Dear supporter i successfully connected a sam SM-G316HU but dont know the procedure

[rasheddk]

Dear
supporter i successfully connected an Emmc jig to board SM-G316HU but dont know the procedure


Log:



Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 1850 mV
Box S/N: 0101100*********, ,FW Ver.: 01.60
CMD Pullup Level:1691 mV
CMD Active Level:1773 mV
Box IO Level:1850 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------


EMMC CID : 90014A4834473262110112F3DD04425E

EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2

EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 04/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 317971716
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

---------------------------------------------

Backup saved: H4G2b _ 317971716_20171126_2112.extcsd
Done.

Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1784 mV
Box IO Level:1850 mV
CLK Rate:14000 khz
------------Parsing extCSD------------
=============================================

Extended CSD rev 1.6 (MMC 4.5)

=============================================


Card Supported Command sets [S_CMD_SET: 0x01]

HPI Features [HPI_FEATURE: 0x01]:
implementation based on CMD13

Background operations support [BKOPS_SUPPORT: 0x01]

Max Packet Read Cmd [MAX_PACKED_READS: 0x08]

Max Packet Write Cmd [MAX_PACKED_WRITES: 0x08]

Data TAG support [DATA_TAG_SUPPORT: 0x01]

Data TAG Unit Size [TAG_UNIT_SIZE: 0x00]

Tag Resources Size [TAG_RES_SIZE: 0x06]

Context Management Capabilities [CONTEXT_CAPABILITIES: 0x78]

Large Unit Size [LARGE_UNIT_SIZE_M1: 0x01]

Extended partition attribute support [EXT_SUPPORT: 0x03]

Generic CMD6 Timer [GENERIC_CMD6_TIME: 0xa0]

Power off notification [POWER_OFF_LONG_TIME: 0x50]

Cache Size [CACHE_SIZE] is 512 KiB

Generic CMD6 Timer [GENERIC_CMD6_TIME: 0xa0]

Power off notification [POWER_OFF_LONG_TIME: 0x50]

Cache Size [CACHE_SIZE] is 512 KiB

Background operations status [BKOPS_STATUS: 0x00]

1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x0a]

Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]

Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]

Power class for 200MHz at 3.6V [PWR_CL_200_360: 0x00]

Power class for 200MHz, at 1.95V [PWR_CL_200_195: 0x00]

Minimum Performance for 8bit at 52MHz in DDR mode:

[MIN_PERF_DDR_W_8_52: 0x00]

[MIN_PERF_DDR_R_8_52: 0x00]

TRIM Multiplier [TRIM_MULT: 0x02]

Secure Feature support [SEC_FEATURE_SUPPORT: 0x55]

Boot Information [BOOT_INFO: 0x07]

Device supports alternative boot method

Device supports dual data rate during boot

Device supports high speed timing during boot

Boot partition size [BOOT_SIZE_MULTI: 0x20]

Access size [ACC_SIZE: 0x06]

High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]

High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x02]

Reliable write sector count [REL_WR_SEC_C: 0x01]

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x10]

Sleep current (VCC) [S_C_VCC: 0x07]

Sleep current (VCCQ) [S_C_VCCQ: 0x07]

Sleep/awake timeout [S_A_TIMEOUT: 0x13]

Sector Count [SEC_COUNT: 0x00748000]

Minimum Write Performance for 8bit:

[MIN_PERF_W_8_52: 0x08]

[MIN_PERF_R_8_52: 0x08]

[MIN_PERF_W_8_26_4_52: 0x08]

[MIN_PERF_R_8_26_4_52: 0x08]

Minimum Write Performance for 4bit:

[MIN_PERF_W_4_26: 0x08]

[MIN_PERF_R_4_26: 0x08]

Power classes registers:

[PWR_CL_26_360: 0x00]

[PWR_CL_52_360: 0x00]

[PWR_CL_26_195: 0x00]

[PWR_CL_52_195: 0x00]

Partition switching timing [PARTITION_SWITCH_TIME: 0x01]

Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x05]

I/O Driver Strength [DRIVER_STRENGTH: 0x01]

Card Type [CARD_TYPE: 0x17]

CSD structure version [CSD_STRUCTURE: 0x02]

Command set [CMD_SET: 0x00]

Command set revision [CMD_SET_REV: 0x00]

Power class [POWER_CLASS: 0x00]

High-speed interface timing [HS_TIMING: 0x00]

Erased memory content [ERASED_MEM_CONT: 0x00]

Boot configuration bytes [PARTITION_CONFIG: 0x08]

No access to boot partition

Boot config protection [BOOT_CONFIG_PROT: 0x00]

Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00]

High-density erase group definition [ERASE_GROUP_DEF: 0x00]

Boot write protection status registers [BOOT_WP_STATUS]: 0x00

Boot Area Write protection [BOOT_WP]: 0x10

Power ReadOnly locking: possible

Permanent ReadOnly locking: not possible

Read Only lock status: not locked

User area write protection register [USER_WP]: 0x10

FW configuration [FW_CONFIG]: 0x00

RPMB Size [RPMB_SIZE_MULT]: 0x20

Write reliability setting register [WR_REL_SET]: 0x1f

Write reliability parameter register [WR_REL_PARAM]: 0x05

Enable background operations handshake [BKOPS_EN]: 0x00

H/W reset function [RST_N_FUNCTION]: 0x00

HPI management [HPI_MGMT]: 0x00

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0000e9

Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

General Purpose Partition Size
[GP_SIZE_MULT_4]: 0x000000

[GP_SIZE_MULT_3]: 0x000000

[GP_SIZE_MULT_2]: 0x000000

[GP_SIZE_MULT_1]: 0x000000

Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000

Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000

Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00

Periodic Wake-up [PERIODIC_WAKEUP]: 0x00

Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x01

Native sector size [NATIVE_SECTOR_SIZE]: 0x00

Sector size emulation [USE_NATIVE_SECTOR]: 0x00

Sector size [DATA_SECTOR_SIZE]: 0x00

1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x0a

Class 6 commands control [CLASS_6_CTRL]: 0x00

Number of addressed group to be released[DYNCAP_NEEDED]: 0x00

Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000

Exception events status [EXCEPTION_EVENTS_STATUS]: 0x0000

Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000

Packed command status [PACKED_COMMAND_STATUS]: 0x00

Packed command failure index [PACKED_FAILURE_INDEX]: 0x00

Power Off Notification [POWER_OFF_NOTIFICATION]: 0x00

Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x00

------------Done parsing------------
Writing as extCSD 4.5
Done.

Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1701 mV
CMD Active Level:1784 mV
Length limit is enabled!
Input file : C:\Temp temp\G 316HU Boot Repair\SAMSUNG_SM-G316HU_emmc_direct_dump_109MB\SAMSUNG_SM-G316HU_emmc_direct_dump_109MB\SAMSUNG_SM-G316HU_emmc_dump_ROM1_109MB.bin
Writing 0000000200 bytes to 0000000000... ROM1 (USER ROM)
Retry writing adress 0x0000000000 (Attempt #0)...
Retry Success!
Done. Write Speed: 0 kB/s

Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1773 mV
Input file : C:\Temp temp\G 316HU Boot Repair\SAMSUNG_SM-G316HU_emmc_direct_dump_109MB\SAMSUNG_SM-G316HU_emmc_direct_dump_109MB\SAMSUNG_SM-G316HU_emmc_dump_ROM2.bin
Writing 0000400000 bytes to 0000000000 ...ROM2 (BOOT1 ROM)
Done. Write Speed: 770 kB/s

Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1701 mV
CMD Active Level:1784 mV
Input file : C:\Temp temp\G 316HU Boot Repair\SAMSUNG_SM-G316HU_emmc_direct_dump_109MB\SAMSUNG_SM-G316HU_emmc_direct_dump_109MB\SAMSUNG_SM-G316HU_emmc_dump_ROM3.bin
Writing 0000400000 bytes to 0000000000 ...ROM3 (BOOT2 ROM)
Done. Write Speed: 774 kB/s





Log given by attached

Please help by telling me the procedure of Emmc Boot Repair


Thanks a Lot

[ilyasrao]

wrtite by vender pit+bl

[ar.vill]

your log window is for easy jtag tool, just use easy jtag plus and go to vendor flashing. You need to load pit file and just bootloader file so as to not wait too long to finish your work on flashing the stock firmware.

[rasheddk]

Could you please Tell where can i get the Boot-loader file

Thanks a Lot

[ar.vill]

Originally Posted by rasheddk

Could you please Tell where can i get the Boot-loader file

Thanks a Lot

if you have 4-file firmware then there should be BL file, just load pit file and bl file consequently.

if you only have single firmware, still load pit file and the whole single file, just unselect system, userdata, hidden then.

[rasheddk]

Originally Posted by ar.vill

if you have 4-file firmware then there should be BL file, just load pit file and bl file consequently.

if you only have single firmware, still load pit file and the whole single file, just unselect system, userdata, hidden then.

Brother i written another model sam sm-g570f log given below but no download mode appear (where is the problem i cant guess help please)


11/29/2017 7:19:33 PM> eMMC_tool Suite ver. 1.4.8.0
11/29/2017 7:19:33 PM> Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)
11/29/2017 7:19:33 PM>
11/29/2017 7:19:33 PM> Looking for EasyJTAG box...
11/29/2017 7:19:33 PM> EasyJTAG API ver. 2008
11/29/2017 7:19:33 PM> Setting IO Levels to 2.8V
11/29/2017 7:19:33 PM> Setting frequence to 14 Mhz
11/29/2017 7:19:33 PM> HiPower mode is OFF
11/29/2017 7:19:34 PM> OpenUSB returned = 0
11/29/2017 7:19:34 PM> Power Controller returned = 0
11/29/2017 7:19:36 PM> EasyJTAG Box Serial = 010110*********
11/29/2017 7:19:42 PM> Card Serial = AAF8-CD2D
11/29/2017 7:19:42 PM> CardAttr = 3B7D95000080318065B08311**********
11/29/2017 7:19:42 PM> EasyJTAG Box Firmware = 01.60
11/29/2017 7:19:42 PM>
11/29/2017 7:20:08 PM> Looking for EasyJTAG box...
11/29/2017 7:20:08 PM> EasyJTAG API ver. 2008
11/29/2017 7:20:08 PM> Setting IO Levels to 2.8V
11/29/2017 7:20:08 PM> Setting frequence to 14 Mhz
11/29/2017 7:20:08 PM> HiPower mode is OFF
11/29/2017 7:20:09 PM> OpenUSB returned = 0
11/29/2017 7:20:09 PM> Power Controller returned = 0
11/29/2017 7:20:11 PM> EasyJTAG Box Serial = 0101************
11/29/2017 7:20:11 PM> EasyJTAG Box Firmware = 01.60
11/29/2017 7:20:11 PM> HiPower mode is OFF
11/29/2017 7:20:11 PM> Frequence: 14 Mhz
11/29/2017 7:20:11 PM> CMD Pullup Level: 402 mV
11/29/2017 7:20:11 PM> CMD Active Level: 2268 mV
11/29/2017 7:20:11 PM> eMMC Init returned = 0
11/29/2017 7:20:11 PM> EMMC Device Information :
11/29/2017 7:20:11 PM> EMMC CID: 150100513331334242007298D85CB3AC
11/29/2017 7:20:11 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
11/29/2017 7:20:11 PM> EMMC Manufacture Name: SAMSUNG
11/29/2017 7:20:11 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0100
11/29/2017 7:20:11 PM> EMMC Manufacture Date: 11/2016 , Rev: 00
11/29/2017 7:20:11 PM> EMMC NAME: Q313BB , S/N: 7298D85C , rev. 00
11/29/2017 7:20:12 PM> EMMC NAME (HEX): 513331334242
11/29/2017 7:20:12 PM> EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
11/29/2017 7:20:12 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/29/2017 7:20:12 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/29/2017 7:20:12 PM> EMMC Permanent Write Protection: No
11/29/2017 7:20:12 PM> EMMC Temporary Write Protection: No
11/29/2017 7:20:12 PM> Extended CSD Information :
11/29/2017 7:20:12 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/29/2017 7:20:12 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/29/2017 7:20:12 PM> Boot Bus Config: 0x01 , width 4bit
11/29/2017 7:20:12 PM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
11/29/2017 7:20:12 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/29/2017 7:20:12 PM> Device supports partitioning features
11/29/2017 7:20:12 PM> Device can have enhanced technological features in partitions and user data area
11/29/2017 7:20:12 PM> Device can have extended partitions attribute
11/29/2017 7:20:12 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/29/2017 7:20:12 PM> Backup saved: Q313BB_7298D85C_20171129_192012.extcsd
11/29/2017 7:20:12 PM> EMMC Init completed.
11/29/2017 7:20:12 PM>
11/29/2017 7:20:12 PM> Opening file: I:\Samsung Files\G570F\SM-G570F_11-10-2017_12-29-27.pit
11/29/2017 7:20:12 PM>
11/29/2017 7:20:12 PM> Pit: SM-G570F_11-10-2017_12-29-27.pit
11/29/2017 7:20:12 PM> Entry count: 29
11/29/2017 7:20:12 PM>
11/29/2017 7:20:12 PM> The size of the last section has been updated
11/29/2017 7:20:25 PM> Selected file: I:\Samsung Files\G570F\G570F_XXU1AQA5_OXE1AQA3\G570F_XXU1AQA5 _OXE1AQA3\BL_G570FXXU1AQA5_CL10513652_QB12393727_R EV00_user_low_ship.tar.md5
11/29/2017 7:20:26 PM>
11/29/2017 7:20:26 PM> BL_G570FXXU1AQA5_CL10513652_QB12393727_REV00_user_ low_ship.tar.md5
11/29/2017 7:20:26 PM> The list of files in the firmware:
11/29/2017 7:20:26 PM> sboot.bin
11/29/2017 7:20:26 PM> param.bin
11/29/2017 7:20:26 PM> cm.bin
11/29/2017 7:20:26 PM>
11/29/2017 7:20:34 PM> Looking for EasyJTAG box...
11/29/2017 7:20:34 PM> EasyJTAG API ver. 2008
11/29/2017 7:20:34 PM> Setting IO Levels to 2.8V
11/29/2017 7:20:34 PM> Setting frequence to 14 Mhz
11/29/2017 7:20:34 PM> HiPower mode is OFF
11/29/2017 7:20:35 PM> OpenUSB returned = 0
11/29/2017 7:20:35 PM> Power Controller returned = 0
11/29/2017 7:20:36 PM> EasyJTAG Box Serial = 0101100D********
11/29/2017 7:20:36 PM> EasyJTAG Box Firmware = 01.60
11/29/2017 7:20:36 PM> HiPower mode is OFF
11/29/2017 7:20:37 PM> Frequence: 14 Mhz
11/29/2017 7:20:37 PM> CMD Pullup Level: 433 mV
11/29/2017 7:20:37 PM> CMD Active Level: 2258 mV
11/29/2017 7:20:37 PM> eMMC Init returned = 0
11/29/2017 7:20:37 PM> EMMC Device Information :
11/29/2017 7:20:37 PM> EMMC CID: 150100513331334242007298D85CB3AC
11/29/2017 7:20:37 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
11/29/2017 7:20:37 PM> EMMC Manufacture Name: SAMSUNG
11/29/2017 7:20:37 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0100
11/29/2017 7:20:37 PM> EMMC Manufacture Date: 11/2016 , Rev: 00
11/29/2017 7:20:37 PM> EMMC NAME: Q313BB , S/N: 7298D85C , rev. 00
11/29/2017 7:20:37 PM> EMMC NAME (HEX): 513331334242
11/29/2017 7:20:37 PM> EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
11/29/2017 7:20:37 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
11/29/2017 7:20:37 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
11/29/2017 7:20:37 PM> EMMC Permanent Write Protection: No
11/29/2017 7:20:37 PM> EMMC Temporary Write Protection: No
11/29/2017 7:20:37 PM> Extended CSD Information :
11/29/2017 7:20:37 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
11/29/2017 7:20:37 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
11/29/2017 7:20:37 PM> Boot Bus Config: 0x01 , width 4bit
11/29/2017 7:20:37 PM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
11/29/2017 7:20:37 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
11/29/2017 7:20:37 PM> Device supports partitioning features
11/29/2017 7:20:37 PM> Device can have enhanced technological features in partitions and user data area
11/29/2017 7:20:37 PM> Device can have extended partitions attribute
11/29/2017 7:20:37 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
11/29/2017 7:20:37 PM> Backup saved: Q313BB_7298D85C_20171129_192037.extcsd
11/29/2017 7:20:37 PM> EMMC Init completed.
11/29/2017 7:20:37 PM>
11/29/2017 7:20:37 PM> Operation: Write by vendor (Samsung)
11/29/2017 7:20:37 PM>
11/29/2017 7:20:37 PM> Creating GPT-partitioninig
11/29/2017 7:20:37 PM> Writing PIT at address: 000000004400
11/29/2017 7:20:37 PM> GPT-partitioning done
11/29/2017 7:20:37 PM>
11/29/2017 7:20:37 PM> Unpacking file: cm.bin
11/29/2017 7:20:37 PM> Unpacking file: sboot.bin
11/29/2017 7:20:38 PM> Unpacking file: param.bin
11/29/2017 7:20:38 PM>
11/29/2017 7:20:38 PM> Partition name: CM
11/29/2017 7:20:38 PM> Filename: cm.bin , Offset: 000000000000 , filesize: 2248976 bytes
11/29/2017 7:20:38 PM> eMMC switching to ROM3
11/29/2017 7:20:38 PM> Erasing partition...
11/29/2017 7:21:00 PM> Writing partition...
11/29/2017 7:21:16 PM> Done writing partition. Write speed: 137.08 Kb/s
11/29/2017 7:21:16 PM> Partition name: BOOTLOADER
11/29/2017 7:21:16 PM> Filename: sboot.bin , Offset: 000000000000 , filesize: 1601808 bytes
11/29/2017 7:21:16 PM> eMMC switching to ROM2
11/29/2017 7:21:17 PM> Erasing partition...
11/29/2017 7:21:46 PM> Writing partition...
11/29/2017 7:22:00 PM> Done writing partition. Write speed: 118.75 Kb/s
11/29/2017 7:22:00 PM> Partition name: PARAM
11/29/2017 7:22:00 PM> Filename: param.bin , Offset: 000003500000 , filesize: 819200 bytes
11/29/2017 7:22:00 PM> eMMC switching to ROM1
11/29/2017 7:22:00 PM> Erasing partition...
11/29/2017 7:22:04 PM> Writing partition...
11/29/2017 7:22:06 PM> Done writing partition. Write speed: 315.93 Kb/s
11/29/2017 7:22:06 PM>
11/29/2017 7:22:06 PM> All done
11/29/2017 7:22:06 PM>