GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus
Reload this Page Step by step manual how to repair KMVTU000LM-B503 in pictures.
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
Page 2 of 6 1 2 345 Last »
 
LinkBack Thread Tools Display Modes
Old 04-08-2015, 06:03   #16 (permalink)
No Life Poster
 
Join Date: Apr 2006
Location: APPLE i Center
Age: 39
Posts: 1,751
Member: 264667
Status: Offline
Sonork: 100.105892
Thanks Meter: 481

so i think not 2 easy work...we will remove emmc chip to work with TP????
  Reply With Quote
The Following User Says Thank You to ..::AppleLinks::.. For This Useful Post:
Old 04-08-2015, 10:21   #17 (permalink)
Freak Poster
 
Join Date: Feb 2009
Posts: 151
Member: 961313
Status: Offline
Sonork: 100.1625300
Thanks Meter: 35
Quote:
z3x easyjtag software ver. 1.9.0.5
loading emmc addon firmware... Io: 2800 mv
box s/n: , ,fw ver.: 01.52
cmd pullup level:2155 mv
cmd active level:2670 mv
emmc device information
emmc cid : 1501003030303030305620110726589c
emmc csd : 902701320f5903fff6dbffef8a404022
emmc manufacturer id: 0015 , oem id: 0100
emmc date: 05/2005 rev.0x56
emmc name: 000000 , s/n: 537986854
emmc name (hex): 30303030303000
emmc rom1 (main user data) capacity: 16384 mb
emmc rom2 (boot partition 1) capacity: 512 kb
emmc rom3 (boot partition 2) capacity: 512 kb
emmc rpmb (replay protected memory block) capacity: 128 kb
emmc permanent write protection: No
emmc temporary write protection: No
extended csd rev 1.5 (mmc 4.41)
boot configuration [partition_config: 0x00] no boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150303_1018.extcsd
done.

Running:samsung: Emmc firmware update...
Confirmed emmc part number: Kmvtu000lm
z3x easyjtag software ver. 1.9.0.5
loading emmc addon firmware... Io: 2800 mv
box s/n: , ,fw ver.: 01.52
cmd pullup level:2165 mv
cmd active level:2670 mv
setup firmware normal update mode, wait 2..30 sec...
Success!
Sending emmc firmware...
Success!
Verifying emmc firmware...
Success!
Flashing emmc firmware...
Success!
Repairing emmc cid...
Can't init device, reason: Ocr ready timeout error [emmc dead]
done.
what about this error ?
  Reply With Quote
The Following User Says Thank You to Dr.Dekra For This Useful Post:
Old 04-08-2015, 10:50   #18 (permalink)
Insane Poster
 
Join Date: Nov 2007
Location: Bandung, west java
Age: 44
Posts: 73
Member: 624775
Status: Offline
Thanks Meter: 18
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0B01400EE56989F0, ,FW Ver.: 01.52
CMD Pullup Level:3269 mV
CMD Active Level:3135 mV
Can't init device, Reason: OCR Ready Timeout Error [EMMC DEAD]
Done.

Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0B01400EE56989F0, ,FW Ver.: 01.52
CMD Pullup Level:3279 mV
CMD Active Level:3135 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150303_1640.extcsd
Done.

Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0B01400EE56989F0, ,FW Ver.: 01.52
CMD Pullup Level:3279 mV
CMD Active Level:3124 mV
Setup firmware normal update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Can't init device, Reason: CMD Timeout Error
Done.

Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0B01400EE56989F0, ,FW Ver.: 01.52
CMD Pullup Level:3279 mV
CMD Active Level:3135 mV
Setup firmware normal update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect eMMC power lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.




Nice update...
  Reply With Quote
The Following User Says Thank You to kococos For This Useful Post:
Old 04-08-2015, 10:57   #19 (permalink)
Product Supporter
 
Join Date: May 2011
Posts: 286
Member: 1569669
Status: Offline
Thanks Meter: 257
Quote:
Originally Posted by Dr.Dekra View Post
what about this error ?
"setup firmware normal update mode, wait 2..30 sec...
Success!
Sending emmc firmware...
Success!
Verifying emmc firmware...
Success!
Flashing emmc firmware...
Success!
Repairing emmc cid...
Can't init device, reason: Ocr ready timeout error [emmc dead]
done."

Hi,

"This solution can repair 90% dead KMVTU000LM-B503 eMMC"

This error means that eMMC can not be repaired only with
firmware update. Probably eMMC internal block mapping area damaged
or eMMC hw fail.

Best Regards
Last edited by vikboston; 04-08-2015 at 11:09.
  Reply With Quote
The Following 3 Users Say Thank You to vikboston For This Useful Post:
Show/Hide list of the thanked
Old 04-08-2015, 11:11   #20 (permalink)
Freak Poster
 
Join Date: Feb 2009
Posts: 151
Member: 961313
Status: Offline
Sonork: 100.1625300
Thanks Meter: 35
Quote:
Originally Posted by dr.dekra View Post
what about this error ?
my problem solved
Quote:
can't init device, reason: Ocr ready timeout error [emmc dead]
done.

Running:samsung: Emmc firmware update...
Can't init device, reason: Ocr ready timeout error [emmc dead]
done.

Z3x easyjtag software ver. 1.9.0.5
loading emmc addon firmware... Io: 3300 mv
box s/n: 07ffd00b044beaae, ,fw ver.: 01.52
cmd pullup level:2155 mv
cmd active level:2681 mv
emmc device information
emmc cid : 1501003030303030305620110726589c
emmc csd : 902701320f5903fff6dbffef8a404022
emmc manufacturer id: 0015 , oem id: 0100
emmc date: 05/2005 rev.0x56
emmc name: 000000 , s/n: 537986854
emmc name (hex): 30303030303000
emmc rom1 (main user data) capacity: 16384 mb
emmc rom2 (boot partition 1) capacity: 512 kb
emmc rom3 (boot partition 2) capacity: 512 kb
emmc rpmb (replay protected memory block) capacity: 128 kb
emmc permanent write protection: No
emmc temporary write protection: No
extended csd rev 1.5 (mmc 4.41)
boot configuration [partition_config: 0x00] no boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150303_1105.extcsd
done.

Running:samsung: Emmc firmware update...
Confirmed emmc part number: Kmvtu000lm-b503
z3x easyjtag software ver. 1.9.0.5
loading emmc addon firmware... Io: 3300 mv
box s/n: 07ffd00b044beaae, ,fw ver.: 01.52
cmd pullup level:2186 mv
cmd active level:3176 mv
setup firmware normal update mode, wait 2..30 sec...
Success!
Sending emmc firmware...
Success!
Verifying emmc firmware...
Verifying emmc firmware fail: No error
done.

Running:samsung: Emmc firmware update...
Confirmed emmc part number: Kmvtu000lm-b503
z3x easyjtag software ver. 1.9.0.5
loading emmc addon firmware... Io: 3300 mv
box s/n: 07ffd00b044beaae, ,fw ver.: 01.52
cmd pullup level:2175 mv
cmd active level:3196 mv
setup firmware normal update mode, wait 2..30 sec...
Success!
Sending emmc firmware...
Success!
Verifying emmc firmware...
Success!
Flashing emmc firmware...
Success!
Repairing emmc cid...
Success!
Emmc firmware is updated now!
Please reconnect emmc power lines before next operation!
Please don't forget to repair extcsd from backup!
Please don't forget to configure boot sizes!
Done.

Z3x easyjtag software ver. 1.9.0.5
loading emmc addon firmware... Io: 3300 mv
box s/n: 07ffd00b044beaae, ,fw ver.: 01.52
cmd pullup level:2175 mv
cmd active level:2805 mv
emmc device information
emmc cid : 15010056545530304dfc3d39868641fa
emmc csd : D02701320f5903fff6dbffff8e40406c
emmc manufacturer id: 0015 , oem id: 0100
emmc date: 04/2014 rev.0xfc
emmc name: Vtu00m , s/n: 1027180166
emmc name (hex): 56545530304d00
emmc rom1 (main user data) capacity: 15028 mb
emmc rom2 (boot partition 1) capacity: 2048 kb
emmc rom3 (boot partition 2) capacity: 2048 kb
emmc rpmb (replay protected memory block) capacity: 128 kb
emmc permanent write protection: No
emmc temporary write protection: No
extended csd rev 1.6 (mmc 4.5)
boot configuration [partition_config: 0x00] no boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , partition config [179]: 0x00.
Backup saved: Vtu00m_1027180166_20150303_1108.extcsd
done.

i just select 3.3volt in emmc voltage

thanks for this real solution
  Reply With Quote
The Following User Says Thank You to Dr.Dekra For This Useful Post:
Old 04-08-2015, 11:33   #21 (permalink)
No Life Poster
 
Edocomsel's Avatar
 
Join Date: Aug 2004
Location: E.A.P & E.A.S
Posts: 679
Member: 76239
Status: Offline
Sonork: 100.1584414
Thanks Meter: 210
Donate money to this user
Please support this type of EMMC:

Code:
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0606171217xxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2691 mV
CMD Active Level:2763 mV
Can't init device, Reason: OCR Ready Timeout Error [EMMC DEAD] 
Done.

Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0606171217xxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2681 mV
CMD Active Level:2732 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C

EMMC CSD : 902701320F5903FFF6DBFFEF8A404022

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005  Rev.0x56
EMMC NAME: 000000 , S/N:  537986854
EMMC NAME (HEX): 30303030303000 
EMMC ROM1 (Main User Data)   Capacity: 4095 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
  Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150303_1714.extcsd
Searching for partition tables...
Read Pages Failed, Reason: CMD Timeout Error 
Partitioning not detected...
Done.


Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0606171217xxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:2072 mV
CMD Active Level:2155 mV
eMMC Device Information
EMMC CID : 15010053355530304D0203438A74C0F0
EMMC CSD : D02701320F5903FFF6DBFFE18E404028
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2013 Rev.0x2
EMMC NAME: S5U00M , S/N: 54758004
EMMC NAME (HEX): 53355530304D00 
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: S5U00M_ 54758004_20150303_1729.extcsd
Done.

Running:SAMSUNG: eMMC firmware update...
EMMC NAME: S5U00M
This eMMC is not supported yet!
To force eMMC Firmware Update:
* Press and keep 'Shift' key
* Start 'SAMSUNG: eMMC Firmware Update'
* Type and press 'Confirm' eMMC Part Number
eMMC can be fully damaged, if type non-original Part Number!
  Reply With Quote
Old 04-09-2015, 19:13   #22 (permalink)
Freak Poster
 
Join Date: Feb 2009
Posts: 151
Member: 961313
Status: Offline
Sonork: 100.1625300
Thanks Meter: 35
you are the best team ...maybe it's 100%

Code:
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 07FFD00B044BEAAE, ,FW Ver.: 01.52
CMD Pullup Level:2175 mV
CMD Active Level:2815 mV
Can't init device, Reason: OCR Ready Timeout Error [EMMC DEAD] 
Done.

Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 07FFD00B044BEAAE, ,FW Ver.: 01.52
CMD Pullup Level:2165 mV
CMD Active Level:2670 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000 
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150304_1905.extcsd
Done.

Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 07FFD00B044BEAAE, ,FW Ver.: 01.52
CMD Pullup Level:2186 mV
CMD Active Level:3207 mV
Setup firmware normal update mode, wait 2..30 sec... 
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now! 
Please reconnect eMMC power lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.

Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 07FFD00B044BEAAE, ,FW Ver.: 01.52
CMD Pullup Level:2175 mV
CMD Active Level:2805 mV
eMMC Device Information
EMMC CID : 15010056545530304DFC3D39868641FA
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xFC
EMMC NAME: VTU00M , S/N: 1027180166
EMMC NAME (HEX): 56545530304D00 
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: VTU00M_1027180166_20150304_1908.extcsd
Done.
secand phone is ok
this vtu from n7100
  Reply With Quote
The Following User Says Thank You to Dr.Dekra For This Useful Post:
Old 04-10-2015, 06:26   #23 (permalink)
No Life Poster
 
mobifone's Avatar
 
Join Date: Sep 2008
Posts: 822
Member: 860880
Status: Offline
Thanks Meter: 83
kindly can somebody post video tutorial from test point to software repair step by step .
  Reply With Quote
The Following User Says Thank You to mobifone For This Useful Post:
Old 04-10-2015, 12:55   #24 (permalink)
Junior Member
 
Join Date: Mar 2011
Posts: 8
Member: 1528719
Status: Offline
Thanks Meter: 0
Klm8g2ff3b-b001 not suport .....
  Reply With Quote
Old 04-17-2015, 13:25   #25 (permalink)
Freak Poster
 
DJ Morgan's Avatar
 
Join Date: Feb 2005
Location: Poland
Age: 37
Posts: 197
Member: 120827
Status: Offline
Thanks Meter: 130
Done - probably first phone in Poland repaired without removing eMMC chip
Just use very thin rounded injection needle.

Code:
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 1300300A9980D735, ,FW Ver.: 01.52
CMD Pullup Level:2083 mV
CMD Active Level:2536 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000 
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150305_1352.extcsd
Done.

Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 1300300A9980D735, ,FW Ver.: 01.52
CMD Pullup Level:2072 mV
CMD Active Level:2547 mV
Setup firmware normal update mode, wait 2..30 sec... 
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now! 
Please reconnect eMMC power lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
  Reply With Quote
Old 04-21-2015, 10:13   #26 (permalink)
No Life Poster
 
Join Date: May 2006
Age: 44
Posts: 1,267
Member: 278546
Status: Offline
Thanks Meter: 145
yahooo. i am from india repair done 2 s3 and one note 2 , with out remove emmc . thanks to blang .now must needed box z3x jtag for every one.
  Reply With Quote
Old 04-21-2015, 15:55   #27 (permalink)
Insane Poster
 
Join Date: Apr 2004
Location: Kuwait
Age: 47
Posts: 72
Member: 63751
Status: Offline
Thanks Meter: 9
To Mr. Blang,

i have a question for you after we finish reviving our dead emmc.

" eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!"

how do you configure BOOT sizes on the following eMMC?

-- S3
--Note II
etc.....

can you please show us or teach us the correct values and how do we perform it using our easy jtag program.

thank you very much and i am waiting for your reply.
  Reply With Quote
Old 04-22-2015, 07:33   #28 (permalink)
No Life Poster
 
Join Date: May 2006
Age: 44
Posts: 1,267
Member: 278546
Status: Offline
Thanks Meter: 145
Quote:
Originally Posted by rathbone View Post
To Mr. Blang,

i have a question for you after we finish reviving our dead emmc.

" eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!"

how do you configure BOOT sizes on the following eMMC?

-- S3
--Note II
etc.....

can you please show us or teach us the correct values and how do we perform it using our easy jtag program.

thank you very much and i am waiting for your reply.
see there . special i9300/n7100 boot config button . just press that tab to config boot .
  Reply With Quote
The Following User Says Thank You to yalamandareddy For This Useful Post:
Old 04-22-2015, 08:16   #29 (permalink)
No Life Poster
 
unlock in nepal's Avatar
 
Join Date: Nov 2011
Location: Student
Posts: 1,225
Member: 1686564
Status: Offline
Sonork: PM me
Thanks Meter: 157
Quote:
Originally Posted by blang View Post
*****SCRENSHOTS KMVTU000LM REPAIR*****

DEAD EMMC:



Connect TP to GND:




LOG OF EMMC AFTER TP to GND:



REMOVE eMMC TP from GND ( Break Wire )
SELECT FIRMWARE UPDATE:



CONFIRM EMMC PART NUMBER:



FIRMWARE UPDATE DONE:



RECONNECT EMMC AND IDENTIFY



TRY TO READ SOMETHING:

Fore This work we nead to remove emmc ic or any spacel tp point in pcb
  Reply With Quote
Old 04-22-2015, 11:09   #30 (permalink)
No Life Poster
 
Join Date: May 2006
Age: 44
Posts: 1,267
Member: 278546
Status: Offline
Thanks Meter: 145
bro . make sharp needle and connect to pin .
  Reply With Quote
The Following User Says Thank You to yalamandareddy For This Useful Post:
Reply
Page 2 of 6 1 2 345 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 15:35.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.33720 seconds with 9 queries

SEO by vBSEO