GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octopus Samsung/Octoplus Samsung


Reply
 
LinkBack Thread Tools Display Modes
Old 07-23-2014, 13:51   #1 (permalink)
No Life Poster
 
Join Date: Oct 2010
Location: colombo
Posts: 2,341
Member: 1418524
Status: Offline
Thanks Meter: 186
GT-I9301I unlock Done No network


Welcome to Octoplus/Octopus Box Samsung software version 1.6.2
-----------------------------------------------------------------------------------
To connect GT-I9301I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Phone IMEI: 352750-06-015692-8
SW version: M8626A-AAAANAZM-1.0.4044
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
ADB server killed.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone unlocking failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM160
Selected model: GT-I9301I
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM159
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Phone IMEI: 352750-06-015692-8
SW version: M8626A-AAAANAZM-1.0.4044
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Detected phone model: GT-I9301I
Firmware compiled date: Sat Mar 22 04:16:57 KST 2014
PDA version: I9301IXXUANC6
CSC version: I9301IITVAND2
SW version: I9301IXXUANC6
Phone IMEI: 352750060156928
Phone SN: RV1F503ZB2V
Android version: 4.4.2 (KOT49H)
Cheking Root
Phone is Rooted
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-I9301I-352750060156928-23-07-2014_18-04-
44-.asec file
Deactivating MSL...
MSL deactivate successfully
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait for 1-2 minutes.
3. Connect phone via UART cable to the Box.
4. Note: phone screen must be active
Connecting to phone, please wait...
Found more then one box connected to COM3
Found phone on COM3
Phone connected successfully
Unlocking phone. This can take some time. Please wait...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: GT-I9301I
Mode: Emergency
NVM can’t be repaired for GT-I9301I phone in emergency mode
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Phone IMEI: 352607-06-013755-7
SW version: M8626A-AAAANAZM-1.0.4044
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Phone IMEI: 352607-06-013755-7
SW version: M8626A-AAAANAZM-1.0.4044
Creating NVM backup
Reading NVM done!
Repairing NVM for GT-I9301I phone...
NVM repair completed successfully
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Phone IMEI: 352607-06-013755-7
SW version: M8626A-AAAANAZM-1.0.4044
Creating NVM backup
Reading NVM done!
Writing NVM...
NVM writing completed successfully
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Phone IMEI: 352607-06-013755-7
SW version: M8626A-AAAANAZM-1.0.4044
Creating NVM backup
Reading NVM done!
Repairing NVM for GT-I9301I phone...
NVM repair completed successfully
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Phone IMEI: 352607-06-013755-7
SW version: M8626A-AAAANAZM-1.0.4044
Repairing 3G/4G...
Reading nv...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\NV-GT-I9301I-352607060137557-23-07-2014_18-28-17-.nv
file
3G/4G repair successfully
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Detected phone model: GT-I9301I
Firmware compiled date: Sat Mar 22 04:16:57 KST 2014
PDA version: I9301IXXUANC6
CSC version: I9301IITVAND2
SW version: I9301IXXUANC6
Phone IMEI: 352607060137557
Phone SN: RV1F503ZB2V
Android version: 4.4.2 (KOT49H)
Cheking Root
Phone is Rooted
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-I9301I-352607060137557-23-07-2014_18-35-
04-.asec file
Deactivating MSL...
MSL deactivate successfully
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait for 1-2 minutes.
3. Connect phone via UART cable to the Box.
4. Note: phone screen must be active
Connecting to phone, please wait...
Found more then one box connected to COM3
Found phone on COM3
Phone connected successfully
Writing new phone IMEI...
IMEI successfully repaired.
Please, restart the phone to apply changes

Last edited by Octopus box; 07-23-2014 at 14:43.
  Reply With Quote
Old 07-23-2014, 14:42   #2 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,847
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
After performing the "Unlock" or "Repair IMEI" operation, You need to make "Repair 3G/4G" network and write the first NVM backup, which has been created by Software (or by You) before performing the "Unlock" or "Repair IMEI" operation. Then You should insert SIM card and wait 5-15 minutes until network will appears.

Also, look here:
http://forum.gsmhosting.com/vbb/f684...-done-1840228/,
http://forum.gsmhosting.com/vbb/f684...-root-1839755/,
http://forum.gsmhosting.com/vbb/10441093-post36.html.
  Reply With Quote
Old 08-01-2014, 14:01   #3 (permalink)
No Life Poster
 
Join Date: Oct 2010
Location: colombo
Posts: 2,341
Member: 1418524
Status: Offline
Thanks Meter: 186
hi sir
now this phone factory unlock
now no network
now have a phone super imei 352607060137557
how to write my original phone imei

i try backup security write
Platform: Samsung Android
Selected port: COM159
Selected model: GT-I9301I
Detected phone model: GT-I9301I
Firmware compiled date: Sat Mar 22 04:16:57 KST 2014
PDA version: I9301IXXUANC6
CSC version: I9301IITVAND2
SW version: I9301IXXUANC6
Phone IMEI: 352607060137557
Phone SN: RV1F503ZB2V
Android version: 4.4.2 (KOT49H)
Writing security failed.
  Reply With Quote
Old 08-01-2014, 14:08   #4 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,847
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
In order to restore phone's original IMEI You need to write security backup, that was made during first Unlock operation: "C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-I9301I-352750060156928-23-07-2014_18-04-
44-.asec"

For this operation phone must be rooted.
  Reply With Quote
Old 08-31-2014, 16:20   #5 (permalink)
Insane Poster
 
Join Date: Sep 2007
Location: jeddah
Posts: 90
Member: 591475
Status: Offline
Thanks Meter: 10
i9301i imie can't write on the phone? octoplus 1.6.1
sir, what's the problem i've done already the proper way.

Deactivating MSL...
MSL deactivate successfully
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait for 1-2 minutes.
3. Connect phone via UART cable to the Box.
4. Note: phone screen must be active
Connecting to phone, please wait...
Found more then one box connected to COM3
Found phone on COM3
Phone connected successfully
IMEI successfully repaired.
Please, restart the phone to apply changes
imie:blank or unknown.(*#06)
  Reply With Quote
Old 09-01-2014, 06:31   #6 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,847
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
Post here full Software log with the Repair IMEI operation.

What is the baseband version and state in your device? Please read out phone's info via ADB (press "Read info" button at "Android / EFS manager" tab in the Software) and post here full Software log with this info.
  Reply With Quote
Old 12-24-2014, 10:14   #7 (permalink)
Junior Member
 
Join Date: Dec 2008
Posts: 1
Member: 935944
Status: Offline
Sonork: 468200
Thanks Meter: 0
i i9301i nvm backup and security backup share ? no kamera no wifi no network id.
  Reply With Quote
Old 12-24-2014, 10:19   #8 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,847
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
Do exactly the next:

1. Write firmware "I9301IXXUANC6_I9301IITVAND2_I9301IXXUANC6_HOM E" from the Support Area.
2. Re-start the phone.
3. Root the phone by using TowelRoot.
4. Make Unlock.
5. Make Repair 3G/4G.
6. Restart the phone.
7. Write this NVM backup https://mega.co.nz/#!X4YDFaAI!w_ZQUT...Rh7QvZxtt9znqA.
8. Insert SIM card, wait 5-10 minutes and try to find and select network manually.
9. Write here the result.
  Reply With Quote
Old 12-28-2014, 14:36   #9 (permalink)
Junior Member
 
Join Date: Dec 2014
Posts: 18
Member: 2317562
Status: Offline
Thanks Meter: 0
repair imie

Hello
About i9301i I want to put a number imie do not want to use service imie
How?
Please help
  Reply With Quote
Old 12-28-2014, 14:41   #10 (permalink)
No Life Poster
 
GSMFEROZEPUR's Avatar
 
Join Date: Mar 2013
Location: India
Age: 29
Posts: 971
Member: 1900418
Status: Offline
Sonork: Not Available Yet
Thanks Meter: 93
Donate money to this user
Hlo Mr first off all root ur phone,After Root Unlock Ur Phone If Successfully ,Then Repair 3G-4G Network Repair i m already done this job
  Reply With Quote
Old 12-28-2014, 14:47   #11 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,847
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
@ yaserko

Hello.
Quote:
About i9301i I want to put a number imie do not want to use service imie
Unfortunately, currently no solution, how to write any IMEI, which You want, and get active network.
  Reply With Quote
The Following User Says Thank You to Octopus box For This Useful Post:
Old 12-28-2014, 14:50   #12 (permalink)
No Life Poster
 
GSMFEROZEPUR's Avatar
 
Join Date: Mar 2013
Location: India
Age: 29
Posts: 971
Member: 1900418
Status: Offline
Sonork: Not Available Yet
Thanks Meter: 93
Donate money to this user
I9301 Repair Network Done - Download - 4shared - Octoplus
  Reply With Quote
Old 01-10-2015, 09:23   #13 (permalink)
No Life Poster
 
rakib_sheak's Avatar
 
Join Date: Jan 2010
Location: Bangladesh
Posts: 794
Member: 1201843
Status: Offline
Thanks Meter: 487
Quote:
Originally Posted by GSMFEROZEPUR View Post

need help urjent net provlrm
  Reply With Quote
Old 01-10-2015, 09:27   #14 (permalink)
Product Supporter
 
Octopus box's Avatar
 
Join Date: Oct 2009
Location: Romania, Bucharest
Posts: 99,847
Member: 1146942
Status: Offline
Sonork: 100.1587278
Thanks Meter: 27,413
Do exactly the next:

1. Write firmware "I9301IXXUANC6_I9301IITVAND2_I9301IXXUANC6_HOM E" from the Support Area.
2. Re-start the phone.
3. Root the phone by using TowelRoot.
4. Make Unlock.
5. Make Repair 3G/4G.
6. Restart the phone.
7. Write this NVM backup https://mega.co.nz/#!X4YDFaAI!w_ZQUT...Rh7QvZxtt9znqA.
8. Insert SIM card, wait 5-10 minutes and try to find and select network manually.
9. Write here the result.
  Reply With Quote
Old 01-12-2015, 11:43   #15 (permalink)
Junior Member
 
Join Date: Apr 2012
Location: Kiev
Posts: 6
Member: 1743802
Status: Offline
Thanks Meter: 1
Hello! i unlocked phone successfully, but have camera trouble.
if I open camera app i see next error: "Server error occured. Restart Camera".
  Reply With Quote
The Following User Says Thank You to andrew.xardas For This Useful Post:
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:39.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.30078 seconds with 8 queries

SEO by vBSEO