|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
10-26-2017, 12:00
| #76 (permalink) |
| No Life Poster   Join Date: Jul 2006 Location: Comilla Age: 42
Posts: 793
Member: 304260 Status: Offline Sonork: 100.1593127 Thanks Meter: 355 |  Samsung SM-G532G Security Repaired Successfully Selected port: COM3 Selected model: SM-G532G Detected phone model: SM-G532G Firmware compiled date: Tue Oct 11 21:19:11 KST 2016 PDA version: G532GDXU1APJ3 CSC version: G532GOLB1APJ4 SW version: G532GDXU1APJ2 Phone SN: R58J33L6NQX Android version: 6.0.1 (MMB29T) Sales code: THL Country: THAILAND HW platform: mt6737t HW Chip: MT6737T HW Modem: MT6737T Security patch level: 2016-10-01 SIM 1 status: absent SIM 2 status: absent Codename: grandppltedx Checking Root: Phone is Rooted. Repairing... Security repaired successfully Phone will restart now. Please don't disconnect cable! Performed by 2.6.1 Software version. Great Job Octopus Team |
| The Following User Says Thank You to .:Towhid:. For This Useful Post: |
|
10-26-2017, 12:18
| #77 (permalink) |
| No Life Poster Join Date: Aug 2006 Location: gsmchaudhrayarshad Age: 43
Posts: 6,995
Member: 328688 Status: Offline Thanks Meter: 2,282  | s7 edgh frp lock done Welcome to Octoplus/Octopus Box Samsung software version 2.6.1 Platform: Samsung Android Selected port: COM3 Selected model: SM-G930FD Please put the phone into Download Mode and connect USB cable. Waiting for phone... Reading PIT... PIT was read successfully. Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP / Reactivation lock is successfully reseted! Performed by 2.6.1 Software version. |
| The Following User Says Thank You to CHAUDHRAY ARSHAD For This Useful Post: |
|
10-26-2017, 13:25
| #79 (permalink) |
| No Life Poster  Join Date: Sep 2006 Location: Allah is Greatest
Posts: 4,822
Member: 358694 Status: Offline Sonork: 100.1597323 Thanks Meter: 994 | Welcome to Octoplus/Octopus Box Samsung software version 2.6.1 ----------------------------------------------------------------------------------- To connect SM-Z200F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. On dial pad type *#84936# to enable Developer Option. 3. Go to Settings -> Developer Options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- To connect SM-G570F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-G570F Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/4 attempt)..success FRP / Reactivation lock is successfully reseted! Performed by 2.6.1 Software version. |
| The Following 2 Users Say Thank You to alamgarh For This Useful Post: |
|
10-26-2017, 14:45
| #82 (permalink) |
| No Life Poster  Join Date: Apr 2008 Location: LOVE A L L AH LOVE ALQURAN
Posts: 1,944
Member: 754324 Status: Offline Sonork: LOVE MOHAMMAD (S.A.W) Thanks Meter: 500 | Welcome to Octoplus/Octopus Box Samsung software version 2.6.1 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM33 Selected model: SM-A310F Searching for UART interface.. COM33 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM33 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/2 attempt)..success FRP / Reactivation lock is successfully reseted! Performed by 2.6.1 Software version. 7.0 not supported need downgrade to 6.0.1 |
| The Following User Says Thank You to ABDULMANAN For This Useful Post: |
|
10-26-2017, 23:14
| #83 (permalink) |
| No Life Poster  Join Date: Feb 2002 Location: UK
Posts: 948
Member: 9732 Status: Offline Thanks Meter: 27 | A710k frp Hi Please need to remove FRP from K710F : Welcome to Octoplus/Octopus Box Samsung software version 2.6.1 ----------------------------------------------------------------------------------- To connect SM-G935F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-G935F Please put the phone into Download Mode and connect USB cable. Waiting for phone... Reading PIT... PIT was read successfully. Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP / Reactivation lock is successfully reseted! Performed by 2.6.1 Software version. ------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-A710K Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..unsuccessful This version of "sBoot" is not supported, try to change "sBoot"! Operation was failed! Performed by 2.6.1 Software version. Selected AP file: F:\SAMSUNG\A710FD\A710KKKU1APC4 _A710KKTC1APC4_KTC+Android+5.1.1+by+combinefile.co m \A710KKKU1APC4_A710KKTC1APC4_A710KKKU1APC4 _HOME.tar.md5 Please put the phone into Download Mode and connect USB cable. To put SM-A710K into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOTLOADER section... BOOTLOADER section has been written successfully. Firmware writing successfully completed. Performed by 2.6.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-A710K Searching for a phone (waiting for ADB device)... Operation was canceled Performed by 2.6.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-A710K Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..unsuccessful This version of "sBoot" is not supported, try to change "sBoot"! Operation was failed! Performed by 2.6.1 Software version. Selected BOOT file: F:\SAMSUNG\A710FD\A710KKKU1APB1 _KTC1APB1\BL_A710KKKU1APB1_CL7053684_QB8470862_REV 00 _user_low_ship.tar.md5 Selected AP file: F:\SAMSUNG\A710FD\A710KKKU1APB1_KTC1APB1 \AP_A710KKKU1APB1_CL7053684_QB8470862_REV00 _user_low_ship.tar.md5 Selected CP file: F:\SAMSUNG\A710FD\A710KKKU1APB1_KTC1APB1 \CP_A710KKKU1APB1_CL7053684_QB8470862_REV00 _user_low_ship.tar.md5 Selected CSC file: F:\SAMSUNG\A710FD\A710KKKU1APB1_KTC1APB1 \CSC_KTC_A710KKTC1APB1_CL7053684_QB8470862_REV00 _user_low_ship.tar.md5 Please put the phone into Download Mode and connect USB cable. To put SM-A710K into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOTLOADER section... BOOTLOADER section has been written successfully. Firmware writing successfully completed. Performed by 2.6.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-A710K Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..unsuccessful This version of "sBoot" is not supported, try to change "sBoot"! Operation was failed! Performed by 2.6.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-A710K Searching for a phone (waiting for ADB device)... Operation was canceled Performed by 2.6.1 Software version. Selected AP file: F:\SAMSUNG\A710FD\A710FXXU1AOL6_sboot.tar Please put the phone into Download Mode and connect USB cable. To put SM-A710K into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOTLOADER section... BOOTLOADER section has been written successfully. Writing Firmware Failed Performed by 2.6.1 Software version. Selected firmware file: a710k_rootedboot.oct Please put the phone into Download Mode and connect USB cable. To put SM-A710K into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOT section... BOOT section has been written successfully. Writing Firmware Failed Performed by 2.6.1 Software version. Selected AP file: F:\SAMSUNG\A710FD\A710KKKU1APC4 _A710KKTC1APC4_KTC+Android+5.1.1+by+combinefile.co m \A710KKKU1APC4_A710KKTC1APC4_A710KKKU1APC4 _HOME.tar.md5 Please put the phone into Download Mode and connect USB cable. To put SM-A710K into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOTLOADER section... BOOTLOADER section has been written successfully. Writing CM section... CM section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Writing RADIO section... RADIO section has been written successfully. Firmware writing successfully completed. Performed by 2.6.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-A710K Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..unsuccessful This version of "sBoot" is not supported, try to change "sBoot"! Operation was failed! Performed by 2.6.1 Software version. Selected BOOT file: F:\SAMSUNG\A710FD\A710KKKU1APB1 _KTC1APB1\BL_A710KKKU1APB1_CL7053684_QB8470862_REV 00 _user_low_ship.tar.md5 Selected AP file: F:\SAMSUNG\A710FD\A710KKKU1APB1_KTC1APB1 \AP_A710KKKU1APB1_CL7053684_QB8470862_REV00 _user_low_ship.tar.md5 Selected CP file: F:\SAMSUNG\A710FD\A710KKKU1APB1_KTC1APB1 \CP_A710KKKU1APB1_CL7053684_QB8470862_REV00 _user_low_ship.tar.md5 Selected CSC file: F:\SAMSUNG\A710FD\A710KKKU1APB1_KTC1APB1 \CSC_KTC_A710KKTC1APB1_CL7053684_QB8470862_REV00 _user_low_ship.tar.md5 Please put the phone into Download Mode and connect USB cable. To put SM-A710K into Download Mode, You have to perform the following steps: 1. Press and hold "Volume-" + "Home" + "Power ON" keys. 2. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOTLOADER section... BOOTLOADER section has been written successfully. Writing PARAM section... PARAM section has been written successfully. Writing CM section... CM section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing USERDATA section... USERDATA section has been written successfully. Writing RADIO section... RADIO section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Firmware writing successfully completed. Performed by 2.6.1 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM10 Selected model: SM-A710K Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..unsuccessful This version of "sBoot" is not supported, try to change "sBoot"! Operation was failed! Performed by 2.6.1 Software version. Please advice. |
|
10-27-2017, 06:14
| #84 (permalink) | |
| Product Supporter   Join Date: Oct 2009 Location: Romania, Bucharest
Posts: 99,797
Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,405 | Quote:
| |
|
10-27-2017, 10:07
| #85 (permalink) |
| No Life Poster  Join Date: Oct 2009 Location: GRAN ALACANT SPAIN
Posts: 1,053
Member: 1147852 Status: Offline Thanks Meter: 587 | PERFECT ..... Platform: Samsung Android Selected port: COM1 Selected model: SM-J710F Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM31 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/4 attempt)..success FRP / Reactivation lock is successfully reseted! Performed by 2.6.1 Software version. |
| The Following User Says Thank You to Punto-Móvil For This Useful Post: |
|
10-27-2017, 10:46
| #86 (permalink) |
| Freak Poster   Join Date: Sep 2011 Location: Lebanon
Posts: 178
Member: 1657517 Status: Offline Thanks Meter: 74 | 🐙 Octoplus / Octopus Box Samsung v.2.6.1 - new unique Reset FRP method via UART 🐙 S7 edge Reset Frp only 40 secends done by Octoplus  Only I click ResetFRP/Reactivation Then via UART(UFS memory chip) done my phone only 40 secends Thanks Octoplus team Sent from my iPhone using Tapatalk Last edited by Dulaljan; 10-30-2017 at 20:15. Reason: S7 Edge reset Frp done 40 sevens by Octoplus |
| The Following User Says Thank You to Dulaljan For This Useful Post: |
|
10-27-2017, 14:06
| #88 (permalink) | |
| No Life Poster  Join Date: Apr 2011 Age: 58
Posts: 16,408
Member: 1564612 Status: Offline Thanks Meter: 12,343 | Quote:
Any Advance Flash mode is been deleted!!! Is been added by Default .oct firmware but if Ceck good there's also Advance mode in .tar.md5 | |
| The Following User Says Thank You to allumts For This Useful Post: |
|
10-27-2017, 20:22
| #89 (permalink) | |
| No Life Poster Join Date: Feb 2002 Location: UK
Posts: 948
Member: 9732 Status: Offline Thanks Meter: 27 |  Quote:
Please kindly send me a link to working one . Best regards H KATOUE | |
|
10-27-2017, 20:29
| #90 (permalink) | |
| Freak Poster Join Date: Sep 2011 Location: Lebanon
Posts: 178
Member: 1657517 Status: Offline Thanks Meter: 74 | 🐙 Octoplus / Octopus Box Samsung v.2.6.1 - new unique Reset FRP method via UART 🐙 Quote:
Yes sir, I am showing have this options Sent from my iPhone using Tapatalk Last edited by Dulaljan; 10-27-2017 at 20:44. | |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
|
|
Linear Mode
