|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| |||||||
| Register | FAQ | Donate | Forum Rules | ★. iPhone Unlock .★ | -= JTAG BOOM =- | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
02-29-2012, 06:05
| #1 (permalink) |
| Temporary banned !!  Join Date: Jul 2011 Location: ::...INDIA..::
Posts: 2,462
Member: 1619462 Status: Offline Sonork: 100.1606509 Thanks: 633
Thanked 983 Times in 583 Posts
| Hyper Box 2.42 Update 28-02-2012 ...TEST REPORTS ONLY HERE.... HERE YOU CAN SHARE ALL SUCESSFUL REPORTS NEED LOG OR SCREEN SHORTS. WITH V2.42 SHARE PHONE MODEL, AND WORKING READED FLASH FILE HERE. |
 |
| The Following 2 Users Say Thank You to .::EXTREME::. For This Useful Post: |
|
02-29-2012, 08:22
| #2 (permalink) |
| Product Supporter   Join Date: Apr 2007 Location: M W Balasore,Odisha,INDIA Age: 41
Posts: 9,037
Member: 492222 Status: Offline Sonork: 100.1594126 Thanks: 1,547
Thanked 7,272 Times in 2,478 Posts
| My 1st report of Hyper Box  |
| |
| The Following 3 Users Say Thank You to srinibas For This Useful Post: |
|
02-29-2012, 08:37
| #3 (permalink) |
| Product Supporter Join Date: Apr 2007 Location: M W Balasore,Odisha,INDIA Age: 41
Posts: 9,037
Member: 492222 Status: Offline Sonork: 100.1594126 Thanks: 1,547
Thanked 7,272 Times in 2,478 Posts
| Gfive E71 ( Nokia Clone )  |
| |
| The Following 3 Users Say Thank You to srinibas For This Useful Post: |
|
03-26-2012, 12:34
| #5 (permalink) |
| No Life Poster  Join Date: Nov 2006 Location: Kashmir mangoge bhoon denge Age: 29
Posts: 4,428
Member: 398557 Status: Offline Sonork: 100.1578489 Thanks: 555
Thanked 1,520 Times in 885 Posts
|  Sucessfully revive io-Sound j-005 Here is the log Initializing... DA_LIB_VER_3.9.0.0 It is sensing the pinout fast,please hold on the phone Power key RXD=22 TXD=23 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098000300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: MAUI.GEMINI.W08.12 Changing baudrate to 921600... Done. Formatting Flash... AutoFormat address: start=0x00E00000, size=0x00200000 All Done Vijendra Saini. |
| |
|
03-29-2012, 14:40
| #6 (permalink) |
| No Life Poster  Join Date: Sep 2005 Location: TR-LAZ
Posts: 630
Member: 178227 Status: Offline Sonork: 100.1597371 Thanks: 1,305
Thanked 134 Times in 92 Posts
| Initializing... DA_LIB_VER_3.9.0.0 It is sensing the pinout fast,please hold on the phone Power key RXD=10 TXD=11 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6235, HardwareVer:8A01, SoftwareVer:8C00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0000000000000000 Nand Flash ID: 00AD007600AD0076 Read Hardware Information is done. Get Project ID from phone... Project ID: A761_MOXI_V2_L1_256W3_LCD_EY_V06 Changing baudrate to 921600... Done. Formatting Flash... AutoFormat address: start=0x02000000, size=0x02000000 All Done |
| |
| The Following User Says Thank You to .::TR_LAZ::. For This Useful Post: |
|
03-31-2012, 07:08
| #7 (permalink) |
| Product Manager  Join Date: Jun 2011 Location: Coding Hyper-Box Age: 41
Posts: 412
Member: 1600926 Status: Offline Sonork: 100.64977 Thanks: 93
Thanked 398 Times in 80 Posts
| Initializing... DA_LIB_VER_3.9.0.0 It is sensing the pinout fast,please hold on the phone Power key RXD=22 TXD=23 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098000300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: MAUI.GEMINI.W08.12 Changing baudrate to 921600... Done. Formatting Flash... AutoFormat address: start=0x00E00000, size=0x00200000 All Done |
| |
| The Following User Says Thank You to Hyper Box For This Useful Post: |
|
04-27-2012, 12:51
| #8 (permalink) |
| Crazy Poster  Join Date: Mar 2008 Location: SHAHKOT [NANKAN SAHIB]
Posts: 58
Member: 729392 Status: Offline Sonork: YAHOO Thanks: 19
Thanked 3 Times in 3 Posts
| Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:11:33 PM+++++++++++++++++++ -------------------Created: 4/24/2012 1:11:40 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:11:47 PM+++++++++++++++++++ -------------------Created: 4/24/2012 1:12:08 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:12:14 PM+++++++++++++++++++ -------------------Created: 4/24/2012 1:12:28 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 1:12:34 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:02:06 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=Auto-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... Failed to run bootloader... +++++++++++++++++++End at: 4/24/2012 2:02:13 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:02:22 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Failed to set Flash parameters... +++++++++++++++++++End at: 4/24/2012 2:02:36 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:02:56 PM------------------- Chip=SpreadTrum Action=Format FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Failed to set Flash parameters... +++++++++++++++++++End at: 4/24/2012 2:03:10 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:03:18 PM------------------- Chip=SpreadTrum Action=Format FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Failed to set Flash parameters... +++++++++++++++++++End at: 4/24/2012 2:03:32 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:04:12 PM------------------- Chip=SpreadTrum Action=Format FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 115200 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Reading FileSystem info... FileSystem Version: 0A Start=0x003B0000, Size=0x00050000 Unlocking all blocks before program/erase... Unlock Done. Auto formatting... Done. +++++++++++++++++++End at: 4/24/2012 2:04:39 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:06:54 PM------------------- Chip=SpreadTrum Action=Reset FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 115200 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Unlocking all blocks before program/erase... Unlock Done. Analyzing FileSystem... Done. Reset the user data area... Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action. All Done. +++++++++++++++++++End at: 4/24/2012 2:07:13 PM+++++++++++++++++++ -------------------Created: 4/24/2012 2:26:36 PM------------------- Chip=SpreadTrum Action=ReadInfo FlashType=NOR boot=6600L/WT6226-COM Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=SC6610/20 CPU_ID=66100000 NOR_ID=00C8004000160000 NOR_Size=4MB NOR_Name=SF_GD25Q32 NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast... RXD=9 TXD=21 Connecting... Connected...sending boot... FDL test...OK ArmBootMode: 6610000000EA6A00_00 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 115200 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_GD25Q32 setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Reading FileSystem info... File System Ver: 0A IMEI 1=352396060020209 IMEI 2=910575601400468 ------Auto Format Address------- Start=0x003B0000 Size =0x00050000 Read FS info...done +++++++++++++++++++End at: 4/24/2012 2:26:56 PM+++++++++++++++++++ -------------------Created: 4/26/2012 1:58:03 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.1108 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=MT6252 CPU_ID=00000007 NOR_ID=00EF004000150000 NOR_Size=0MB NOR_Name=Unsupport Flash NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=21 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6252, HardwareVer:8B00, SoftwareVer:CA05 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EF004000150000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... ProjectID Not Found. +++++++++++++++++++End at: 4/26/2012 1:58:15 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:00:13 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=InternalRamBoot Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=MT6252 CPU_ID=00000007 NOR_ID=00EF004000150000 NOR_Size=2MB NOR_Name=SF_W25Q16CV NOR_DieCnt=1 NAND_ID= NAND_Size= NAND_Name= Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=21 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... BB:6252, HardwareVer:8B00, SoftwareVer:CA05 Loading boot... Boot init completed. Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Reading phone HW info... Read info is done. BB: MT6252 Flash: SF_W25Q16CV setting the Flash Parameters... Settings have been completed! Changing baudrate... Set baudrate to 921600 ...ok +++++++++++++++++++End at: 4/26/2012 2:00:20 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:00:31 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.1108 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=MT6252 CPU_ID=00000007 NOR_ID=00EF004000150000 NOR_Size=0MB NOR_Name=Unsupport Flash NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=21 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6252, HardwareVer:8B00, SoftwareVer:CA05 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EF004000150000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... ProjectID Not Found. +++++++++++++++++++End at: 4/26/2012 2:00:43 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:17:59 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.1108 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... +++++++++++++++++++End at: 4/26/2012 2:18:07 PM+++++++++++++++++++ Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... The process stopped. +++++++++++++++++++End at: 4/26/2012 2:18:08 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:18:20 PM------------------- Chip=MTK Action=ReadInfo FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 CPU_Type=MT6253 CPU_ID=0000000F NOR_ID=0089890300000000 NOR_Size=16MB NOR_Name=[INTEL] PF38F30xxM0x1xx NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0089890300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: D35_GFIVE_IT64H_CIF_V05 +++++++++++++++++++End at: 4/26/2012 2:19:05 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:19:16 PM------------------- Chip=MTK Action=Format FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=921600 Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... +++++++++++++++++++End at: 4/26/2012 2:19:48 PM+++++++++++++++++++ Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. User abort, freeing Download Agent, please wait... The process stopped. +++++++++++++++++++End at: 4/26/2012 2:19:49 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:19:57 PM------------------- Chip=MTK Action=Format FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 CPU_Type=MT6253 CPU_ID=0000000F NOR_ID=0089890300000000 NOR_Size=16MB NOR_Name=[INTEL] PF38F30xxM0x1xx NOR_DieCnt= NAND_ID=0000000000000000 NAND_Size=0MB NAND_Name=Nand:N/A Initializing... DA_LIB_VER_4.0.3.2 It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0089890300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: D35_GFIVE_IT64H_CIF_V05 Changing baudrate to 115200... Done. Formatting Flash... AutoFormat address: start=0x00E00000, size=0x00200000 All Done +++++++++++++++++++End at: 4/26/2012 2:20:50 PM+++++++++++++++++++ -------------------Created: 4/26/2012 2:21:22 PM------------------- Chip=MTK Action=IMEI FlashType=NOR boot=Ver3.848 Expert Mode=Disable Range[start]=0x0 Range[size]=0x0 Interface=COM FlashFile= Comport=COM16 Baudrate=115200 Initializing... DA_LIB_VER_4.0.3.2 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=21 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Read info...ok, Waitting enter meta... Connected...can release Power button now, tracking... IMEI=358688000000158 IMEI=358688000000158 Rebulid IMEI1=353056241231327 Rebulid IMEI2=353056413213213 +++++++++++++++++++End at: 4/26/2012 2:22:00 PM+++++++++++++++++++ |
| |
|
04-28-2012, 17:35
| #9 (permalink) |
| No Life Poster Join Date: Sep 2005 Location: TR-LAZ
Posts: 630
Member: 178227 Status: Offline Sonork: 100.1597371 Thanks: 1,305
Thanked 134 Times in 92 Posts
| Initializing... DA_LIB_VER_3.9.0.0 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=17 TXD=19 Connecting...Please hold on the ON/OFF key... Connecting, Please turn on the phone... Connected! Checking IMEI... Original IMEI 1= +EGMR: "" OK IMEI 1 rebuild has been implemented: 352*******6** Original IMEI 2= +EGMR: "" OK IMEI 2 rebuild has been implemented: 352********** Need to restart the phone to verify new imei. TR_LAZ |
| |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
