writing error
 

sm-j730gm writing error plz help



eMMC_tool Suite ver. 1.5.3.0 (release date: 28.12.2018)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)

Looking for EasyJTAG box...
EasyJTAG API ver. 2201
EasyJTAG Box Serial = 1212FB1C2DD282C2
Card Serial = AAAB1D71
EasyJTAG Box Firmware = 1.63

Changelog:

28.12.2018 (ver 1.5.3.0)
Fix: Bugs that have been found through your crash report
Fix: Scatter file processing (MTK)
Fix: Contact Extractor
Fix: Preloader parser
Fix: FAT partitions mounting
Fix: Minor interface changes
Add: Explorer: Work with Qualcomm HS-USB QDLoader 9008 interface
Add: Reset FRP via Qualcomm HS-USB QDLoader 9008 interface (General - Advanced - Remove FRP)
Add: Remove Android locks via Qualcomm HS-USB QDLoader 9008 interface (General - Advanced - Remove Android Locks)
Add: Auto/Manual loaders select for Qualcom HS-USB QDLoader 9008 interface
Add: Samsung firmware lz4 unpack support (Write by vendor - Samsung)
Add: Import from cm2qlm xml backups (Write by vendor - Qualcomm)
Add: Unpack Bootloader.img archive from Motorola firmware files
Add: Import GP partition parameters from ExtCSD backups (General - eMMC HW Partitions)
Add: Import Boot and RPMB sizes from ExtCSD backups (General - eMMC HW Partitions)
Add: Allow to create a GP with zero size (fix "Error writing at address: 000000000000", fine for Samsung eMMC, and may be destroy SanDisk and other eMMC)
Add: Explorer: Pin and Password decoding (only English and Russian letters)

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1495 mV
Can't init device. Reason: CMD Timeout Error

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1557 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_115907.extcsd
EMMC Init completed.

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 340 mV
CMD Active Level: 1567 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_115920.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Device = j7y17lte
Model = SM-J730GM
Phone platform = exynos5
CPU Abi = armeabi-v7a
Android release = 8.1.0
Firmware version = M1AJQ.J730GMDXU5BRK6
Firmware date = Fri Nov 30 19:33:47 KST 2018

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1546 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_120109.extcsd
EMMC Init completed.

Operation: Reading from eMMC...

Reading from: ROM2 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\Hamza\Desktop\730g\EMMC_CKTM4R_ROM2_00000 0000000_000000400000.bin
eMMC switching to ROM2
Reading partition...
Error reading at address: 000000008000 , error: -206, PORT Read Error ... Retry #1
Error reading at address: 000000318000 , error: -206, PORT Read Error ... Retry #1
Done reading partition. Read speed: 27.80 Kb/s

All done time: [00:02:55:795]

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1557 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_120732.extcsd
EMMC Init completed.

Get firmware version

Brand = samsung
Manufacturer = samsung
Device = j7y17lte
Model = SM-J730GM
Phone platform = exynos5
CPU Abi = armeabi-v7a
Android release = 8.1.0
Firmware version = M1AJQ.J730GMDXU5BRK6
Firmware date = Fri Nov 30 19:33:47 KST 2018

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 340 mV
CMD Active Level: 1567 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_120820.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: BOTA0, [000000400000 - 000000800000], size: 000000400000 (4.00 MB)
Partition: BOTA1, [000000800000 - 000000C00000], size: 000000400000 (4.00 MB)
Partition: EFS, [000000C00000 - 000002000000], size: 000001400000 (20.0 MB)
Partition: CPEFS, [000002000000 - 000002800000], size: 000000800000 (8.00 MB)
Partition: m9kefs1, [000002800000 - 000002C00000], size: 000000400000 (4.00 MB)
Partition: m9kefs2, [000002C00000 - 000003000000], size: 000000400000 (4.00 MB)
Partition: m9kefs3, [000003000000 - 000003400000], size: 000000400000 (4.00 MB)
Partition: CARRIER, [000003400000 - 000003500000], size: 000000100000 (1.00 MB)
Partition: PARAM, [000003500000 - 000003D00000], size: 000000800000 (8.00 MB)
Partition: BOOT, [000003D00000 - 000005D00000], size: 000002000000 (32.0 MB)
Partition: RECOVERY, [000005D00000 - 000008300000], size: 000002600000 (38.0 MB)
Partition: OTA, [000008300000 - 000008B00000], size: 000000800000 (8.00 MB)
Partition: RADIO, [000008B00000 - 00000E300000], size: 000005800000 (88.0 MB)
Partition: TOMBSTONES, [00000E300000 - 00000E400000], size: 000000100000 (1.00 MB)
Partition: PERSISTENT, [00000E400000 - 00000E480000], size: 000000080000 (512. KB)
Partition: STEADY, [00000E480000 - 00000E880000], size: 000000400000 (4.00 MB)
Partition: RESERVED2, [00000E880000 - 00000F000000], size: 000000780000 (7.50 MB)
Partition: SYSTEM, [00000F000000 - 0000CF000000], size: 0000C0000000 (3.00 GB)
Partition: CACHE, [0000CF000000 - 0000DB800000], size: 00000C800000 (200. MB)
Partition: HIDDEN, [0000DB800000 - 0000E1C00000], size: 000006400000 (100. MB)
Partition: CP_DEBUG, [0000E1C00000 - 0000E2100000], size: 000000500000 (5.00 MB)
Partition: NAD_FW, [0000E2100000 - 0000E3500000], size: 000001400000 (20.0 MB)
Partition: NAD_REFER, [0000E3500000 - 0000E3600000], size: 000000100000 (1.00 MB)
Partition: USERDATA, [0000E3600000 - 000E8F200000], size: 000DABC00000 (54.6 GB)
GPT header successfully parsed

Get firmware version

Brand = samsung
Manufacturer = samsung
Device = j7y17lte
Model = SM-J730GM
Phone platform = exynos5
CPU Abi = armeabi-v7a
Android release = 8.1.0
Firmware version = M1AJQ.J730GMDXU5BRK6
Firmware date = Fri Nov 30 19:33:47 KST 2018

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1567 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_121023.extcsd
EMMC Init completed.

Operation: Reading from eMMC...

Reading from: ROM3 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\Hamza\Desktop\730g\EMMC_CKTM4R_ROM3_00000 0000000_000000400000.bin
eMMC switching to ROM3
Reading partition...
Error reading at address: 000000250000 , error: -206, PORT Read Error ... Retry #1
Done reading partition. Read speed: 78.82 Kb/s

All done time: [00:01:42:992]

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1557 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_121905.extcsd
EMMC Init completed.

Opening file: J7Y17LTE_LTN_OPENM.pit

Pit: J7Y17LTE_LTN_OPENM.pit
Entry count: 29

The size of the last section has been updated

BL_J730GMDXU6CSF5_CL16068741_QB24224080_REV00_user _low_ship.tar.md5
The list of files in the firmware:
sboot.bin.lz4
param.bin.lz4
cm.bin.lz4

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1557 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_122107.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Error writing at address: 000000000000 , error: -101 , CARD Ready Timeout Error ... Retry #1
Error writing at address: 000000000000 , error: -101 , CARD Ready Timeout Error ... Retry #2
Error writing at address: 000000000000 , error: -101 , CARD Ready Timeout Error ... Retry #3
Too many errors. Writing has been stopped

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 309 mV
CMD Active Level: 1546 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_122217.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: BOTA0, [000000400000 - 000000800000], size: 000000400000 (4.00 MB)
Partition: BOTA1, [000000800000 - 000000C00000], size: 000000400000 (4.00 MB)
Partition: EFS, [000000C00000 - 000002000000], size: 000001400000 (20.0 MB)
Partition: CPEFS, [000002000000 - 000002800000], size: 000000800000 (8.00 MB)
Partition: m9kefs1, [000002800000 - 000002C00000], size: 000000400000 (4.00 MB)
Partition: m9kefs2, [000002C00000 - 000003000000], size: 000000400000 (4.00 MB)
Partition: m9kefs3, [000003000000 - 000003400000], size: 000000400000 (4.00 MB)
Partition: CARRIER, [000003400000 - 000003500000], size: 000000100000 (1.00 MB)
Partition: PARAM, [000003500000 - 000003D00000], size: 000000800000 (8.00 MB)
Partition: BOOT, [000003D00000 - 000005D00000], size: 000002000000 (32.0 MB)
Partition: RECOVERY, [000005D00000 - 000008300000], size: 000002600000 (38.0 MB)
Partition: OTA, [000008300000 - 000008B00000], size: 000000800000 (8.00 MB)
Partition: RADIO, [000008B00000 - 00000E300000], size: 000005800000 (88.0 MB)
Partition: TOMBSTONES, [00000E300000 - 00000E400000], size: 000000100000 (1.00 MB)
Partition: PERSISTENT, [00000E400000 - 00000E480000], size: 000000080000 (512. KB)
Partition: STEADY, [00000E480000 - 00000E880000], size: 000000400000 (4.00 MB)
Partition: RESERVED2, [00000E880000 - 00000F000000], size: 000000780000 (7.50 MB)
Partition: SYSTEM, [00000F000000 - 0000CF000000], size: 0000C0000000 (3.00 GB)
Partition: CACHE, [0000CF000000 - 0000DB800000], size: 00000C800000 (200. MB)
Partition: HIDDEN, [0000DB800000 - 0000E1C00000], size: 000006400000 (100. MB)
Partition: CP_DEBUG, [0000E1C00000 - 0000E2100000], size: 000000500000 (5.00 MB)
Partition: NAD_FW, [0000E2100000 - 0000E3500000], size: 000001400000 (20.0 MB)
Partition: NAD_REFER, [0000E3500000 - 0000E3600000], size: 000000100000 (1.00 MB)
Partition: USERDATA, [0000E3600000 - 000E8F200000], size: 000DABC00000 (54.6 GB)
GPT header successfully parsed

Get firmware version

Brand = samsung
Manufacturer = samsung
Device = j7y17lte
Model = SM-J730GM
Phone platform = exynos5
CPU Abi = armeabi-v7a
Android release = 8.1.0
Firmware version = M1AJQ.J730GMDXU5BRK6
Firmware date = Fri Nov 30 19:33:47 KST 2018

HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 330 mV
CMD Active Level: 1557 mV
EMMC Device Information :
EMMC CID: 150100434B544D345200A4BAB8BE355C
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: CKTM4R , HEX: 434B544D3452 , S/N: A4BAB8BE , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 59640 MB (000E8F800000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: CKTM4R_A4BAB8BE_20190912_122244.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Error writing at address: 000000000000 , error: -101 , CARD Ready Timeout Error ... Retry #1
Error writing at address: 000000000000 , error: -101 , CARD Ready Timeout Error ... Retry #2
Error writing at address: 000000000000 , error: -101 , CARD Ready Timeout Error ... Retry #3
Too many errors. Writing has been stopped