need help for rmm lock [Answered] - GSM-Forum

IQA_SHAHEEN · 09-12-2019, 21:28

i have j600f in hands from last three days i got set to remove frp at that time rmm state is prenormal i flashed combination firmware of u3 binary and succeesfully removed frp then i flash stock firmware from support after this phone is on bootloop shows only j6 and then restart plz help me if i flash andorid 9.0 on this boots up or not??? tell me this please help me out team

Code:

Welcome to Octoplus Box Samsung software version 2.8.2
Selected BOOT file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\BL_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship.tar.md5
Selected AP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\AP_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship_meta.tar.md5
Selected CP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CP_J600FXXU3ASA1_CP11642233
_CL15236602_QB21619399_REV00_user_low_ship.tar.md5
Selected CSC file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CSC_OMC_OJM_J600FOJM3ASA1
_CL15236602_QB21619362_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J600F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Writing firmware Canceled
Performed by 2.8.2 Software version.
Selected PIT file: H:\Z3X\FLASH FILES\SM-J600F\J600F  PIT File By 
(Support.**************)\SM-J600F_19-3-2019_21-0-33.pit
Selected BOOT file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\BL_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship.tar.md5
Selected AP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\AP_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship_meta.tar.md5
Selected CP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CP_J600FXXU3ASA1_CP11642233
_CL15236602_QB21619399_REV00_user_low_ship.tar.md5
Selected CSC file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CSC_OMC_OJM_J600FOJM3ASA1
_CL15236602_QB21619362_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J600F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing PIT section...
Writing Firmware Failed
Performed by 2.8.2 Software version.
Selected BOOT file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\BL_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship.tar.md5
Selected AP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\AP_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship_meta.tar.md5
Selected CP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CP_J600FXXU3ASA1_CP11642233
_CL15236602_QB21619399_REV00_user_low_ship.tar.md5
Selected CSC file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CSC_OMC_OJM_J600FOJM3ASA1
_CL15236602_QB21619362_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J600F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing VENDOR section...
VENDOR section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CP_DEBUG section...
CP_DEBUG section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing OMR section...
OMR section has been written successfully.
Writing ODM section...
ODM section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.8.2 Software version.
Selected BOOT file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\BL_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship.tar.md5
Selected AP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\AP_J600FXXU3ASA1_CL15236602
_QB21619362_REV00_user_low_ship_meta.tar.md5
Selected CP file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CP_J600FXXU3ASA1_CP11642233
_CL15236602_QB21619399_REV00_user_low_ship.tar.md5
Selected CSC file: H:\Z3X\FLASH FILES\SM-J600F\J600FXXU3ASA1
_J600FOJM3ASA1_PAK\CSC_OMC_OJM_J600FOJM3ASA1
_CL15236602_QB21619362_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J600F into Download Mode, You have to perform the 
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM25
Selected model: SM-J600F
Operation: RMM Unlock
Proper android device not found. Make sure that "USB debug" option on 
the device is turned on.
RMM is successfully unlocked
Performed by 2.8.2 Software version.
-----------------------------------------------------------------------------------
Connecting to server...
Username: mudassir
Authorizing...
Checking balance...
Your balance: 100 credits.
Performed by 2.8.2 Software version.

regards
iqa_shaheen

Octopus box · 09-13-2019, 08:41

Hello.

Try to reflash your device with latest firmware version

IQA_SHAHEEN · 09-13-2019, 09:24

Quote:

Originally Posted by Octopus box

Hello.

Try to reflash your device with latest firmware version

If i flash my phone with latest firmware does my phone boots up or not??? Look currently i am on u3 binary and i have combination of u3 also but if i flash this with latest the binary got also updated noway to downgrade please answer me
Regards
Iqa_Shaheen

rajufzr · 09-13-2019, 09:30

flash with same region file
select csc and not home csc
tested

IQA_SHAHEEN · 09-13-2019, 13:31

Quote:

Originally Posted by rajufzr

flash with same region file
select csc and not home csc
tested

i have flashed same region file to it and i always flash csc to any phone i never flash home csc and please team reply me

regards
iqa_shaheen

Octopus box · 09-13-2019, 13:34

Then try to reflash your device with stock U3 firmware version

IQA_SHAHEEN · 09-13-2019, 14:17

Quote:

Originally Posted by Octopus box

Then try to reflash your device with stock U3 firmware version

i have flashed it almost 5 times but phone is working fine on combination fimware but not on stock fimware any other help

regards
iqa_shaheen

IQA_SHAHEEN · 09-13-2019, 20:00

please team special help required
regards
Iqa_Shaheen

Zain Ul Abideen · 09-13-2019, 20:23

Quote:

i have flashed it almost 5 times but phone is working fine on combination fimware but not on stock fimware any other help

Hello Dear.

Please write full combination when phones turn on completely and put your phone into Download mode then just flash these files from original stock firmware sboot, boot , recovery and system don't do anything let the phones turn on completely thanks and tell us your report again.

Best Regards.
Zain UL Abideen

IQA_SHAHEEN · 09-14-2019, 16:23

Quote:

Originally Posted by Zain Ul Abideen

Hello Dear.

Please write full combination when phones turn on completely and put your phone into Download mode then just flash these files from original stock firmware sboot, boot , recovery and system don't do anything let the phones turn on completely thanks and tell us your report again.

Best Regards.
Zain UL Abideen

i am on andorid 9 J600FXXU3BSD6 this version is there is any harm flashing this
COMBINATION_FAC_FA80_J600GFDDU1ARH1_FACFA80_J600GF ODI1ARH1_CL13594070_QB19247763_REV00_user_mid_nosh ip.tar which is available on octopus

regards
Iqa_Shaheen

IQA_SHAHEEN · 09-14-2019, 16:55

Quote:

Originally Posted by Zain Ul Abideen

Hello Dear.

Please write full combination when phones turn on completely and put your phone into Download mode then just flash these files from original stock firmware sboot, boot , recovery and system don't do anything let the phones turn on completely thanks and tell us your report again.

Best Regards.
Zain UL Abideen

i have flashed COMBINATION_FAC_FA80_J600FXXU3ASB1 this after that i flashed sboot boot recovery & system from stock original version J600FXXU3BSD6_J600FOJM3BSD6_PAK but still same stuck on boot loop please help

regards
Iqa_Shaheen

Zain Ul Abideen · 09-14-2019, 18:08

Quote:

still same stuck on boot loop please help

Hello Dear.

As my openion first you should try different repair firmware 4 files in U3 same bootloader if it didn't work then go to second step,
Find in google repair firmware 4 files in U4 and don't afraid U4 is not high security you can bypass frp in 9.0 U4 bootloader version i hope it will work for you tell us your report again thanks.

Best Regards.
Zain UL Abideen

IQA_SHAHEEN · 09-14-2019, 20:08

Quote:

Originally Posted by Zain Ul Abideen

Hello Dear.

As my openion first you should try different repair firmware 4 files in U3 same bootloader if it didn't work then go to second step,
Find in google repair firmware 4 files in U4 and don't afraid U4 is not high security you can bypass frp in 9.0 U4 bootloader version i hope it will work for you tell us your report again thanks.

Best Regards.
Zain UL Abideen

i have bypass frp already i am afraid of that i update this to u4 how can i come back to u3 if solution of this is in u3 if all instructions you gave are failed

regards
Iqa_Shaheen

Zain Ul Abideen · 09-14-2019, 20:20

Quote:

how can i come back to u3 if solution of this is in u3

Sorry Dear.

There is no way to downgrade your phone to previous bootloader after update, i am not sure but maybe your problem can fix in u4 in repair firmware thanks.

Best Regards.
Do Help And Get Help

IQA_SHAHEEN · 09-14-2019, 23:39

Quote:

Originally Posted by Zain Ul Abideen

Sorry Dear.

There is no way to downgrade your phone to previous bootloader after update, i am not sure but maybe your problem can fix in u4 in repair firmware thanks.

Best Regards.
Do Help And Get Help

If You Have Any Link Of U4 Repair Firmware Please Share It With Me

Regards
Iqa_Shaheen

09-13-2019, 08:41	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Hello. Try to reflash your device with latest firmware version

09-13-2019, 09:30	#4 (permalink)
rajufzr No Life Poster Join Date: Feb 2005 Location: MX-KEY is the BEST NOKIA TOOL Age: 50 Posts: 875 Member: 116314 Status: Offline Thanks Meter: 147	flash with same region file select csc and not home csc tested

09-13-2019, 13:34	#6 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,841 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,411	Then try to reflash your device with stock U3 firmware version

09-13-2019, 20:00	#8 (permalink)
IQA_SHAHEEN No Life Poster Join Date: Nov 2010 Location: pakistan Posts: 527 Member: 1453428 Status: Offline Sonork: 100.1596919 Thanks Meter: 146	please team special help required regards Iqa_Shaheen