model: SM-N910T - GSM-Forum

degnanf · 04-25-2015, 16:14

Welcome to Octoplus/Octopus Box Samsung software version 1.9.3
-----------------------------------------------------------------------------------
To connect SM-N910T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM10
Selected model: SM-N910T
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM35
Mode: Normal
Phone model: SM-N910T
Firmware compiled date: Oct 17 2014
Firmware compiled time: 17:00:00
Firmware released date: Nov 11 2014
Firmware released time: 19:36:24
Phone IMEI: 354594-06-xxxxx-x
SW version: MPSS.DI.3.0.c5-00300-M9625TAARANAZM-1.7386.2
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM35
Selected model: SM-N910T
Reading info...
Mode: Normal
Firmware compiled date: Oct 17 2014
Firmware compiled time: 17:00:00
Firmware released date: Nov 11 2014
Firmware released time: 19:36:24
SW Version: MPSS.DI.3.0.c5-00300-M9625TAARANAZM-1.7386.2
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-N910T
Firmware compiled date: Thu Nov 13 17:59:11 KST 2014
PDA version: N910TUVU1ANK4
CSC version: N910TTMB1ANK4
SW version: N910TUVU1ANK4
Phone IMEI: 35459406xxxxxxxx
Phone SN: RF8FC090Q4X
Android version: 4.4.4 (KTU84P)
Unlocking phone...
Phone will restart now. Please don't disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu (don't disconnect the battery!)

04-25-2015, 16:14	#1 (permalink)
degnanf Freak Poster Join Date: Jul 2010 Location: Honduras Posts: 355 Member: 1353903 Status: Offline Sonork: 100.1659096 Thanks Meter: 92	model: SM-N910T Welcome to Octoplus/Octopus Box Samsung software version 1.9.3 ----------------------------------------------------------------------------------- To connect SM-N910T phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-N910T Port is busy Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM35 Mode: Normal Phone model: SM-N910T Firmware compiled date: Oct 17 2014 Firmware compiled time: 17:00:00 Firmware released date: Nov 11 2014 Firmware released time: 19:36:24 Phone IMEI: 354594-06-xxxxx-x SW version: MPSS.DI.3.0.c5-00300-M9625TAARANAZM-1.7386.2 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM35 Selected model: SM-N910T Reading info... Mode: Normal Firmware compiled date: Oct 17 2014 Firmware compiled time: 17:00:00 Firmware released date: Nov 11 2014 Firmware released time: 19:36:24 SW Version: MPSS.DI.3.0.c5-00300-M9625TAARANAZM-1.7386.2 Please, press "OK" button on the phone to allow USB debugging.. Detected phone model: SM-N910T Firmware compiled date: Thu Nov 13 17:59:11 KST 2014 PDA version: N910TUVU1ANK4 CSC version: N910TTMB1ANK4 SW version: N910TUVU1ANK4 Phone IMEI: 35459406xxxxxxxx Phone SN: RF8FC090Q4X Android version: 4.4.4 (KTU84P) Unlocking phone... Phone will restart now. Please don't disconnect cable! Phone is successfully unlocked To finish the operation, please restart the phone via phone's menu (don't disconnect the battery!)