Warning: Health report is very BAD
 

hi easy team
some one can help me to solve this problm on samsung j200h
Warning: Health report is very BAD
im traying many time but same error

Changelog:

06.08.2018 (ver 1520)
Fix: Bugs that have been found through your crash report
Fix: Writing ROM2 for Samsung (Write by vendor)
Fix: Freezing the program on a RandomVerify
Add: Folder for saving to Explorer (in settings)
Add: Extract from storevol from emmc (explorer)
Add: Automatic repair of damaged storevol when extracting (Explorer)
Add: Adding MountPoints for partitions (efs, userdata) when formatting
Add: Checking for an empty EFS before backup (Read by Vendor Samsung)


Setting frequence to 14 Mhz
CMD Pullup Level: 2361 mV
CMD Active Level: 2743 mV
EMMC Device Information :
EMMC CID: 90014A483847347421012275201373E6
EMMC CSD: D07F01320F5903FFFFFFFFEF8A400012
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4t , HEX: 483847347400 , S/N: 22752013 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 7/2016
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4t_22752013_20181107_112607extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x06 50% - 60% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x03 Urgent

Get firmware version
Firmware info not found



thanks in advance

do hardware partition some times work

can you give steps to do this
im new in jtag

this forum help u but language different try to google translate


Îñîáåííîñòè ñîçäàíèÿ ðàçäåëà GP1

What is you problem?

At log are written:
the chip is worn by 50-60%

Want the report to be better? Change the chip to a new one.

so there is no solution to fix it with easy ??

can you make an old person young? you have solution for this?

memory cells wear out and they have a number of write cycles after which their operation is practically impossible

I Have Same Problem How To Work http://sellphonereview.com/wp-conten...4/Untitled.jpg

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100414A544434520037E0F0E055D5
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: AJTD4R , HEX: 414A54443452 , S/N: 37E0F0E0 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 5/2018
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 2 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: AJTD4R_37E0F0E0_20210430_221348.extcsd
EMMC Init completed.

Warning: Health report is very BAD

Device Life Time Estimation (MLC) [269]: 0x08 70% - 80% device life time used
Device Life Time Estimation (SLC) [268]: 0x08 70% - 80% device life time used
Pre EOL information [267]: 0x01 Normal

Scanning soft partitions
Partition table not found

Get firmware version
Firmware info not found

Warning: Health Report is Very BAD Solution by Easy JTAG
 

Warning: Health Report is Very BAD Solution by Easy JTAG try this procedure with your phone.