i9300i udc start - GSM-Forum

zarar · 04-18-2016, 17:46

Please put the phone into Download Mode and connect USB cable.
To put GT-I9300I into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing Firmware Failed
Performed by 2.2.4 software version

secure download | ENABLE

UDC START

help ....................................

Octopus box · 04-18-2016, 17:54

Hello.

Please fully charge phone's battery, then try to write Android 4.4.4 firmware from the Support Area.

zarar · 04-20-2016, 07:52

battery was fully charged but still same any other solution

Octopus box · 04-20-2016, 11:25

Try to write different firmwares one by one. If problem will remain the same - please check phone's HW.

04-18-2016, 17:46	#1 (permalink)
zarar Freak Poster Join Date: Aug 2009 Posts: 181 Member: 1092372 Status: Offline Thanks Meter: 32	i9300i udc start Please put the phone into Download Mode and connect USB cable. To put GT-I9300I into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing ABOOT section... ABOOT section has been written successfully. Writing Firmware Failed Performed by 2.2.4 software version secure download \| ENABLE UDC START help ....................................

04-20-2016, 07:52	#3 (permalink)
zarar Freak Poster Join Date: Aug 2009 Posts: 181 Member: 1092372 Status: Offline Thanks Meter: 32	i9300i udc start battery was fully charged but still same any other solution

04-18-2016, 17:54	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,846 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Hello. Please fully charge phone's battery, then try to write Android 4.4.4 firmware from the Support Area.

04-20-2016, 11:25	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,846 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,412	Try to write different firmwares one by one. If problem will remain the same - please check phone's HW.