shv-e160s unlock help. [Solved] - GSM-Forum

dArk_gsm · 11-10-2012, 09:25

hello.

i have a shv-e160s for unlock.

locked from korea.

need for beta test thanks.

dArk_gsm · 11-11-2012, 10:32

hello

any update for beta test unlocking?

thanks.

amar85 · 11-11-2012, 10:44

Quote:

Originally Posted by dArk_gsm

hello

any update for beta test unlocking?

thanks.

download latest version brother

SHV-E160K - added Write Firmware, Repair IMEI, Read/Write/Repair NVM.
SHV-E160S - added Write Firmware, Repair IMEI, Read/Write/Repair NVM.
708SC - added Direct Unlock, Write Firmware, Write Security, Read/Write/Repair NVM.
GT-S5690R - added Direct Unlock, Write Firmware, Repair IMEI,
Reset Screen Lock (included Reset Pattern, Pin and Password Locks).
GT-S7562 - added world's first Repair IMEI B (second IMEI).
GT-S7562I - added Direct Unlock, Write Firmware, Repair IMEI (A/B) (world's first Repair IMEI B),
Read/Write/Repair NVM.
GT-E1055G - added Read Codes, Write Firmware, Repair IMEI, Read/Write Full Flash,
Read/Write EEPROM (thanks to Mr. Abishalom).
GT-E1055T - added Read Codes, Write Firmware, Repair IMEI, Read/Write Full Flash,
Read/Write EEPROM (thanks to Mr. Abishalom).
GT-I9300, GT-I9300C, GT-I9300T - improved Repair EFS procedure.

Octopus box · 11-11-2012, 10:50

Hello.
What type of lock is present in your phone? Please contact us tomorrow, we will try to prepare test version for You.

dArk_gsm · 11-11-2012, 11:26

locked from korea.

if you have a beta software pls send via pm the link software.

thank you.

connn · 11-11-2012, 12:10

Quote:

Originally Posted by dArk_gsm

locked from korea.

if you have a beta software pls send via pm the link software.

thank you.

Please wait...............

dArk_gsm · 11-13-2012, 06:20

how to put in usb diag because *#9090# not working.

so i cant connect the phone.

thanks.

Octopus box · 11-13-2012, 11:00

Hello.
Please try to re-flash the phone with the firmware from the support area and try again.

ZiDanRO · 11-13-2012, 17:19

If *#9090# dosen't work try first if you have any IMEI or the EFS partition it is pressent. Becouse many samsung phones when you don't have imei (baseband Unknow when you input *#1234# ) that is why the code *#9090# don't work.

dArk_gsm · 11-14-2012, 04:57

Quote:

Originally Posted by ZiDanRO

If *#9090# dosen't work try first if you have any IMEI or the EFS partition it is pressent. Becouse many samsung phones when you don't have imei (baseband Unknow when you input *#1234# ) that is why the code *#9090# don't work.

hello.

when i dial *#1234#

RESULT:

pda:e160s.UG06.1737

PHONE:UKNOWN

MOVINAND:UG06

BUILD INFO: FRI JULY 6 17:46:52 KST 2012.

@octopusbox.

after flash whats next?

thanks.

Octopus box · 11-14-2012, 07:16

Have You re-flashed the phone? Please post here full software log.

ZiDanRO · 11-14-2012, 19:42

Quote:

Originally Posted by dArk_gsm

hello.

when i dial *#1234#

RESULT:

pda:e160s.UG06.1737

PHONE:UKNOWN

MOVINAND:UG06

BUILD INFO: FRI JULY 6 17:46:52 KST 2012.

@octopusbox.

after flash whats next?

thanks.

From what I see if you have Phone: Unknown then you don't have IMEI. So you phone dosen't need to unlock it needs IMEI repaire.

No IMEI -> Phone Unknown -> the code *#9090# dosen't work.

dArk_gsm · 11-15-2012, 04:01

Quote:

Originally Posted by Octopus box

Have You re-flashed the phone? Please post here full software log.

hello.

1 file only in support area.

E160S.UH24.1912_CL966809_REV02_ROOTED.oct

rooted this is the firmware?

after flash whats next?

thanks.

dArk_gsm · 11-15-2012, 05:57

whats next sir complete flash

Quote:

Welcome to Octopus Box Samsung software version 1.6.9
-----------------------------------------------------------------------------------
To connect SHV-E160S phone you have to perform the following
steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "996412" password.
4. Go to System->SIO mode.
5. Select "Modem" radio button for USB section.
6. Go to dial window.
7. Enter "*#9090#" number.
8. Set "Diag config" to "USB" value.
9. Restart phone.
10. Press "Read Info" in Octopus Samsung software.
Selected firmware file: E160S.UH24.1912_CL966809_REV02
_ROOTED.oct
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: SHV-E160S
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM3
Phone connection failed
Please switch your phone to the download mode and connect it to a
PC.
To put SHV-E160S phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Writing firmware Canceled
Please switch your phone to the download mode and connect it to a
PC.
To put SHV-E160S phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Firmware writing successfully completed.

thanks.

Octopus box · 11-15-2012, 07:00

Quote:

how to put in usb diag because *#9090# not working.

Does this combination now work (afrer You have written firmware)?

11-10-2012, 09:25	#1 (permalink)
dArk_gsm Junior Member Join Date: Nov 2012 Posts: 31 Member: 1835221 Status: Offline Sonork: 1622861 Thanks Meter: 3	shv-e160s unlock help. [Solved] hello. i have a shv-e160s for unlock. locked from korea. need for beta test thanks. Last edited by Octopus box; 07-02-2013 at 11:02.

11-11-2012, 10:32	#2 (permalink)
dArk_gsm Junior Member Join Date: Nov 2012 Posts: 31 Member: 1835221 Status: Offline Sonork: 1622861 Thanks Meter: 3	hello any update for beta test unlocking? thanks.

11-11-2012, 10:50	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,835 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. What type of lock is present in your phone? Please contact us tomorrow, we will try to prepare test version for You.

11-11-2012, 11:26	#5 (permalink)
dArk_gsm Junior Member Join Date: Nov 2012 Posts: 31 Member: 1835221 Status: Offline Sonork: 1622861 Thanks Meter: 3	locked from korea. if you have a beta software pls send via pm the link software. thank you.

11-13-2012, 06:20	#7 (permalink)
dArk_gsm Junior Member Join Date: Nov 2012 Posts: 31 Member: 1835221 Status: Offline Sonork: 1622861 Thanks Meter: 3	how to put in usb diag because *#9090# not working. so i cant connect the phone. thanks.

11-13-2012, 11:00	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,835 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. Please try to re-flash the phone with the firmware from the support area and try again.

11-13-2012, 17:19	#9 (permalink)
ZiDanRO No Life Poster Join Date: Feb 2012 Location: Romania Age: 41 Posts: 636 Member: 1722871 Status: Offline Thanks Meter: 116	If #9090# dosen't work try first if you have any IMEI or the EFS partition it is pressent. Becouse many samsung phones when you don't have imei (baseband Unknow when you input #1234# ) that is why the code *#9090# don't work.

11-14-2012, 07:16	#11 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,835 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Have You re-flashed the phone? Please post here full software log.