Step by step manual how to repair KMVTU000LM-B503 in pictures. - Page 4 - GSM-Forum

ayipsn · 11-03-2015, 11:36

nice info and big job.............

Jacques2 · 12-19-2015, 17:50

Does anyone know the Test Point location on this SanDisk eMMC chip? I am getting the Bad eMMC error message. I want to reset the chip and download the device contents for my customer.
I have an LG 730
Prior to disassembly, the device would not boot. Dead.

sbycell · 06-12-2016, 10:34

Quote:

Originally Posted by rajeshchiyyan

Here IS the MAGIC TP

Howw do to TP this emmc whitout remove the Emmc,,,pleasee share it broooo????,,,,

don_paolo · 06-19-2016, 04:00

Anyone work out how to not wipe the eMMC with firmware update.? If so please telll...??

koclok2 · 08-03-2016, 20:35

please help me
pinout samsung SM-G316HU/DS

khanyunus · 08-11-2016, 17:37

before repair it was dead

JTAG Connection is not supported for this device
Z3X EasyJtag Software ver. 2.2.0.2
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.55CMD Pullup Level:2010 mV
CMD Active Level:2475 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 000000_ 537986854_20160811_1922.extcsd
Done.⁠⁠⁠⁠

after repair

Z3X EasyJtag Software ver. 2.2.0.2
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.55CMD Pullup Level:2547 mV
CMD Active Level:3124 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: VTU000_ 538150534_20160811_1931.extcsd
Done.

world best z3x team

sunnyhoney323 · 08-12-2016, 13:15

nice information and zex jtag price?????

Ahir paresh · 01-18-2017, 12:15

very good i need some video !!!! Thanks.

h.azaraa · 01-23-2017, 15:37

Is it just a wire attached to the ic????

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-03-2015, 11:36	#46 (permalink)
ayipsn Junior Member Join Date: Oct 2014 Posts: 11 Member: 2267757 Status: Offline Thanks Meter: 0	nice info and big job.............

06-19-2016, 04:00	#49 (permalink)
don_paolo Crazy Poster Join Date: Jul 2009 Posts: 53 Member: 1065227 Status: Offline Thanks Meter: 9	Anyone work out how to not wipe the eMMC with firmware update.? If so please telll...??

08-03-2016, 20:35	#50 (permalink)
koclok2 Junior Member Join Date: Apr 2015 Posts: 13 Member: 2372463 Status: Offline Sonork: koclok Thanks Meter: 6	please help me pinout samsung SM-G316HU/DS

08-11-2016, 17:37	#51 (permalink)
khanyunus Freak Poster Join Date: May 2016 Location: Saudi Arab Dammam Posts: 102 Member: 2574123 Status: Offline Sonork: 100.1652460 Thanks Meter: 7	before repair it was dead JTAG Connection is not supported for this device Z3X EasyJtag Software ver. 2.2.0.2 Loading eMMC Addon Firmware... IO: 3300 mV Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.55CMD Pullup Level:2010 mV CMD Active Level:2475 mV Box IO Level:3300 mV CLK Rate:14000 khz HiPower mode is off! ---------- eMMC Device Information ----------EMMC CID : 1501003030303030305620110726589C EMMC CSD : 902701320F5903FFF6DBFFEF8A404022 EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 05/2005 Rev.0x56 EMMC NAME: 000000 , S/N: 537986854 EMMC NAME (HEX): 30303030303000 EMMC ROM1 (Main User Data) Capacity: 16384 MB EMMC ROM2 (Boot Partition 1) Capacity: 512 kB EMMC ROM3 (Boot Partition 2) Capacity: 512 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.5 (MMC 4.41) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x03 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: 000000_ 537986854_20160811_1922.extcsd Done.⁠⁠⁠⁠ after repair Z3X EasyJtag Software ver. 2.2.0.2 Loading eMMC Addon Firmware... IO: 3300 mV Box S/N: 1616100C7FD4B36E, ,FW Ver.: 01.55CMD Pullup Level:2547 mV CMD Active Level:3124 mV Box IO Level:3300 mV CLK Rate:14000 khz HiPower mode is off! ---------- eMMC Device Information ---------- EMMC CID : 1501005654553030300C20138686416E EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 04/2014 Rev.0xC EMMC NAME: VTU000 , S/N: 538150534 EMMC NAME (HEX): 56545530303000 EMMC ROM1 (Main User Data) Capacity: 15028 MB EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.6 (MMC 4.5) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: VTU000_ 538150534_20160811_1931.extcsd Done. world best z3x team

08-12-2016, 13:15	#52 (permalink)
sunnyhoney323 Junior Member Join Date: Apr 2014 Posts: 18 Member: 2176617 Status: Offline Thanks Meter: 0	nice information and zex jtag price?????

01-18-2017, 12:15	#53 (permalink)
Ahir paresh Junior Member Join Date: Mar 2014 Location: Gujrat Age: 22 Posts: 25 Member: 2148096 Status: Offline Sonork: 100.1674885 Thanks Meter: 0	very good i need some video !!!! Thanks.

01-23-2017, 15:37	#54 (permalink)
h.azaraa Insane Poster Join Date: Apr 2014 Posts: 80 Member: 2177146 Status: Offline Thanks Meter: 1	Is it just a wire attached to the ic????