Z3X Easy-JTAG PLUS Update. eMMC Plus 1.5.2.0 released. - Page 2 - GSM-Forum

Gsm Malek · 08-08-2018, 05:36

good update sir plz add huawei too z3x box team

layder · 08-08-2018, 20:42

Note:

If firmware update of box is stopped at 0% - Remove other Smart card donge from PC (like Infinity dongle) for the duration of the box firmware update

narangmoga · 08-09-2018, 14:21

is it posible to flash emmc andriode led tv board. i try flash writen but working board gone standby . emmc connected but no firmware info .
8/8/2018 11:20:17 AM> EasyJTAG Box Firmware = 1.63
8/8/2018 11:20:19 AM> Setting frequence to 7 Mhz
8/8/2018 11:20:19 AM> CMD Pullup Level: 2083 mV
8/8/2018 11:20:19 AM> CMD Active Level: 2433 mV
8/8/2018 11:20:19 AM> eMMC Init returned = 0
8/8/2018 11:20:19 AM> EMMC Device Information :
8/8/2018 11:20:19 AM> EMMC CID: 15010034465044335202D7F9FC08537E
8/8/2018 11:20:19 AM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
8/8/2018 11:20:19 AM> EMMC Manufacture : SAMSUNG , EMMC NAME: 4FPD3R , HEX: 344650443352 , S/N: D7F9FC08 , rev. 0x02
8/8/2018 11:20:19 AM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 5/2016
8/8/2018 11:20:19 AM> EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
8/8/2018 11:20:19 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
8/8/2018 11:20:19 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
8/8/2018 11:20:19 AM> EMMC Permanent Write Protection: No
8/8/2018 11:20:19 AM> EMMC Temporary Write Protection: No
8/8/2018 11:20:19 AM> Extended CSD Information :
8/8/2018 11:20:19 AM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
8/8/2018 11:20:19 AM> Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
8/8/2018 11:20:19 AM> Boot Bus Config: 0x02 , width 8bit
8/8/2018 11:20:19 AM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
8/8/2018 11:20:19 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
8/8/2018 11:20:19 AM> Device supports partitioning features
8/8/2018 11:20:19 AM> Device can have enhanced technological features in partitions and user data area
8/8/2018 11:20:19 AM> Device can have extended partitions attribute
8/8/2018 11:20:19 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
8/8/2018 11:20:19 AM> Backup saved: 4FPD3R_D7F9FC08_20180808_112019.extcsd
8/8/2018 11:20:19 AM> EMMC Init completed.
if posible pls add to write firmware for andriode led tv boards

mohdfaizan987 · 08-09-2018, 18:28

Dear Z3X Box Team Thanks For This Amazing Update But Please
Add If Its Possible
OnePlus Series All models
Like
1+1
1+2
1+3
1+3t
1+5
1+5t & 1+6 Dead Boot Solutions With Re-Partition Option
Thanks Best Regards

farukpdm · 08-20-2018, 19:15

All ready support this mode
When show 9008 port then need to connect usb on pcb
No need charger on isp adapter

Quote:

Originally Posted by buffer2k11

please add if possible boot repair samsung via qualcomm 9008 port

br,

Quote:

Originally Posted by SAJONDUTTA

yes we need lg 9008 usb boot repair urgent

Quote:

Originally Posted by mh mobile

yrs i need 9008 port boot repair

Sent from my Redmi 4X using Tapatalk

rico_deep · 08-21-2018, 04:18

Quote:

Originally Posted by farukpdm

All ready support this mode
When show 9008 port then need to connect usb on pcb
No need charger on isp adapter

Sent from my Redmi 4X using Tapatalk

what???? .........................

shafi_136 · 09-04-2018, 07:05

Z3X EasyJTAG eMMC Plus version 1.5.2.0 SETUP FILE PLZ

robertyanta83 · 09-13-2018, 16:58

Quote:

Originally Posted by shafi_136

Z3X EasyJTAG eMMC Plus version 1.5.2.0 SETUP FILE PLZ

https://z3x-team.com/support_files/
Software > Easy Jtag

MOHD INSHAAL · 09-15-2018, 05:09

can he suport sony sov33

kuli · 10-22-2018, 12:50

hi all

i need a litle help from z3x jtag plus users....

i have z3x pro box (GPG INDUSTRIEs) with jtag and samsung activated

Box Drivers version: 10.0.17134.1, are OK
Z3X Card Serial : ******* , ver: 22
Z3X Card Activation [JTAGPLUS] : NOT ACTIVATED
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED

but i need plus version too. My question is which pack is ok for my box (coz i saw many price under same box specification on gsmserver.com) and can be activate on GPGINDUSTRIES box (card was actvated in 2015. 04. 08 reseller GPGMASTER)

thx in advance

layder · 10-22-2018, 16:31

Quote:

Originally Posted by kuli

hi all

i need a litle help from z3x jtag plus users....

i have z3x pro box (GPG INDUSTRIEs) with jtag and samsung activated

Box Drivers version: 10.0.17134.1, are OK
Z3X Card Serial : ******* , ver: 22
Z3X Card Activation [JTAGPLUS] : NOT ACTIVATED
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED

but i need plus version too. My question is which pack is ok for my box (coz i saw many price under same box specification on gsmserver.com) and can be activate on GPGINDUSTRIES box (card was actvated in 2015. 04. 08 reseller GPGMASTER)

thx in advance

EasyJTAG Plus Activation included with EasyJTAG box hardware. Seller will be add activation with sell box

rogerboogie · 11-05-2018, 11:45

Please add support for flash factory files for huawei mobiles

Update.app format

Also will be very useful if can add option for unlock boot loader for some mobiles using direct emmc mode

>>PakFones<< · 11-07-2018, 19:26

Is there any chance to recover user contacts and other files from Qualcomm, MTK based phones with android 7 or higher OS? Please let us know if it can be done by any way?

I know it's encrypted but still want to know, Can we use dump or userdata.img on Emulator devices? because phone is totally dead, User have screen password.

layder · 11-07-2018, 20:21

Quote:

Originally Posted by >>PakFones<<

Is there any chance to recover user contacts and other files from Qualcomm, MTK based phones with android 7 or higher OS? Please let us know if it can be done by any way?

I know it's encrypted but still want to know, Can we use dump or userdata.img on Emulator devices? because phone is totally dead, User have screen password.

No way to decrypt usedata. Only put CPU anf Flash IC to another PCB and run phone and enter password

08-08-2018, 05:36	#16 (permalink)
Gsm Malek Insane Poster Join Date: Mar 2018 Location: dhaka jatrabari Posts: 80 Member: 2826163 Status: Offline Thanks Meter: 25	good update sir plz add huawei too z3x box team

08-08-2018, 20:42	#17 (permalink)
layder Product Supporter Join Date: Jun 2002 Location: Belarus Age: 47 Posts: 3,187 Member: 13148 Status: Offline Thanks Meter: 2,948	Note: If firmware update of box is stopped at 0% - Remove other Smart card donge from PC (like Infinity dongle) for the duration of the box firmware update

08-09-2018, 18:28	#19 (permalink)
mohdfaizan987 Freak Poster Join Date: Apr 2015 Location: NEW DELHI INDIA Posts: 260 Member: 2376362 Status: Offline Sonork: 1664031:mohd Thanks Meter: 49	Dear Z3X Box Team Thanks For This Amazing Update But Please Add If Its Possible OnePlus Series All models Like 1+1 1+2 1+3 1+3t 1+5 1+5t & 1+6 Dead Boot Solutions With Re-Partition Option Thanks Best Regards

09-04-2018, 07:05	#22 (permalink)
shafi_136 Freak Poster Join Date: Jan 2011 Location: Bangladesh Posts: 399 Member: 1497712 Status: Offline Thanks Meter: 83	Z3X EasyJTAG eMMC Plus version 1.5.2.0 SETUP FILE PLZ

09-15-2018, 05:09	#24 (permalink)
MOHD INSHAAL Junior Member Join Date: Sep 2018 Age: 24 Posts: 2 Member: 2863664 Status: Offline Thanks Meter: 0	can he suport sony sov33

10-22-2018, 12:50	#25 (permalink)
kuli Freak Poster Join Date: Oct 2003 Location: Romania Age: 49 Posts: 234 Member: 41105 Status: Offline Thanks Meter: 43	hi all i need a litle help from z3x jtag plus users.... i have z3x pro box (GPG INDUSTRIEs) with jtag and samsung activated Box Drivers version: 10.0.17134.1, are OK Z3X Card Serial : ******* , ver: 22 Z3X Card Activation [JTAGPLUS] : NOT ACTIVATED Z3X Card Activation [LG] : NOT ACTIVATED Z3X Card Activation [SAMS] : ACTIVATED Z3X Card Activation [JTAG] : ACTIVATED but i need plus version too. My question is which pack is ok for my box (coz i saw many price under same box specification on gsmserver.com) and can be activate on GPGINDUSTRIES box (card was actvated in 2015. 04. 08 reseller GPGMASTER) thx in advance

11-05-2018, 11:45	#27 (permalink)
rogerboogie No Life Poster Join Date: Jan 2005 Location: the earth Age: 41 Posts: 1,037 Member: 103024 Status: Offline Thanks Meter: 616	Please add support for flash factory files for huawei mobiles Update.app format Also will be very useful if can add option for unlock boot loader for some mobiles using direct emmc mode

11-07-2018, 19:26	#28 (permalink)
>>PakFones<< No Life Poster Join Date: Jul 2007 Location: My Computer Posts: 1,308 Member: 553178 Status: Offline Sonork: 100.1592454 Thanks Meter: 957	Is there any chance to recover user contacts and other files from Qualcomm, MTK based phones with android 7 or higher OS? Please let us know if it can be done by any way? I know it's encrypted but still want to know, Can we use dump or userdata.img on Emulator devices? because phone is totally dead, User have screen password.