GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus


Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
 
LinkBack Thread Tools Display Modes
Old 07-31-2018, 13:38   #1 (permalink)
Insane Poster
 
Join Date: Apr 2016
Posts: 80
Member: 2566585
Status: Offline
Sonork: 100.1673331
Thanks Meter: 5
Unhappy Sm-j250f dead boot problem.


hi
i have sm-j250f for dead boot repair custumer say to me phone dead on flasing.

i try to repair with bl+pit 5 difrent frimwaer all prosess done but phone not power on.
i write full bekup from working phone all prosess done but phone not power on
i change also cpu config but not done . if any budy solve this plz reply.


Setting frequence to 21 Mhz
CMD Pullup Level: 2010 mV
CMD Active Level: 2310 mV
EMMC Device Information :
EMMC CID: 150100514536364D4200B130D0B5151C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: QE66MB , HEX: 514536364D42 , S/N: B130D0B5 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 1/2018
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QE66MB_B130D0B5_20180731_150959.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Model = SM-J250F
Phone platform = msm8937
CPU Abi = armeabi-v7a
Android release = 7.1.1
Firmware version = NMF26X.J250FXXU1AQL5
Firmware date = Thu Dec 21 18:17:52 KST 2017
  Reply With Quote
The Following 2 Users Say Thank You to helpdesk1 For This Useful Post:
Old 07-31-2018, 18:37   #2 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 47
Posts: 3,187
Member: 13148
Status: Offline
Thanks Meter: 2,948
Quote:
Originally Posted by helpdesk1 View Post
hi
i have sm-j250f for dead boot repair custumer say to me phone dead on flasing.

i try to repair with bl+pit 5 difrent frimwaer all prosess done but phone not power on.
i write full bekup from working phone all prosess done but phone not power on
i change also cpu config but not done . if any budy solve this plz reply.
try to use eMMC Tool Shuite 1.5.0.
and post full log with write files

eMMC info is not a log
  Reply With Quote
Old 08-02-2018, 09:00   #3 (permalink)
Freak Poster
 
lifegood8's Avatar
 
Join Date: Apr 2008
Location: gsmworld
Posts: 450
Member: 757297
Status: Offline
Thanks Meter: 36
Unhappy Sm-j250f dead boot problam.

HI
SM-J250F DEAD BOOT REPAIR ALL PROSESS DONE BUT STIL PROBLAM NOT SOLVE.


Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0003AB3FBE00
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: sbl1.mbn
Unpacking file: aboot.mbn
Unpacking file: rpm.mbn
Unpacking file: tz.mbn
Unpacking file: devcfg.mbn
Unpacking file: sec.dat
Unpacking file: keymaster.mbn
Unpacking file: cmnlib.mbn
Unpacking file: lksecapp.mbn
Unpacking file: apdp.mbn
Unpacking file: msadp.mbn
Unpacking file: boot.img
Unpacking file: recovery.img
Unpacking file: persist.img.ext4
Unpacking file: adspso.bin
Unpacking file: modem.bin
Unpacking file: non-hlos.bin
Unpacking file: system.img.ext4
Unpacking file: cache.img.ext4
Unpacking file: hidden.img.ext4
Unpacking file: userdata.img.ext4

Partition name: SBL1
Filename: sbl1.mbn , Offset: 000000400000 , filesize: 380100 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 476.81 KB/s
Partition name: ABOOT
Filename: aboot.mbn , Offset: 000000510000 , filesize: 1195364 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 921.23 KB/s
Partition name: RPM
Filename: rpm.mbn , Offset: 000000710000 , filesize: 218656 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 812.75 KB/s
Partition name: TZ
Filename: tz.mbn , Offset: 000000790000 , filesize: 1572352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 926.29 KB/s
Partition name: DEVCFG
Filename: devcfg.mbn , Offset: 000000A10000 , filesize: 94428 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 719.09 KB/s
Partition name: SEC
Filename: sec.dat , Offset: 000000D50000 , filesize: 692 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 74.31 KB/s
Partition name: KEYMASTER
Filename: keymaster.mbn , Offset: 000000D54000 , filesize: 259032 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 868.26 KB/s
Partition name: CMNLIB
Filename: cmnlib.mbn , Offset: 000000DD4000 , filesize: 238496 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 838.79 KB/s
Partition name: LKSECAPP
Filename: lksecapp.mbn , Offset: 000000E54000 , filesize: 270944 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 859.26 KB/s
Partition name: APDP
Filename: apdp.mbn , Offset: 000000ED4000 , filesize: 46272 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 603.73 KB/s
Partition name: MSADP
Filename: msadp.mbn , Offset: 000000F14000 , filesize: 46272 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 684.47 KB/s
Partition name: BOOT
Filename: boot.img , Offset: 000002E00000 , filesize: 14289168 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 936.35 KB/s
Partition name: RECOVERY
Filename: recovery.img , Offset: 000004E00000 , filesize: 15868176 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 937.49 KB/s
Partition name: PERSIST
Filename: persist.img.ext4 , Offset: 000008301000 , filesize: 4743292 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 8
Done writing partition. Write speed: 933.50 KB/s
Partition name: DSP
Filename: adspso.bin , Offset: 00000ADE9000 , filesize: 16777216 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 938.91 KB/s
Partition name: MODEM
Filename: modem.bin , Offset: 00000BDE9000 , filesize: 63216384 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 939.74 KB/s
Partition name: APNHLOS
Filename: non-hlos.bin , Offset: 000011980000 , filesize: 25401088 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 936.81 KB/s
Partition name: SYSTEM
Filename: system.img.ext4 , Offset: 000013800000 , filesize: 2873971904 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 4195

Error: Previous operation is not finished yet.

Done writing partition. Write speed: 931.81 KB/s
Partition name: CACHE
Filename: cache.img.ext4 , Offset: 0000E5000000 , filesize: 110289116 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 16
Done writing partition. Write speed: 938.56 KB/s
Partition name: HIDDEN
Filename: hidden.img.ext4 , Offset: 0000F1800000 , filesize: 30503216 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 23
Done writing partition. Write speed: 935.72 KB/s
Partition name: USERDATA
Filename: userdata.img.ext4 , Offset: 0000F5400000 , filesize: 861674848 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 283
Done writing partition. Write speed: 939.41 KB/s

Partition EFS : formatting as EXT4. Please wait ...
Formatting completed

Check BOOT_PARTITION_EN for the selected vendor

All done time: [01:23:26:908]

Setting frequence to 21 Mhz
CMD Pullup Level: 2021 mV
CMD Active Level: 2320 mV
EMMC Device Information :
EMMC CID: 150100514536364D4200B130D0B5151C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: QE66MB , HEX: 514536364D42 , S/N:******* , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 1/2018
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QE66MB_B130D0B5_20180802_104434.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: sbl1, [000000400000 - 000000480000], size: 000000080000 (512. KB)
Partition: sbl1bak, [000000480000 - 000000500000], size: 000000080000 (512. KB)
Partition: ddr, [000000500000 - 000000508000], size: 000000008000 (32.0 KB)
Partition: limits, [000000508000 - 000000510000], size: 000000008000 (32.0 KB)
Partition: aboot, [000000510000 - 000000710000], size: 000000200000 (2.00 MB)
Partition: rpm, [000000710000 - 000000790000], size: 000000080000 (512. KB)
Partition: tz, [000000790000 - 000000990000], size: 000000200000 (2.00 MB)
Partition: hyp, [000000990000 - 000000A10000], size: 000000080000 (512. KB)
Partition: devcfg, [000000A10000 - 000000A50000], size: 000000040000 (256. KB)
Partition: fsg, [000000A50000 - 000000D50000], size: 000000300000 (3.00 MB)
Partition: sec, [000000D50000 - 000000D54000], size: 000000004000 (16.0 KB)
Partition: keymaster, [000000D54000 - 000000DD4000], size: 000000080000 (512. KB)
Partition: cmnlib, [000000DD4000 - 000000E14000], size: 000000040000 (256. KB)
Partition: cmnlib64, [000000E14000 - 000000E54000], size: 000000040000 (256. KB)
Partition: lksecapp, [000000E54000 - 000000ED4000], size: 000000080000 (512. KB)
Partition: apdp, [000000ED4000 - 000000F14000], size: 000000040000 (256. KB)
Partition: msadp, [000000F14000 - 000000F54000], size: 000000040000 (256. KB)
Partition: pad, [000000F54000 - 000001000000], size: 0000000AC000 (688. KB)
Partition: modemst1, [000001000000 - 000001300000], size: 000000300000 (3.00 MB)
Partition: modemst2, [000001300000 - 000001600000], size: 000000300000 (3.00 MB)
Partition: param, [000001600000 - 000002000000], size: 000000A00000 (10.0 MB)
Partition: efs, [000002000000 - 000002E00000], size: 000000E00000 (14.0 MB)
Partition: boot, [000002E00000 - 000004E00000], size: 000002000000 (32.0 MB)
Partition: recovery, [000004E00000 - 000006E00000], size: 000002000000 (32.0 MB)
Partition: bota, [000006E00000 - 000007500000], size: 000000700000 (7.00 MB)
Partition: fota, [000007500000 - 000007A00400], size: 000000500400 (5.00 MB)
Partition: backup, [000007A00400 - 000007FFF000], size: 0000005FEC00 (6.00 MB)
Partition: fsc, [000007FFF000 - 0000082FF000], size: 000000300000 (3.00 MB)
Partition: ssd, [0000082FF000 - 000008301000], size: 000000002000 (8.00 KB)
Partition: persist, [000008301000 - 00000A301000], size: 000002000000 (32.0 MB)
Partition: persistent, [00000A301000 - 00000A381000], size: 000000080000 (512. KB)
Partition: steady, [00000A381000 - 00000A781000], size: 000000400000 (4.00 MB)
Partition: keystore, [00000A781000 - 00000A801000], size: 000000080000 (512. KB)
Partition: config, [00000A801000 - 00000A809000], size: 000000008000 (32.0 KB)
Partition: mota, [00000A809000 - 00000A889000], size: 000000080000 (512. KB)
Partition: dpo, [00000A889000 - 00000A8C9000], size: 000000040000 (256. KB)
Partition: mdtp, [00000A8C9000 - 00000A8D9000], size: 000000010000 (64.0 KB)
Partition: dip, [00000A8D9000 - 00000A9D9000], size: 000000100000 (1.00 MB)
Partition: oem, [00000A9D9000 - 00000A9E9000], size: 000000010000 (64.0 KB)
Partition: mcfg, [00000A9E9000 - 00000ADE9000], size: 000000400000 (4.00 MB)
Partition: dsp, [00000ADE9000 - 00000BDE9000], size: 000001000000 (16.0 MB)
Partition: modem, [00000BDE9000 - 000011980000], size: 000005B97000 (91.5 MB)
Partition: apnhlos, [000011980000 - 000013580000], size: 000001C00000 (28.0 MB)
Partition: reserved2, [000013580000 - 000013800000], size: 000000280000 (2.50 MB)
Partition: system, [000013800000 - 0000E5000000], size: 0000D1800000 (3.27 GB)
Partition: cache, [0000E5000000 - 0000F1800000], size: 00000C800000 (200. MB)
Partition: hidden, [0000F1800000 - 0000F5400000], size: 000003C00000 (60.0 MB)
Partition: userdata, [0000F5400000 - 0003AB3FBE00], size: 0002B5FFBE00 (10.8 GB)
GPT header successfully parsed

Get firmware version

Brand = samsung
Manufacturer = samsung
Model = SM-J250F
Phone platform = msm8937
CPU Abi = armeabi-v7a
Android release = 7.1.1
Firmware version = NMF26X.J250FXXS2ARE1
Firmware date = Thu May 24 17:01:21 KST 2018
  Reply With Quote
Old 08-02-2018, 09:23   #4 (permalink)
Freak Poster
 
lifegood8's Avatar
 
Join Date: Apr 2008
Location: gsmworld
Posts: 450
Member: 757297
Status: Offline
Thanks Meter: 36
Unhappy j250f dead boot done but not power on

I ALSO CHANE CPU CONFIG BUT STILL SAME.

Compression is ON
Z3X EasyJtag Software ver. 3.0.0.0
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0C0C17118AA3D768, ,FW Ver.: 01.63
CMD Pullup Level:2031 mV
CMD Active Level:2310 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536364D4200B130D0B5151C
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 01/2018 Rev.0x0
eMMC NAME: QE66MB , S/N: *************
eMMC NAME (HEX): 514536364D42
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: QE66MB_2972766389_20180802_1120.extcsd
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D5A000 sectors 14.7 GiB
Soft (Partitioned) Disk/Image size: 1D59FBC sectors 14.7 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30777310
Found Data areas (firmware parts) count is: 48
Partition info successfully found
---------------------------------------------
P0 (SBL1) [0x400000 0x80000] Size: 512.0KB
P1 (SBL1BAK) [0x480000 0x80000] Size: 512.0KB
P2 (DDR) [0x500000 0x8000] Size: 32.0KB
P3 (LIMITS) [0x508000 0x8000] Size: 32.0KB
P4 (ABOOT) [0x510000 0x200000] Size: 2.0MB
P5 (RPM) [0x710000 0x80000] Size: 512.0KB
P6 (TZ) [0x790000 0x200000] Size: 2.0MB
P7 (HYP) [0x990000 0x80000] Size: 512.0KB
P8 (DEVCFG) [0xa10000 0x40000] Size: 256.0KB
P9 (FSG) [0xa50000 0x300000] Size: 3.0MB
P10 (SEC) [0xd50000 0x4000] Size: 16.0KB
P11 (KEYMASTER) [0xd54000 0x80000] Size: 512.0KB
P12 (CMNLIB) [0xdd4000 0x40000] Size: 256.0KB
P13 (CMNLIB64) [0xe14000 0x40000] Size: 256.0KB
P14 (LKSECAPP) [0xe54000 0x80000] Size: 512.0KB
P15 (APDP) [0xed4000 0x40000] Size: 256.0KB
P16 (MSADP) [0xf14000 0x40000] Size: 256.0KB
P17 (PAD) [0xf54000 0xac000] Size: 688.0KB
P18 (MODEMST1) [0x1000000 0x300000] Size: 3.0MB
P19 (MODEMST2) [0x1300000 0x300000] Size: 3.0MB
P20 (PARAM) [0x1600000 0xa00000] Size: 10.0MB
P21 (EFS) [0x2000000 0xe00000] Size: 14.0MB
P22 (BOOT) [0x2e00000 0x2000000] Size: 32.0MB
P23 (RECOVERY) [0x4e00000 0x2000000] Size: 32.0MB
P24 (BOTA) [0x6e00000 0x700000] Size: 7.0MB
P25 (FOTA) [0x7500000 0x500400] Size: 5.0MB
P26 (BACKUP) [0x7a00400 0x5fec00] Size: 5.995MB
P27 (FSC) [0x7fff000 0x300000] Size: 3.0MB
P28 (SSD) [0x82ff000 0x2000] Size: 8.0KB
P29 (PERSIST) [0x8301000 0x2000000] Size: 32.0MB
P30 (PERSISTENT) [0xa301000 0x80000] Size: 512.0KB
P31 (STEADY) [0xa381000 0x400000] Size: 4.0MB
P32 (KEYSTORE) [0xa781000 0x80000] Size: 512.0KB
P33 (CONFIG) [0xa801000 0x8000] Size: 32.0KB
P34 (MOTA) [0xa809000 0x80000] Size: 512.0KB
P35 (DPO) [0xa889000 0x40000] Size: 256.0KB
P36 (MDTP) [0xa8c9000 0x10000] Size: 64.0KB
P37 (DIP) [0xa8d9000 0x100000] Size: 1.0MB
P38 (OEM) [0xa9d9000 0x10000] Size: 64.0KB
P39 (MCFG) [0xa9e9000 0x400000] Size: 4.0MB
P40 (DSP) [0xade9000 0x1000000] Size: 16.0MB
P41 (MODEM) [0xbde9000 0x5b97000] Size: 91.589MB
P42 (APNHLOS) [0x11980000 0x1c00000] Size: 28.0MB
P43 (RESERVED2) [0x13580000 0x280000] Size: 2.500MB
P44 (SYSTEM) [0x13800000 0xd1800000] Size: 3.273GB
P45 (CACHE) [0xe5000000 0xc800000] Size: 200.0MB
P46 (HIDDEN) [0xf1800000 0x3c00000] Size: 60.0MB
P47 (USERDATA) [0xf5400000 0x2b5ffbe00] Size: 10.842GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0013800000 (3.273GB)
Build ID: NMF26X
Display Build ID: NMF26X.J250FXXS2ARE1
Release ID: 7.1.1
Device Model: SM-J250F
Product ID: j2y18lte
Device Name: j2y18ltejx
Architecture ABI: armeabi-v7a
Device manufacturer: samsung
Device Platform: msm8937
Build Description: j2y18ltejx-user 7.1.1 NMF26X J250FXXS2ARE1 release-keys
Samsung CPU: MSM8937
---------------------------------------------
Done.
  Reply With Quote
Old 08-02-2018, 16:32   #5 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 47
Posts: 3,187
Member: 13148
Status: Offline
Thanks Meter: 2,948
probably, boot is ok, and you have another problem
  Reply With Quote
Old 08-02-2018, 22:16   #6 (permalink)
Freak Poster
 
lifegood8's Avatar
 
Join Date: Apr 2008
Location: gsmworld
Posts: 450
Member: 757297
Status: Offline
Thanks Meter: 36
Unhappy

Quote:
Originally Posted by layder View Post
probably, boot is ok, and you have another problem
phone dead on flasing.
  Reply With Quote
The Following User Says Thank You to lifegood8 For This Useful Post:
Old 08-03-2018, 10:11   #7 (permalink)
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 47
Posts: 3,187
Member: 13148
Status: Offline
Thanks Meter: 2,948
Quote:
Originally Posted by lifegood8 View Post
phone dead on flasing.
wait few days for 1.5.2 version or try to write bin files from support
Samsung_SM-J250F-DS-7.1.1_emmc_direct_dump_1GB.rar
(without efs/modemst1/modemst2/fsg)

Always backup efs/modemst1/modemst2/fsg partitions from phone
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
Old 11-28-2018, 15:58   #8 (permalink)
No Life Poster
 
Join Date: Mar 2013
Location: Nepal
Age: 41
Posts: 728
Member: 1906979
Status: Offline
Sonork: 100.1681049
Thanks Meter: 162
Donate money to this user
i had try many times, emmc 5.1 devices all are not supported by easyjtag. i have my own threads also about this problam
  Reply With Quote
Old 11-28-2018, 16:26   #9 (permalink)
No Life Poster
 
durgesh4rbl's Avatar
 
Join Date: Feb 2011
Location: LALGANJ RAEBARELI
Posts: 518
Member: 1525102
Status: Offline
Sonork: 100.1626123
Thanks Meter: 159
Donate money to this user
c900f boot repair

Quote:
Originally Posted by KE6SOLTI View Post
i had try many times, emmc 5.1 devices all are not supported by easyjtag. i have my own threads also about this problam
same with c900f boot repair problem
  Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 20:30.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.25093 seconds with 8 queries

SEO by vBSEO