🐙 Octoplus / Octopus Box Samsung v.2.3.7 - reset FRP boost! 🐙

[MaciekD]

wow its work fine on android 5.1.1, my j320fn FRP is off. Thanx

[snmobilecenter]

Thanks Team for great work ... but not finding few models like J510gn...., Please try to add unlock operation too for new models.

[gmjony]

how to choose corect combination file?

[snmobilecenter]

Originally Posted by slam4neon

how can we activate adb if its not active in phone,
phone already got frp on it .

Read carefully brother ...

[snmobilecenter]

Originally Posted by gmjony

how to choose corect combination file?

Go to support , find your model combination and flast it ..

[Octopus box]

I have a510f whit android 6.0.1 when i write combination file download whit support octopus my phone is stock in logo/

i have same issue ! a510f rebooting after downloading frp file, im currently on 6.0.1

Note: "boot.img" from combination firmware can be not compatible with current phone's firmware. In that case phone will stuck on logo, or will be rebooting after writing of such boot. To restore the phone to its initial condition you need to re-flash it with different full stock (original) firmware (or try to write only boot of such firmware).

[allumts]

Very good work from our Best Developers for to have Get Out the "Combinaction" Fw in more mode, all work around right "Boot.img"... was time i was showing it but now is OFFICIAL and more good in this mode

Very great work for to have Uploaded these Right "Combinaction" Fw...and very thanks for this:

🐙 New Cert files were uploaded into the Support Area! 🐙

For the happiness of so many Octopus user

Compliment Octopus Developers for this best Update.

Br
allumts

[fernanvergara]

When you are upgrading the Shell?

thanks

Originally Posted by Gsmserver

Octoplus / Octopus Box Samsung Software v.2.3.7 is out!

We have added support for Samsung Galaxy XCover, Samsung Galaxy J7, Samsung Galaxy S6 and many other models!

Octoplus / Octopus Box Samsung Software v.2.3.7 Release Notes:

🐙 Added support for the following models:

- SM-G389F - added Direct Unlock, Read Codes, Fast Unlock, Fast Read Codes, Read/Write Cert, Read/Write security, Read/Write EFS, Write Firmware, Read PIT
- SM-J710F - added Reset FRP (auto-enable ADB)
- SM-J710FN - added Reset FRP (auto-enable ADB)

🐙 Added Reset FRP via ADB for next devices (ADB must be enabled):

- SM-G890A
- SM-G920A, SM-G920AZ, SM-G920D, SM-G920F, SM-G920FD, SM-G920FZ, SM-G920I, SM-G920K, SM-G920L, SM-G920S, SM-G920T, SM-G920T1, SM-G920W8
- SM-G9250, SM-G925A, SM-G925F, SM-G925FQ, SM-G925I, SM-G925K, SM-G925L, SM-G925S, SM-G925T, SM-G925T1, SM-G925W8
- SM-G9287, SM-G9287C, SM-G928C, SM-G928F, SM-G928G, SM-G928I, SM-G928K, SM-G928L, SM-G928N0, SM-G928S, SM-G928T, SM-G928W8
- SM-G9300, SM-G9308, SM-G930F, SM-G930FD, SM-G930K, SM-G930L, SM-G930S, SM-G930T, SM-G930T1, SM-G930U, SM-G930V, SM-G930W8
- SM-G9350, SM-G935D, SM-G935F, SM-G935FD, SM-G935J, SM-G935K, SM-G935L, SM-G935S, SM-G935T, SM-G935T1, SM-G935U, SM-G935V, SM-G935W8
- SM-J105B, SM-J105F, SM-J105H, SM-J105Y
- SM-J120A, SM-J120AZ, SM-J120F, SM-J120FN, SM-J120G, SM-J120M, SM-J120P, SM-J120W, SM-J120ZN
- SM-J200BT, SM-J200F, SM-J200G, SM-J200GU, SM-J200H, SM-J200M, SM-J200Y
- SM-J210F, SM-J210FD
- SM-J320A, SM-J320AZ, SM-J320F, SM-J320FN, SM-J320G, SM-J320H, SM-J320M, SM-J320MU, SM-J320ZN
- SM-J321AZ
- SM-J5108, SM-J510F, SM-J510FN, SM-J510G, SM-J510H, SM-J510K, SM-J510L, SM-J510N, SM-J510S, SM-J510U
- SM-N9200, SM-N9208, SM-N920A, SM-N920C, SM-N920CD, SM-N920F, SM-N920G, SM-N920I, SM-N920K, SM-N920L, SM-N920S, SM-N920T, SM-N920T, SM-N920W8
- SM-N9300, SM-N930A, SM-N930F, SM-N930FD, SM-N930K, SM-N930L, SM-N930P, SM-N930R4, SM-N930S, SM-N930T, SM-N930U, SM-N930W8

🐙 Combination firmware versions for most models are uploaded into the Support Area ("COMBINATION" folder)

🐙 New Cert files were uploaded into the Support Area! (thanks to mr.Ca0ss)

🐙 All supported operations described in details in the manual ("Cable & Manual" button in the software)

To remove FRP lock you can try to do the following:

1. Write "boot.img" partition from appropriate Combination firmware via "Advanced mode" option (select combination firmware, un-check partitions except "boot.img")
2. Perform "Reset FRP" operation in the software

or..

1. Write Full Combination Firmware
2. Go to "Developer Options" in the phone’s Settings
3. Check "Enable OEM unlock" option
4. Perform Factory Data Reset
5. Re-flash the phone with full stock (original) firmware

Note: "boot.img" from combination firmware can be not compatible with current phone's firmware. In that case phone will stuck on logo, or will be rebooting after writing of such boot. To restore the phone to its initial condition you need to re-flash it with different full stock (original) firmware (or try to write only boot of such firmware).

Note: You can write "boot.img" combination firmware or to downgrade phone's firmware version only on your own risk!

PS: If you cannot find combination firmware for your model inside "COMBINATION" folder in support area, this means we don’t have this files at the moment.

Download Octoplus / Octopus Box Samsung Software v.2.3.7

Find out more at: www.octoplusbox.com

[slam4neon]

Originally Posted by snmobilecenter

Read carefully brother ...

sorry buddy cant understand what i have to read .regards

[snmobilecenter]

Originally Posted by slam4neon

sorry buddy cant understand what i have to read .regards

To remove FRP lock you can try to do the following:

1. Write "boot.img" partition from appropriate Combination firmware via "Advanced mode" option (select combination firmware, un-check partitions except "boot.img")
2. Perform "Reset FRP" operation in the software

or..

1. Write Full Combination Firmware
2. Go to "Developer Options" in the phone’s Settings
3. Check "Enable OEM unlock" option
4. Perform Factory Data Reset
5. Re-flash the phone with full stock (original) firmware

[Octopus box]

how to choose corect combination file?

You should choose the file, that corresponds to model of your phone. For example, if You have SM-G930F phone - You should use "combination_fa60_g930fxxu1apc6_cl7570560_qb9028627" file.

[IQA_SHAHEEN]

thanks team for your quick reply will check and post results

br
iqa_shaheen

[Bazeed_khan17]

Sir i need SM-G903W combination firmware to solve my phone FRP lock

Thanks in Advance

[IQA_SHAHEEN]

Originally Posted by snmobilecenter

To remove FRP lock you can try to do the following:

1. Write "boot.img" partition from appropriate Combination firmware via "Advanced mode" option (select combination firmware, un-check partitions except "boot.img")
2. Perform "Reset FRP" operation in the software

or..

1. Write Full Combination Firmware
2. Go to "Developer Options" in the phone’s Settings
3. Check "Enable OEM unlock" option
4. Perform Factory Data Reset
5. Re-flash the phone with full stock (original) firmware

its simple when u download combination file from support and when start writing firmware from ur octopus box a advance tab button is there with write firmware button must check it and uncheck all partition except boot image after successful flash put fone in download mode and press reset frp and reactivation button

br
iqa_shaheen

[snmobilecenter]

Originally Posted by IQA_SHAHEEN

its simple when u download combination file from support and when start writing firmware from ur octopus box a advance tab button is there with write firmware button must check it and uncheck all partition except boot image after successful flash put fone in download mode and press reset frp and reactivation button

br
iqa_shaheen

Ha ha you miss understand me.. i am telling him who ask question... a am not asking question