SUCCESS Lumia 520 WPLock EMMC Error "Unable to Find a Bootable option"

[s4s_s4me]

nokia 520 after write protection remove phone can,t flash anyone can help?


Waiting for phone in DLOAD ...
PARAM : 08/01/0600/90
DLOAD : PBL_DloadVER2.0
Switching to FlashProgrammer...
FlashProgrammer init Done!
Sub Init Ok, eMMC , 0x00003C00
Secure Mode init Ok
[Program Mode] : INIT FAILED : eMMC not answer!
Reasons :
1. If TestPoint used - DON'T hold it after device connected!
2. SBL or something else BLOCK write (Due wrong repair) JTAG/eMMC connection required!
In other case - eMMC fault or some short, check HW!
Error while repairing

[piyush_sharma]

laxmi sir plz help me i have lumia 520 with lock code i try hard reset flashing everything but not success always set same condition what to do sir plz help

[belal1987]

Lumia 525 RM-998 After Flash By ATF When Show Big Logo (Nokia)
But Not Flash And Set Dead (No power,No Vaebretion)
How To Repair By EASYJTAG PLZ HELP_ PLZ>>>>>>>>>>>>>>>>>>>>>>>

[black emmc]

Originally Posted by madgoeslim

For better result:
-backup extcsd and 512Mb of user partition (ROM 1)
-go to advanced tab, do factory format & reset
-go to advanced tab, do emmc firmware upgrade
-close your eyes n pray
-after success upgrade the emmc, restore extcsd, and write back your user partition (ROM1)backup
- flash with any nokia tool you have...
now your lumia will free from wp bug

Follow this step, work 100%.. thank's for sharing

[friens12375]

Lumia 620 unable to find bootable option....plz any one give me the solution step by step..i have only atf gold..
Plz give step by step complite solution

[Moolly]

is there anyone in Harare Zimbabwe who can fix my lumia 520 with the same problem of error unable to find bootable option press any key to shut down

[sidramobilecare]

Originally Posted by madgoeslim

Today I got Lumia 520 "ERROR : Unable to find a bootable option. press any key to shutdown".
This ia common trouble when upgrading WP 8.0 to 8.1, and this is
very easy to Fix, by EasyJTAG
While other box failed to detect "ivalid blablabla", Easy Jtag show the power

Here's step by step how to:


1.) Solder only 4 wire : CMD, CLK, DAT0, and GND



2.) Open Easyjtag Emmc tool, n connet usb directly to pcb as power of Vcc&vccq



3. Click Emmc Tool, set eMMC Voltage to : 3,3v
Detect eMMC card, you will see in log "Emmc Permanent Write Protection : YES"
This is the problem, just click on Advanced Opt, select "SAMSUNG : remove write protection" and execute by Custom Operation -->



4. Detect Emmc Card again to see the result, the trouble maker is remove Now , ..



5. Assemble phone, and flash normally with any box u have.
And, just it, you just revive your phone back to live...




Don't forget to Thanks to EasyJTAG

Repaired as per your method but still same error

Z3X EasyJtag Software ver. 2.2.0.1
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 12120516E09E5053, ,FW Ver.: 01.55CMD Pullup Level:567 mV
CMD Active Level:1907 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------EMMC CID : 1501004D38473259430017AE4B608084
EMMC CSD : D02701320F5903FFF6DBFFEF96404062
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2013 Rev.0x0
EMMC NAME: M8G2YC , S/N: 397298528
EMMC NAME (HEX): 4D384732594300
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 512 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: M8G2YC_ 397298528_20160715_2216.extcsd
Done.

Running:SAMSUNG: Remove Write Protection...Z3X EasyJtag Software ver. 2.2.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:567 mVCMD Active Level:1907 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
This eMMC is not Write Protected!Done.

still shows error "Unable to Find a Bootable option"

any other solution experts ?????

[ghulamabbasi]

Thank you bro it's work 100% perfectly.

[ghulamabbasi]

After that here is log with best infinity

Connect phone on selected interface...

Core : v2.23 , WP10x FlashEngine : v2.4

FFU : RM914_3058.50000.1425.0001_RETAIL_im_mea3_319_01_4 44164_prd_signed.ffu
Checking FFU file, wait...
FFU Revision ID : 2.0
FFU Model ID : Nokia.MSM8227.P6036
FFU RootKeyHash : F771E62AF89994064F77CD3BC16829503BDF9A3D
FFU Languages : Arabic , Dutch (Netherlands) , English (UK) , English , Filipino (Philippines) , Finnish , French , German , Greek , Hindi (India) , Hungarian , Indonesian , Italian , Korean , Malay (Malaysia) , Persian (Iran) , Polish , Portuguese(Portugal) , Russian , sr-latn-rs , Chinese , Spanish , Turkish ,
FFU ChipSectors : 15155200
FFU Header : 0x000C0000
FFU Payload : 0x57AA0000
FFU FastVerify : Ok

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version : 1.15
Protocol Implementation : 1.28
=== Phone Initial info :
Phone RMxxx ID : RM-914
Phone Model ID : Nokia.MSM8227.P6036.1.2
Phone Model PC : 05
Phone IMEI : 357287
=== eMMC info :
eMMC Vendor : Samsung
eMMC CID : 0015
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : F771E62AF89994064F77CD3BC16829503BDF9A3D
=== Other info :
SD present : False

Full Check skipped , will be checked by ImageSignature


Battery Level : 71%
RPMB Provision Status Code : 0x0101
Device RAM size : 512 MiB
Device not have ATRP
Backup to RAM Ok!

FFU : RM914_3058.50000.1425.0001_RETAIL_im_mea3_319_01_4 44164_prd_signed.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted
Perform Data Partition Erase
Erase done
Sending FFU Payload Data...
Finishing flashing

Flashing done!
Green Light

Image Sent, processing PostFlash
FinalConfig : abnormal status, error code : 0xFFFF0000
Make Factory Set : Ok
Restore RAMBkp : Ok
Update NVI from Image
Ok , NVI will be updated on first boot!
PostFlash Finished

Total flash time : 00:03:58

Rebooting

Connect phone on selected interface...

[kanu123]

nokia lumia 630 emmc pinout wantes pls help

[Gsmbizz]

thanks its worksi have done my first phone with easy jtag

[cellncare]

Originally Posted by madgoeslim

Today I got Lumia 520 "ERROR : Unable to find a bootable option. press any key to shutdown".
This ia common trouble when upgrading WP 8.0 to 8.1, and this is
very easy to Fix, by EasyJTAG
While other box failed to detect "ivalid blablabla", Easy Jtag show the power

Here's step by step how to:


1.) Solder only 4 wire : CMD, CLK, DAT0, and GND



2.) Open Easyjtag Emmc tool, n connet usb directly to pcb as power of Vcc&vccq



3. Click Emmc Tool, set eMMC Voltage to : 3,3v
Detect eMMC card, you will see in log "Emmc Permanent Write Protection : YES"
This is the problem, just click on Advanced Opt, select "SAMSUNG : remove write protection" and execute by Custom Operation -->



4. Detect Emmc Card again to see the result, the trouble maker is remove Now , ..



5. Assemble phone, and flash normally with any box u have.
And, just it, you just revive your phone back to live...




Don't forget to Thanks to EasyJTAG

Worked for me thanks

[sunny-gsm]

Hi Mr. Madgoeslim sir
my lumia 520 was in ERROR : Unable to find a bootable option. press any key to shutdown" problem.After removing write protection it became dead.Then I do reset and format emmc without takng 512mb backup(as I new with z3x Jtag,I have not a great knowleadge still now).

Then I got a 512mb backup of any ather lumia 520 and write it.My set then alive but it shows Airplane mode alwas and while taking info with atf box it shows simlock loked.

Please Help........................................

[mkulumba]

just flash with infinity best update nvi

[sauravsaka]

when i flash my nokia lumia 520 rm-914 it says JTAG efuse ****n and RDC not found. i dont have box to flash please help me