GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Easy-Jtag / Easy-Jtag Plus

Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus.

Reply
 
LinkBack Thread Tools Display Modes
Old 08-26-2013, 03:13   #1 (permalink)
Junior Member
 
Join Date: Feb 2007
Location: Perm
Posts: 29
Member: 452521
Status: Offline
Thanks Meter: 3
Wildfire S Easy Repair? [New RCP inside]


Hi !
I want to restore Wildfire S. BBut getting an error:

Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00AD:00BC 'NAND 512MB 1.8V 16-bit (Hynix)' found
NAND geometry: Blocks:00001000, Page size:2048 bytes , Block size:64 pages
Restoring MIBIB
couldn't open MIBIB.bin
failed to open 'MIBIB.bin' for read access

Tried on two phones, one of them known-good. In what could be the reason?
  Reply With Quote
Old 08-26-2013, 08:10   #2 (permalink)
Insane Poster
 
Join Date: Dec 2012
Posts: 79
Member: 1859138
Status: Offline
Thanks Meter: 20
I confirm this, repair does not work, I have the same log
  Reply With Quote
Old 08-26-2013, 12:54   #3 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 22,426
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 186,529
Donate money to this user
please post full log. we will test. i have this phone in hands.


WildFire S resurecto V2 file - try this . CLICK

Last edited by blang; 08-26-2013 at 13:11.
  Reply With Quote
Old 08-27-2013, 04:05   #4 (permalink)
Junior Member
 
Join Date: Feb 2007
Location: Perm
Posts: 29
Member: 452521
Status: Offline
Thanks Meter: 3
The second file is the same.
log with the first file:
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.61.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: HTC Wildfire S Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 0E0EFC12FA73B7DD ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00AD:00BC 'NAND 512MB 1.8V 16-bit (Hynix)' found
NAND geometry: Blocks:00001000, Page size:2048 bytes , Block size:64 pages
Restoring MIBIB
couldn't open MIBIB.bin
failed to open 'MIBIB.bin' for read access

The second file:
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.61.1 started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: HTC Wildfire S Config ver.:1.00
I/O Level set to : 2600 mV
Box S/N: 0E0EFC12FA73B7DD ,FW Ver.: 01.47
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00AD:00BC 'NAND 512MB 1.8V 16-bit (Hynix)' found
NAND geometry: Blocks:00001000, Page size:2048 bytes , Block size:64 pages
Restoring MIBIB
couldn't open MIBIB.bin
failed to open 'MIBIB.bin' for read access
  Reply With Quote
Old 08-27-2013, 10:40   #5 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 22,426
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 186,529
Donate money to this user
i will check now again. may be problem becouse used capital characters inside rpc file. In 1-2h i will upload v.1.02 rcp file.
  Reply With Quote
Old 08-28-2013, 13:13   #6 (permalink)
Product Manager
 
blang's Avatar
 
Join Date: Oct 2000
Location: future
Posts: 22,426
Member: 2368
Status: Offline
Sonork: 100.111111
Thanks Meter: 186,529
Donate money to this user
please try new rcp here
  Reply With Quote
Old 08-29-2013, 06:37   #7 (permalink)
Junior Member
 
Join Date: Feb 2007
Location: Perm
Posts: 29
Member: 452521
Status: Offline
Thanks Meter: 3
This file is a good (HTC_WILDFIRE_S_V1.02):

Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x203C10E1 Mfg.: 0x070, Part: 0x03c1, Ver.: 0x2
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:00AD:00BC 'NAND 512MB 1.8V 16-bit (Hynix)' found
NAND geometry: Blocks:00001000, Page size:2048 bytes , Block size:64 pages
Restoring MIBIB
NAND Write OK! Elapsed time: 12.109375s (109.006 KiB/s)
Restoring QCSBL
NAND Write OK! Elapsed time: 4.828125s (109.359 KiB/s)
Restoring OEMSBL1
NAND Write OK! Elapsed time: 7.046875s (112.390 KiB/s)
Restoring OEMSBL2
NAND Write OK! Elapsed time: 7.046875s (112.390 KiB/s)
Restoring HTC
NAND Write OK! Elapsed time: 19.343750s (109.183 KiB/s)
Restoring AMSS
NAND Write OK! Elapsed time: 232.296875s (109.102 KiB/s)
Restoring APPSBL
NAND Write OK! Elapsed time: 7.046875s (112.390 KiB/s)
Restoring MISC_MFG
NAND Write OK! Elapsed time: 2.359375s (111.894 KiB/s)
Restoring WLAN
NAND Write OK! Elapsed time: 2.421875s (109.006 KiB/s)
All Done.
  Reply With Quote
The Following 2 Users Say Thank You to nikitin78 For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 00:06.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.15233 seconds with 8 queries

SEO by vBSEO