I9300 flashing error 4.0.4

[amar85]

To connect GT-I9300 phone you have to perform the following steps:
I1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in Octopus Samsung software.
Selected firmware file: I9300BUALF1_I9300VFGALF1_I9300BULF1_HOME.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-I9300 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
W3. When phone turns on press "Volume+" button.
IFound phone on
Firmware write started.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing Firmware Failed

[Octopus box]

Hello.
What was the state of your phone before You have tried to write firmware (what was the problem)?
Please try to re-flash the phone with another firmware.

[amar85]

Originally Posted by Octopus box

Hello.
What was the state of your phone before You have tried to write firmware (what was the problem)?
Please try to re-flash the phone with another firmware.

phone is working 10000%

problem is need to downgrade from 4.1.1 to 4.04

anyway thank for reply

allready solved by odin