Sony J70 flash problem - GSM-Forum

golden_gate · 10-22-2003, 16:09

I have one J70 to flash but flasher software not working. I'm using data cable that :
pin 5 - pin 10 short circuit
pin 7 rx
pin 8 tx
pin 12 gnd

This cable running with sony logger.but not running when flashing. Program says , power on the mobile and I'm pushing power button on the phone but nothing happens. Only phone is opening. Where is the problem , what is my mistake ?

Regards

kennyli · 10-25-2003, 20:04

I think this is not a flasher cable but a com-port data cable!

GSM RAJ · 10-26-2003, 12:37

What is the pinout for flashing ?

-=SanSanyc=- · 10-29-2003, 02:28

Just use Universal box or cable with Externlal power (not from COM).

10-22-2003, 16:09	#1 (permalink)
golden_gate Junior Member Join Date: Oct 2003 Posts: 5 Member: 41822 Status: Offline Thanks Meter: 0	Sony J70 flash problem I have one J70 to flash but flasher software not working. I'm using data cable that : pin 5 - pin 10 short circuit pin 7 rx pin 8 tx pin 12 gnd This cable running with sony logger.but not running when flashing. Program says , power on the mobile and I'm pushing power button on the phone but nothing happens. Only phone is opening. Where is the problem , what is my mistake ? Regards

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SONY J70 unlocking problem ???????/	mark3	Sony	2	05-19-2005 10:34
Sony J70 buzzer problem	Porter	Sony Ericsson Hardware Repair	9	03-16-2005 11:36
Sony J70 unlock problem (001-01)	Bacila	Sony	5	10-01-2004 15:15
J70 flash problem in the end	fm-gsm	Sony	0	12-15-2002 18:06
Sony J70 flashing problemz...	dimka	Sony	2	04-13-2002 13:58

10-25-2003, 20:04	#2 (permalink)
kennyli No Life Poster Join Date: Dec 2002 Location: Asia Posts: 892 Member: 19208 Status: Offline Thanks Meter: 2	I think this is not a flasher cable but a com-port data cable!

10-26-2003, 12:37	#3 (permalink)
GSM RAJ No Life Poster Join Date: May 2001 Location: gujarat india Posts: 1,217 Member: 4600 Status: Offline Thanks Meter: 79	What is the pinout for flashing ?

10-29-2003, 02:28	#4 (permalink)
-=SanSanyc=- Freak Poster Join Date: Aug 2002 Location: CZ: Praga, BY: Minsk Age: 56 Posts: 448 Member: 14640 Status: Offline Thanks Meter: 0	Just use Universal box or cable with Externlal power (not from COM).