GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   Step by step manual how to repair KMVTU000LM-B503 in pictures. (https://forum.gsmhosting.com/vbb/f672/step-step-manual-how-repair-kmvtu000lm-b503-pictures-1935679/)

dyracell 11-06-2017 13:49

Nice Post i will be save this

dvdxx 11-09-2017 11:11

Kingston 08EMCP08-EL3CV100 eMMC Pinout

josh88 11-18-2017 14:04

thank bro keep the good work

usernome 01-09-2018 22:47

Code:

Compression is ON
Z3X EasyJtag Software ver. 2.9.0.0
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: xxxxxxxxxx, ,FW Ver.: 01.62
CMD Pullup Level:3227 mV
CMD Active Level:3248 mV
Box IO Level:3300 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.

What about this error ?

I removed EMMC .

chmsc_ELX 09-19-2018 10:21

in direct emmc Moorc is this tp need to do a jumper on the emmc or moorc have built in pinout for tp connection?

Gsmbizz 08-03-2021 16:01

Emmc Now Okay after use Tp Method..:)


All times are GMT +1. The time now is 14:11.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.07650 seconds with 6 queries

SEO by vBSEO