G532F Dead While Flashing [Answered] - GSM-Forum

haadimobiles · 01-15-2020, 12:04

Hello Honorable
I have a G532F in hands and while flashing Stock ROM on it is DEAD now...

any kind of help will be appreciated...

Here are Logs

Code:

Welcome to Octoplus Box Samsung software version 2.8.6.2
Selected BOOT file: D:\Samsung\G532FXWU1AQG5_G532FOJV1AQG5
_KSA (6.0.1)\BL_G532FXWU1AQG5_CL11901177_QB14314032
_REV00_user_low_ship_MULTI_CERT.tar.md5
Selected AP file: D:\Samsung\G532FXWU1AQG5_G532FOJV1AQG5
_KSA (6.0.1)\AP_G532FXWU1AQG5_CL11901177_QB14314032
_REV00_user_low_ship_MULTI_CERT.tar.md5
Selected CP file: D:\Samsung\G532FXWU1AQG5_G532FOJV1AQG5
_KSA (6.0.1)\CP_G532FXXU1AQG5_CL11901177_QB14314032
_REV00_user_low_ship_MULTI_CERT.tar.md5
Selected CSC file: D:\Samsung\G532FXWU1AQG5_G532FOJV1AQG5
_KSA (6.0.1)\CSC_OJV_G532FOJV1AQG5_CL11901177_QB14314032
_REV00_user_low_ship_MULTI_CERT.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G532F into Download Mode, You have to perform the 
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing lk section...
lk section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing tee1 section...
tee1 section has been written successfully.
Writing efuse section...
efuse section has been written successfully.
Writing Firmware Failed
Performed by 2.8.6.2 Software version.

Octopus box · 01-15-2020, 13:40

Hello.

What is exact state of your phone? Why You have decided to re-flash it?

haadimobiles · 01-23-2020, 10:39

Phone was Hang ON logo and even after hard reset its same there on logo

Octopus box · 01-23-2020, 10:44

You can try to repair your device with Medusa Pro Software, this device is supported

MinPin · 01-23-2020, 10:59

I had 4 x G532F's going dead last year when flashing. Really bad hardware on the new G532F models. I don't take these phones for repair anymore.

Octopus box · 01-23-2020, 11:43

Yep, this device has really bad HW, as we can see statistically

01-23-2020, 10:39	#3 (permalink)
haadimobiles Freak Poster Join Date: Aug 2014 Location: Pakistan Posts: 105 Member: 2241683 Status: Offline Thanks Meter: 11	phone was on lgog Phone was Hang ON logo and even after hard reset its same there on logo

01-15-2020, 13:40	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Hello. What is exact state of your phone? Why You have decided to re-flash it?

01-23-2020, 10:44	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	You can try to repair your device with Medusa Pro Software, this device is supported

01-23-2020, 10:59	#5 (permalink)
MinPin Freak Poster Join Date: Oct 2018 Posts: 187 Member: 2869072 Status: Offline Thanks Meter: 107	I had 4 x G532F's going dead last year when flashing. Really bad hardware on the new G532F models. I don't take these phones for repair anymore.

01-23-2020, 11:43	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,848 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Yep, this device has really bad HW, as we can see statistically