GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Easy-Jtag / Easy-Jtag Plus (https://forum.gsmhosting.com/vbb/f672/)
-   -   Z3x Easy Jtag cant detect emmc on good board (https://forum.gsmhosting.com/vbb/f672/z3x-easy-jtag-cant-detect-emmc-good-board-2838086/)

first aider 05-16-2020 13:06
Z3x Easy Jtag cant detect emmc on good board
 
hi sir .good evening .pls help on my z3x easy jtag.i wotn detect any emmc .i have Oppo A3s here that has passcode problem but it wont detect emmc :) i am using Gpg adoptor

[IMG]https://i.postimg.cc/KRNrgcNK/download.jpg[/IMG]

here is the logs always like this .even i have put resistors :(

[IMG]https://i.postimg.cc/2q8z8G5b/z3x.png[/IMG]

layder 05-16-2020 14:48
1 Attachment(s)
Check voltage, check connection, try to use hipower mode with modded adapter

first aider 05-17-2020 03:27
Quote:
Originally Posted by layder (Post 14092264)
Check voltage, check connection, try to use hipower mode with modded adapter
hi sir .thank you for your reply.you mean i will not use adoptor and connect this point from box to direct board ?

layder 05-17-2020 09:47
adapter only need for convert 5v from USB conector to get 2,8 and 1,8 voltage for isp connection

hi power mode not need 1,8v and 2,8v wires - only D_0/CMD/CLK, GND and need power device from usb charger or (battary + press power button)

"Hi power CLK mode" need 4 wires CLK (for old box) and "hi-power" settings at software

first aider 05-18-2020 08:18
Quote:
Originally Posted by layder (Post 14092698)
adapter only need for convert 5v from USB conector to get 2,8 and 1,8 voltage for isp connection

hi power mode not need 1,8v and 2,8v wires - only D_0/CMD/CLK, GND and need power device from usb charger or (battary + press power button)

"Hi power CLK mode" need 4 wires CLK (for old box) and "hi-power" settings at software
thank you for your reply sir :) oppoA3s passcode is now removed

Quote:
eMMC CID : 150100514536334D42068821AA57B526
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 11/2018 Rev.0x6
eMMC NAME: QE63MB , S/N: 2283907671
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 14564 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,30535646
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x0158000000 (9.184GB)
Erasing...
Done.
Detected (Android Cache)) CACHE : 0x001FB00000 (256.0MB)
Erasing...
Done.
---------------------------------------------
Done.

Running:Format FRP Partition...
Z3X EasyJtag Software ver. 3.6.2.0
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 07FFA01D5E51D525, ,FW Ver.: 01.63
CMD Pullup Level:2031 mV
CMD Active Level:2681 mV
Box IO Level:2800 mV
CLK Rate:3000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536334D42068821AA57B526
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 11/2018 Rev.0x6
eMMC NAME: QE63MB , S/N: 2283907671
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 14564 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,30535646
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB) , formatting...
Done.
Detected LINUX(Android) CONFIG : 0x002FC80000 (32.0KB) formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0158000000 (9.184GB) , formatting...
Done.
Done.
Done.


All times are GMT +1. The time now is 01:32.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.12162 seconds with 7 queries

SEO by vBSEO