SONY Z5 UNLOCKER 2.00 AND SONY ALL BY GSMHACKING

[yaya]

HEY<br />DOES THIS SOFT WORK REALLY?<br />I MODIFY ALL MY CABLE BUT NEVER I GOT ANSWER FROM PHONE.<br />WITH THE FIRST SOFT I GET EVERY TIME THIS ERROR MESSAGE :ERROR CABLE OR BAD PHONE<br />WITH THE SECOND SOFT I GET ALSO AFTER THE MESSAGE READING CODE THIS: FAIL

CAN YOU SAY ME HOW THIS SOFT WORK<br />1) IN WHAT SPPEED WORK CORRECTLY THE SONYALL<br />2)WHAT IS THE STATUS OF PHONE <img src="redface.gif" border="0"> N OR OFF<br />3)WHEN YOU CLIC ON UNLOCK ,THE PHONE MUST BE ON OR OFF<br />4) IS THIS THE CORRECT CABLE PIN OUT

PIN5 TX<br />PIN14 RX<br />PIN9 +5V<br />PIN18 GND

<br />WAITING YOU

[Demon_Ok]

[yaya]

this is what i have but does not work<br />is sony unlocker 2.00 and sony all correctly working good<br />thank

[NUGSM]

When using sony unlocker 2.00 you must have a cable with an external power supply. You must also follow these steps:

Enter imei on program.

Make sure there is no sim card in the phone.

Connect cable and hit unlock on program.

Now hold the power button on the phone, should display Z5 detected and start writing to phone.

When it finishes writing a box ill appear saying turn phone on and hit ok. **Important**<br />Before you do this remove cable and battery and then replace them.

Now power on phone and hit ok, you will now see messages saying simlock removed etc.

Hope that helps, can you send me the sonyall software <br /> [email protected]

[alro]

Hi<br />that soft need an other pinout. External power is not necessery!!!! I have a unibox with external power, but I also made z5 cables who really worked without external power.<br />If anybody wants the schematic what I made, mail me, it is on my laptop and I'm now behind my desktop.<br />Regards,<br />Alro