G930f dead after reset frp - GSM-Forum

milano · 07-18-2017, 14:10

G930F DEAD AFTER RESET FRP

elcome to Octoplus/Octopus Box Samsung software version 2.5.6
-----------------------------------------------------------------------------------
To connect SM-G930F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G930F
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM85
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.5.6 Software version.

Octopus box · 07-18-2017, 14:17

Hello.

Please explain "dead" in more details. Try to charge phone battery then check whether it powers on, or enters download mode.

mohammadhadi · 07-18-2017, 15:37

Hi
Maybe this help you:
press and hold vol down+power for 20 seconds

milano · 07-18-2017, 20:16

Quote:

Originally Posted by mohammadhadi

Hi
Maybe this help you:
press and hold vol down+power for 20 seconds

note work
note charging
not downlaod mode

Alameeen · 07-18-2017, 22:02

Quote:

Originally Posted by milano

note work
note charging
not downlaod mode

Bros u are in big bad not happy sorry about it

milano · 07-19-2017, 22:08

After a day of rest phone works by itself

sky73 · 07-20-2017, 06:48

Quote:

Originally Posted by milano

After a day of rest phone works by itself

Thank you for let us know
Good report

07-18-2017, 14:10	#1 (permalink)
milano No Life Poster Join Date: Nov 2005 Posts: 641 Member: 201840 Status: Offline Thanks Meter: 55	G930f dead after reset frp G930F DEAD AFTER RESET FRP elcome to Octoplus/Octopus Box Samsung software version 2.5.6 ----------------------------------------------------------------------------------- To connect SM-G930F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-G930F Please put the phone into Download Mode and connect USB cable. Waiting for phone... Reading PIT... PIT was read successfully. Searching for UART interface.. COM85 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP / Reactivation lock is successfully reseted! Performed by 2.5.6 Software version.

07-18-2017, 14:17	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,847 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Hello. Please explain "dead" in more details. Try to charge phone battery then check whether it powers on, or enters download mode.

07-18-2017, 15:37	#3 (permalink)
mohammadhadi No Life Poster Join Date: May 2006 Location: iran,isfahan Posts: 549 Member: 269202 Status: Offline Thanks Meter: 281	Hi Maybe this help you: press and hold vol down+power for 20 seconds

07-19-2017, 22:08	#6 (permalink)
milano No Life Poster Join Date: Nov 2005 Posts: 641 Member: 201840 Status: Offline Thanks Meter: 55	After a day of rest phone works by itself