How to repair IMEI in GT-S5380d?

[tekirdaggsm]

tried flashes : S5380D_for_Unlock_and_IMEI_Repair.oct

GT-S5380_for_Unlock_and_IMEI_Repair.oct (after flash freezes the phone btw mot wroking.)

Platform: Samsung Broadcom
Selected port: COM69
Selected model: GT-S5380
Port is busy
Phone was not found on the selected port!
Selected firmware file: S5380D_for_Unlock_and_IMEI_Repair.oct
Please switch your phone to the download mode and connect it to a 
PC.
To put GT-S5380 phone into download mode you have to perform the 
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume-" +"Power"+''Home"  buttons.
Searching for a phone. Please wait...
Found phone on COM69
Firmware write started.
Writing BOOT\BCMBOOT section...
Writing BOOT\BOOT2 section...
Writing BOOT\DROM_DSP section...
Writing BOOT\PATCH_DSP section...
Writing BOOT\SYSPARM_DEP section...
Writing BOOT\SYSPARM_IND section...
Writing BOOT\NVRAM6 section...
Phone will restart now. Please don't disconnect cable!
Writing AMSS section...
AMSS section has been written successfully.
Writing APPS section...
APPS section has been written successfully.
Writing RSRC1 section...
RSRC1 section has been written successfully.
Writing RSRC2 section...
RSRC2 section has been written successfully.
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing SHPAPP section...
SHPAPP section has been written successfully.
Writing FOTA section...
FOTA section has been written successfully.
Phone will restart now
Firmware writing successfully completed.

-----------------------------------------------------------------------------------

com port writing :

Platform: Samsung Broadcom
Selected port: COM5
Selected model: GT-S5380
Detected phone model: GT-S5380
SW version: S5380DXXKK4/S5380DOXEKJ3
HW Version: GT-S5380SSDKOR
Old IMEI A: 354732-02-*****-8
New IMEI A: 353496-01-*****-3
Writing new phone IMEI A...
IMEI successfully repaired.
Please, restart the phone to apply changes

--------------------------------------------------------------------------

usb port writing

Platform: Samsung Broadcom
Selected port: COM30
Selected model: GT-S5380D
Detected phone model: GT-S5380D
SW version: S5380DXXKK4/S5380DOXEKJ3
HW Version: GT-S5380SSDKOR
Old IMEI A: 354732-02-*****-8
New IMEI A: 353496-01-*****-3
Writing new phone IMEI A...
IMEI successfully repaired.
Please, restart the phone to apply changes

says done but when type *#06# old imei 354732-02-*****-8 is here after restart the phone.

tried other posts not solve my problem :
http://forum.gsmhosting.com/vbb/f684...olved-1647797/

http://forum.gsmhosting.com/vbb/f684...oblem-1768234/

http://forum.gsmhosting.com/vbb/f684...ml#post9252429

[Octopus box]

Hello.

If your phone model is GT-S5380d, not GT-S5380, please select phone model GT-S5380d in the list and check (select) "Manual select" option - this is important and repeat the operation again. As You can see from your Software log, You have performed Repair IMEI operation, as for GT-S5380:

Selected model: GT-S5380

Algorithms for Repair IMEI for GT-S5380 and GT-S5380d has some differenses.

So, please do exactly the next:
1. Write the special firmware "S5380D_for_Unlock_and_IMEI_Repair.oct".
2. Re-start the phone.
3. Select GT-S5380d in the list.
4. Check (select) "Manual select" option in Software.
5. Enter correct IMEI.
6. Click "IMEI fix" button.
7. Follow software instructions (prompts).
8. Post here full Software log with all of this actions.