sm-g532g dead boot eror

[lifegood8]

Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 1800 mV
Box S/N: , ,FW Ver.: 01.60
CMD Pullup Level:1691 mV
CMD Active Level:1742 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 90014A483847347592010B3814DB74B4
EMMC CSD : D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 07/2017 Rev.0x1
EMMC NAME: H8G4u , S/N: *********
EMMC NAME (HEX): 48384734752000
Can't init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!
Done.

[blang]

Originally Posted by lifegood8

Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 1800 mV
Box S/N: , ,FW Ver.: 01.60
CMD Pullup Level:1691 mV
CMD Active Level:1742 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 90014A483847347592010B3814DB74B4
EMMC CSD : D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 07/2017 Rev.0x1
EMMC NAME: H8G4u , S/N: *********
EMMC NAME (HEX): 48384734752000
Can't init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!
Done.

check data like like software say you.

also you can check this thread with video: http://forum.gsmhosting.com/vbb/f672...-jtag-2275401/