to 21 Mhz
CMD Pullup Level: 1773 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_190004.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Model = SM-G532F
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532FXWU1AQG4
Firmware date = Tue Jul 11 21:19:42 KST 2017

Setting frequence to 21 Mhz
CMD Pullup Level: 1763 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C297941E3596
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G4u , EMMC NAME (HEX): 483847347500 , S/N: C297941E , rev. 0x01
   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Backup saved: H8G4u_C297941E_20180911_190337.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Model = SM-G532F
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532FXWU1AQG4
Firmware date = Tue Jul 11 21:19:42 KST 2017



  Reply With Quote
The Following 2 Users Say Thank You to -=P.F.U=- For This Useful Post:
Old 09-11-2018, 22:46   #156 (permalink)
Product Supporter
 
Join Date: Jun 2002
Location: Belarus
Age: 42
Posts: 681
Member: 13148
Status: Offline
Thanks Meter: 679
Quote:
Originally Posted by -=P.F.U=- View Post
you said it's H/W problem ?

after i flashed this firmware phone get dead the phone was FRP lock.
What version of software you use? 1.4.9.0 ?

Last edited by layder; 09-12-2018 at 01:21.
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
Old 09-13-2018, 22:03   #157 (permalink)
Freak Poster
 
Join Date: Jan 2011
Posts: 168
Member: 1505853
Status: Offline
Thanks Meter: 13
I have same problem dead after write combination COMBINATION_OXE_FA60_G532GDXU1AQJ1. boot repair success but still dead,not come download mode. how to success boot repair? tell me plzz
  Reply With Quote
Old 09-13-2018, 23:30   #158 (permalink)
Moderator
 
...:::::NP™:::::...'s Avatar
 
Join Date: Nov 2009
Location: BD ⇌ ZA
Age: 36
Posts: 9,469
Member: 1162626
Status: Offline
Sonork: 100.1591727 QQ:2337938173
Thanks Meter: 9,305
Just follow this method, sm-g532f dead boot repair create your security area / partition backup,

Then erase eMMC, write full firmware released by any date, that's not a big matter.

Just Write by Samsung Vendor full firmware PIT, BL, AP, CP, CSC files, restore security backup data, your IMEI and network will be restored without any problems.

Your phone will be OK with Download mode, when you remove the JIG connection soldering wire, must remove that's wire very carefully, especially CLK wire connection it's very sensitive.

If there is something wrong with the short circuit "CLK", Your phone can not come in download mode, but with all the information shown by JTAG device when you did direct ISP connection with eMMC.

Test by me !!!
__________________
Use Search Button to get Instant Result | Follow Forum Rules
Avoid Spams in the forum to prevent ban your account.



Br,
Palash Ahammad
  Reply With Quote
The Following User Says Thank You to ...:::::NP™:::::... For This Useful Post:
Old 09-23-2018, 19:27   #159 (permalink)
Junior Member
 
Join Date: Aug 2007
Posts: 8
Member: 568465
Status: Offline
Thanks Meter: 0
G532g dead

HELLO TEAM, PLZ HELP
got a SM G532G dead device by flashed wrong firmware.
I tried write by vendor with many BL versions
BL_G532GDXU1AQA4
BL_G532GDXU1APJ7
BL_G532GDDU1APK9
but the phone doesn't boot up. show's this error"Check BOOT_PARTITION_EN for the selected vendor"
  Reply With Quote
Old 09-23-2018, 19:34   #160 (permalink)
Freak Poster
 
K-B MOBILE's Avatar
 
Join Date: May 2016
Location: GSM-Forum
Posts: 424
Member: 2574306
Status: Offline
Thanks Meter: 228
Donate money to this user
Now What Condition of your Phone..?
Phone Detect in Pc Chek in Device manger i think its Dead now you can repair it With any Jtag Box.....
  Reply With Quote
Old 09-25-2018, 02:34   #161 (permalink)
No Life Poster
 
farukpdm's Avatar
 
Join Date: Oct 2010
Location: DHAKA Mobile
Posts: 1,219
Member: 1417131
Status: Offline
Sonork: 100.1625249
Thanks Meter: 795
I have file for your phone
It will be 100% working
Quote:
Originally Posted by saki|pam View Post
HELLO TEAM, PLZ HELP
got a SM G532G dead device by flashed wrong firmware.
I tried write by vendor with many BL versions
BL_G532GDXU1AQA4
BL_G532GDXU1APJ7
BL_G532GDDU1APK9
but the phone doesn't boot up. show's this error"Check BOOT_PARTITION_EN for the selected vendor"
Sent from my Redmi 4X using Tapatalk
  Reply With Quote
Old 11-03-2018, 18:38   #162 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: Venezuela-Falcon
Posts: 284
Member: 2074524
Status: Offline
Sonork: 100.1627435
Thanks Meter: 68
Smile

Quote:
Originally Posted by ...:::::NP™:::::... View Post
@ All forum members

Those who have had dead boot problems, just download this firmware G532FXWU1AQB5_G532FXFV1AQC1_XFV_6.0.1

Write the [BL File] ''BL_G532FXWU1AQB5_CL10802954_QB12732196_REV00_use r_low_ship_MULTI_CERT'' file with JTAG box, hopefully you will be get your phone again download mode.

Some phones was dead by the latest version firmware but my recommended firmware was revitalized.
What Firmware Version to use on the G532M 16GB model I only see the G532F
  Reply With Quote
Old 11-03-2018, 19:44   #163 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: Venezuela-Falcon
Posts: 284
Member: 2074524
Status: Offline
Sonork: 100.1627435
Thanks Meter: 68
HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 2072 mV
CMD Active Level: 2433 mV
EMMC Device Information :
EMMC CID: 150100513331364242006849E0B53514
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: Q316BB , HEX: 513331364242 , S/N: 6849E0B5 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q316BB_6849E0B5_20181102_073643.extcsd
EMMC Init completed.

Get firmware version


Too many errors. Enabling ResetBox mode

Brand = samsung
Manufacturer = samsung
Model = SM-G532M
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532MUMU1APK4
Firmware date = Tue Nov 15 20:02:21 KST 2016
  Reply With Quote
Old 12-01-2018, 14:20   #164 (permalink)
Freak Poster
 
Join Date: Dec 2013
Posts: 417
Member: 2077370
Status: Offline
Sonork: 100.1616788
Thanks Meter: 224
Samsung g532f dead boot repair done

Samsung g532f dead boot repair done

Setting frequence to 21 Mhz
CMD Pullup Level: 1670 mV
CMD Active Level: 1732 mV
EMMC Device Information :
EMMC CID: 90014A483847347592013773E09545A4
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 3773E095 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_3773E095_20181201_154150.extcsd
EMMC Init completed.

Opening file: GRANDPPLTE_CIS_SER.pit

Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34

The size of the last section has been updated

BL_G532FXXU1ARI2_CL14461696_QB19947720_REV00_user_ low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

Setting frequence to 21 Mhz
CMD Pullup Level: 1670 mV
CMD Active Level: 1722 mV
EMMC Device Information :
EMMC CID: 90014A483847347592013773E09545A4
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 3773E095 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_3773E095_20181201_154201.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0001D1FFBE00
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 313.57 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 490.20 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 50.03 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 872.96 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 907.99 KB/s
  Reply With Quote
The Following User Says Thank You to skgrxl For This Useful Post:
Old 01-06-2019, 15:08   #165 (permalink)
Freak Poster
 
Join Date: Jul 2013
Location: CAIRO.EGYPT
Posts: 134
Member: 1981679
Status: Offline
Thanks Meter: 74
Samsung g532f boot repair done


https://drive.google.com/open?id=14q...6Ts7tEAIkjH3AX

https://drive.google.com/open?id=1In...cTL6FF2550yNHo


ROM2 FILE :
https://drive.google.com/open?id=1Na...oD03oeT9GAwYws
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:11.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.73825 seconds with 8 queries

SEO by vBSEO