!! Hyper-Box !! Success Report Of Flash-Backup-Format-Unlock-Change IMEI !! - Page 4 - GSM-Forum

HYPERBOX_HELPER · 07-25-2011, 06:57

Code:

Initializing...
 DA_LIB_VER_3.4.1.2
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=5  TXD=4
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6223,    HardwareVer:8A05,    SoftwareVer:8A00
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 0098000300000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: PN-SC_CN_LLNUMLD_231_YYMMDD_CAM_MCPMCP_O
 Changing baudrate to 921600...
 Done.
 Formatting Flash...
 AutoFormat address: start=0x00E00000, size=0x00200000
 All Done

HYPERBOX_HELPER · 07-25-2011, 06:59

Code:

 Initializing...
 DA_LIB_VER_3.4.1.2
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=4  TXD=7
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6252,    HardwareVer:8B00,    SoftwareVer:CA04
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00C2002500370000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: NINE.10A.W11.08.MP.V1.F2.V1.0.07
 Changing baudrate to 921600...
 Done.
 Formatting Flash...
 AutoFormat address: start=0x00768000, size=0x00098000
 All Done

Hyper Box · 07-25-2011, 07:46

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=20 TXD=15
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: N66_ABROAD_2CDGB_S5LCD_V1.4.1
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

Hyper Box · 07-25-2011, 08:30

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: A11+_V07.12.52.H23
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

mobilecare.vcl · 07-25-2011, 08:34

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: L5BMM33.9.52.1.2T04M0113_M700
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

Hyper Box · 07-25-2011, 10:02

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=20 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098009E00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: N.G583.Y70M32.0205.10A1108M.1.0D110408S01
Changing baudrate to 921600...
Done.
Reading full Flash...
Saved file to:
C:\Documents and Settings\Razib\Desktop\My Phone
All Done.

Hyper Box · 07-26-2011, 09:36

Hyper Box · 07-26-2011, 15:05

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the ON/OFF key...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=1122
Code=01728
Code=1440

mobilecare.vcl · 07-27-2011, 07:02

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the ON/OFF key...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=135790246811220
IMEI=135790246811220
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180XXX
IMEI=352019048180XXX
IMEI=352019048180XXX
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
IMEI=352019048180xxx
Rebulid IMEI1=351987047690xxx
Rebulid IMEI2=352019048180xxx

Hyper Box · 07-27-2011, 13:59

ratheeshkutty · 07-28-2011, 06:10

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Error: Your software has been restricted.
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098009E00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: L50MM07.9.52.1.2T05M0820_M701
Changing baudrate to 921600...
Done.
any solution for this.....

Hyper Box · 07-28-2011, 14:31

Quote:

Originally Posted by ratheeshkutty

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Error: Your software has been restricted.
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098009E00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: L50MM07.9.52.1.2T05M0820_M701
Changing baudrate to 921600...
Done.
any solution for this.....

Use Update Hyper-box Ver 2.01 http://www.hyper-box.org/updates.php

Hyper Box · 07-31-2011, 06:57

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: A11+_V07.12.52.H23
Changing baudrate to 230400...
Done.
Analysis the file, Some file may need a long time...
Decryption complete. Key[B234D968127DBA1C]-B9
Downloading Flash file...
All Done.

mobilecare.vcl · 07-31-2011, 11:26

mobilecare.vcl · 07-31-2011, 11:31

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the ON/OFF key...
Any errors please select another boot and try again.
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=1357902468112XX
Rebulid IMEI1=3552120377330XX

07-27-2011, 07:02	#54 (permalink)
mobilecare.vcl No Life Poster Join Date: Jan 2009 Location: KERALA / SWAMI SARANAM Age: 36 Posts: 1,188 Member: 1334005 Status: Offline Sonork: 100.1601457 Thanks Meter: 362	mtk 6225 imei META Initializing... DA_LIB_VER_3.4.1.2 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=16 TXD=18 Connecting...Please hold on the ON/OFF key... Any errors please select another boot and try again. BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Read info...ok, Waitting enter meta... Connected...can release Power button now, tracking... IMEI=135790246811220 IMEI=135790246811220 IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180XXX IMEI=352019048180XXX IMEI=352019048180XXX IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx IMEI=352019048180xxx Rebulid IMEI1=351987047690xxx Rebulid IMEI2=352019048180xxx

07-31-2011, 11:26	#59 (permalink)
mobilecare.vcl No Life Poster Join Date: Jan 2009 Location: KERALA / SWAMI SARANAM Age: 36 Posts: 1,188 Member: 1334005 Status: Offline Sonork: 100.1601457 Thanks Meter: 362	Lg kg-195 formating done

07-31-2011, 11:31	#60 (permalink)
mobilecare.vcl No Life Poster Join Date: Jan 2009 Location: KERALA / SWAMI SARANAM Age: 36 Posts: 1,188 Member: 1334005 Status: Offline Sonork: 100.1601457 Thanks Meter: 362	Lg kg-195 imei done using at Initializing... DA_LIB_VER_3.4.1.2 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=3 TXD=2 Connecting...Please hold on the ON/OFF key... Any errors please select another boot and try again. BB:6226, HardwareVer:8A02, SoftwareVer:8A01 Read info...ok, Waitting enter meta... Connected...can release Power button now, tracking... IMEI=1357902468112XX Rebulid IMEI1=3552120377330XX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-31-2012 20:09
6110 imei changer !!!!!!	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-21-2011 01:44

07-25-2011, 07:46	#48 (permalink)
Hyper Box Freak Poster Join Date: Jun 2011 Location: Coding Hyper-Box Age: 52 Posts: 413 Member: 1600926 Status: Offline Sonork: 100.64977 Thanks Meter: 399	Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=20 TXD=15 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A05, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098000300000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: N66_ABROAD_2CDGB_S5LCD_V1.4.1 Changing baudrate to 921600... Done. Formatting Flash... AutoFormat address: start=0x00E00000, size=0x00200000 All Done

07-25-2011, 08:30	#49 (permalink)
Hyper Box Freak Poster Join Date: Jun 2011 Location: Coding Hyper-Box Age: 52 Posts: 413 Member: 1600926 Status: Offline Sonork: 100.64977 Thanks Meter: 399	Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=3 TXD=2 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A03, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098004900000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: A11+_V07.12.52.H23 Changing baudrate to 921600... Done. Formatting Flash... AutoFormat address: start=0x00E00000, size=0x00200000 All Done

07-25-2011, 08:34	#50 (permalink)
mobilecare.vcl No Life Poster Join Date: Jan 2009 Location: KERALA / SWAMI SARANAM Age: 36 Posts: 1,188 Member: 1334005 Status: Offline Sonork: 100.1601457 Thanks Meter: 362	Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=2 TXD=5 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 00EC240400000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: L5BMM33.9.52.1.2T04M0113_M700 Changing baudrate to 921600... Done. Formatting Flash... AutoFormat address: start=0x00E00000, size=0x00200000 All Done

07-25-2011, 10:02	#51 (permalink)
Hyper Box Freak Poster Join Date: Jun 2011 Location: Coding Hyper-Box Age: 52 Posts: 413 Member: 1600926 Status: Offline Sonork: 100.64977 Thanks Meter: 399	Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=20 TXD=22 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098009E00000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: N.G583.Y70M32.0205.10A1108M.1.0D110408S01 Changing baudrate to 921600... Done. Reading full Flash... Saved file to: C:\Documents and Settings\Razib\Desktop\My Phone All Done.

07-26-2011, 09:36	#52 (permalink)
Hyper Box Freak Poster Join Date: Jun 2011 Location: Coding Hyper-Box Age: 52 Posts: 413 Member: 1600926 Status: Offline Sonork: 100.64977 Thanks Meter: 399

07-26-2011, 15:05	#53 (permalink)
Hyper Box Freak Poster Join Date: Jun 2011 Location: Coding Hyper-Box Age: 52 Posts: 413 Member: 1600926 Status: Offline Sonork: 100.64977 Thanks Meter: 399	Initializing... DA_LIB_VER_3.4.1.2 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=9 TXD=7 Connecting...Please hold on the ON/OFF key... Any errors please select another boot and try again. BB:6223, HardwareVer:8A05, SoftwareVer:8A00 Read info...ok, Waitting enter meta... Connected...can release Power button now, tracking... Code=1122 Code=01728 Code=1440

07-27-2011, 13:59	#55 (permalink)
Hyper Box Freak Poster Join Date: Jun 2011 Location: Coding Hyper-Box Age: 52 Posts: 413 Member: 1600926 Status: Offline Sonork: 100.64977 Thanks Meter: 399

07-28-2011, 06:10	#56 (permalink)
ratheeshkutty Junior Member Join Date: Jun 2008 Location: thrissur Posts: 34 Member: 790398 Status: Offline Thanks Meter: 6	Initializing... DA_LIB_VER_3.4.1.2 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=6 TXD=7 Connecting...Please hold on the POWER key until the red gauge is going... Error: Your software has been restricted. Any errors please select another boot and try again. BB:6253, HardwareVer:8A00, SoftwareVer:8A02 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098009E00000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: L50MM07.9.52.1.2T05M0820_M701 Changing baudrate to 921600... Done. any solution for this.....

07-31-2011, 06:57	#58 (permalink)
Hyper Box Freak Poster Join Date: Jun 2011 Location: Coding Hyper-Box Age: 52 Posts: 413 Member: 1600926 Status: Offline Sonork: 100.64977 Thanks Meter: 399	Initializing... DA_LIB_VER_3.4.1.2 It is sensing the pinout fast,please hold on the phone Power key RXD=3 TXD=2 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6225, HardwareVer:8A03, SoftwareVer:8A00 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0098004900000000 Nand Flash ID: 0000000000000000 Read Hardware Information is done. Config EMI(Nor Flash only)... H/W detection ok. Get Project ID from phone... Project ID: A11+_V07.12.52.H23 Changing baudrate to 230400... Done. Analysis the file, Some file may need a long time... Decryption complete. Key[B234D968127DBA1C]-B9 Downloading Flash file... All Done.