🐙 Octoplus Samsung Software v4.2.1 is out! 🐙 - Page 3 - GSM-Forum

markrhoden · 04-17-2023, 07:46

a lot of new models still not included....

update more pls...tnx

Octopus support · 04-17-2023, 07:57

Hello

Quote:

teammonoxide

Please, check your PM!

dasuza · 04-18-2023, 09:30

Quote:

Originally Posted by Octopus support

Hello

Didn't icon with enabling ADB appear?

no sir adb icon not appear at all

dasuza · 04-19-2023, 08:51

Quote:

Originally Posted by Octopus support

Hello

Didn't icon with enabling ADB appear?

when i try frp 2022 new method in this set which is s908b adb is enables but when i try mdm unlock adb icon does not appear and the phone relocks mdm again.

shoha707 · 04-19-2023, 10:58

Welcome to Octoplus Samsung Software v.4.2.1

Work ID: 0000000001949CEC
Starting Unlock MDM (Apr.2023)
Selected model: General_Exynos
Make factory data reset and connect the phone on first page of activation stage to PC via USB.
Input device IMEI and serial number
Phone must be in Setup Wizard mode
Unlock MDM (Apr.2023) canceled
Execution time 13 second(s)
Performed by 4.2.1 Software version.

Work ID: 0000000001E82029
Starting Unlock MDM (Apr.2023)
Selected model: General_Exynos
Make factory data reset and connect the phone on first page of activation stage to PC via USB.
Input device IMEI and serial number
Phone must be in Setup Wizard mode
Input IMEI: 35883********
Input SN: R5C*******
Connecting to server...
Username: ******
Your balance: 100 credits
Sending device information..
OK
Follow these steps :
1. In Android Setup Wizard mode tap on the blank space 6 times.
2. Scan this QR code to install MDM Guard service on your device.
3. Connect to Wi-Fi.
4. Follow the instructions on the screen.
5. Allow USB debugging mode when prompt appears on the screen.
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
QR Code is scanned
Reading info...
Detected model: SM-S918U1
Fingerprint: samsung/dm3quew/dm3q:13/TP1A.220624.014/S918U1UES1AWBM:user/release-keys
Firmware compiled date: Thu Mar 2 19:31:14 KST 2023
PDA version: S918U1UES1AWBM
CSC version: S918U1OYM1AWBM
SW version: S918U1UES1AWBM
Build number: 23821288
Phone SN: R5C*******
Android version: 13 (TP1A.220624.014)
Sales code: XAA
Carrier Id: XAA
Country: USA
HW platform: qcom
HW Chip: kalama
HW Modem: REV1.0
Security patch level: 2023-03-01
Warranty Void: 0
Codename: dm3quew
SIM 1 status: ABSENT
SIM 2 status: NOT READY
Modem board: SM8550
Your account will be charged for 100 credits. Do you want to continue?
Starting exploit...
Activating service...
MDM Guard service was activated. Your device will finish the installation and reboot.
Continue to follow instructions on the device
MDM Guard service will restrict OTA updates on your device to prevent relock.
Unlock MDM (Apr.2023) done
Execution time 6 minute(s) 6 second(s)
Performed by 4.2.1 Software versio

Samsung Galaxy S23 Ultra SM-S918U1 MDM Unlock Done, Thanks Octoplus Team

Kwodan · 04-19-2023, 16:03

Quote:

Originally Posted by dasuza

when i try frp 2022 new method in this set which is s908b adb is enables but when i try mdm unlock adb icon does not appear and the phone relocks mdm again.

phone must be in setup wizard on first stage, no need enable adb, tap 6 times on the screen, and just scan QR

Octopus support · 04-20-2023, 08:16

Quote:

Originally Posted by dasuza

when i try frp 2022 new method in this set which is s908b adb is enables but when i try mdm unlock adb icon does not appear and the phone relocks mdm again.

Hello

Did you do facroty reset before operation.

Was device on wizard mode?

reysaulin · 04-21-2023, 21:15

full kg bypass muy bien

fitrockx · 04-22-2023, 07:51

Quote:

Originally Posted by shoha707

Welcome to Octoplus Samsung Software v.4.2.1

Work ID: 0000000001949CEC
Starting Unlock MDM (Apr.2023)
Selected model: General_Exynos
Make factory data reset and connect the phone on first page of activation stage to PC via USB.
Input device IMEI and serial number
Phone must be in Setup Wizard mode
Unlock MDM (Apr.2023) canceled
Execution time 13 second(s)
Performed by 4.2.1 Software version.

Work ID: 0000000001E82029
Starting Unlock MDM (Apr.2023)
Selected model: General_Exynos
Make factory data reset and connect the phone on first page of activation stage to PC via USB.
Input device IMEI and serial number
Phone must be in Setup Wizard mode
Input IMEI: 35883********
Input SN: R5C*******
Connecting to server...
Username: ******
Your balance: 100 credits
Sending device information..
OK
Follow these steps :
1. In Android Setup Wizard mode tap on the blank space 6 times.
2. Scan this QR code to install MDM Guard service on your device.
3. Connect to Wi-Fi.
4. Follow the instructions on the screen.
5. Allow USB debugging mode when prompt appears on the screen.
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
QR Code is scanned
Reading info...
Detected model: SM-S918U1
Fingerprint: samsung/dm3quew/dm3q:13/TP1A.220624.014/S918U1UES1AWBM:user/release-keys
Firmware compiled date: Thu Mar 2 19:31:14 KST 2023
PDA version: S918U1UES1AWBM
CSC version: S918U1OYM1AWBM
SW version: S918U1UES1AWBM
Build number: 23821288
Phone SN: R5C*******
Android version: 13 (TP1A.220624.014)
Sales code: XAA
Carrier Id: XAA
Country: USA
HW platform: qcom
HW Chip: kalama
HW Modem: REV1.0
Security patch level: 2023-03-01
Warranty Void: 0
Codename: dm3quew
SIM 1 status: ABSENT
SIM 2 status: NOT READY
Modem board: SM8550
Your account will be charged for 100 credits. Do you want to continue?
Starting exploit...
Activating service...
MDM Guard service was activated. Your device will finish the installation and reboot.
Continue to follow instructions on the device
MDM Guard service will restrict OTA updates on your device to prevent relock.
Unlock MDM (Apr.2023) done
Execution time 6 minute(s) 6 second(s)
Performed by 4.2.1 Software versio

Samsung Galaxy S23 Ultra SM-S918U1 MDM Unlock Done, Thanks Octoplus Team

Hello, does this model receive calls when the screen is off?

namos23 · 04-22-2023, 16:15

Quote:

Originally Posted by fitrockx

Hello, does this model receive calls when the screen is off?

Not if you use this method, no

Kwodan · 04-22-2023, 16:42

Quote:

Originally Posted by fitrockx

Hello, does this model receive calls when the screen is off?

f711b can receive calls, tested

namos23 · 04-22-2023, 16:52

Quote:

Originally Posted by Kwodan

f711b can receive calls, tested

Correct. The problem exists with U and U1 models (and maybe W, not tested yet)

Kwodan · 04-22-2023, 17:29

Quote:

Originally Posted by namos23

Correct. The problem exists with U and U1 models (and maybe W, not tested yet)

i will try to test soon

expert2go · 04-23-2023, 22:41

Quote:

Originally Posted by Octopus support

Hello

We will try to add this model, if it possible

In case you want to perform MDM unlock operation, choose General_Qualcomm in tab device's model and perform operation

what if you do all unlock (MDM and KG), will the device work fine or not allowed to do so?

Octopus support · 04-24-2023, 07:27

Quote:

Originally Posted by reysaulin

full kg bypass muy bien

Hello

Please, explain your problem in more detail in English

04-17-2023, 07:46	#31 (permalink)
markrhoden No Life Poster Join Date: Feb 2009 Location: baguio city philippines Posts: 1,126 Member: 981198 Status: Offline Sonork: 100.1602386 Thanks Meter: 131	a lot of new models still not included.... update more pls...tnx

04-19-2023, 10:58	#35 (permalink)
shoha707 Junior Member Join Date: Jun 2012 Location: Samarkand Posts: 11 Member: 1777906 Status: Offline Thanks Meter: 7	Welcome to Octoplus Samsung Software v.4.2.1 Work ID: 0000000001949CEC Starting Unlock MDM (Apr.2023) Selected model: General_Exynos Make factory data reset and connect the phone on first page of activation stage to PC via USB. Input device IMEI and serial number Phone must be in Setup Wizard mode Unlock MDM (Apr.2023) canceled Execution time 13 second(s) Performed by 4.2.1 Software version. Work ID: 0000000001E82029 Starting Unlock MDM (Apr.2023) Selected model: General_Exynos Make factory data reset and connect the phone on first page of activation stage to PC via USB. Input device IMEI and serial number Phone must be in Setup Wizard mode Input IMEI: 35883****** Input SN: R5C*** Connecting to server... Username: ** Your balance: 100 credits Sending device information.. OK Follow these steps : 1. In Android Setup Wizard mode tap on the blank space 6 times. 2. Scan this QR code to install MDM Guard service on your device. 3. Connect to Wi-Fi. 4. Follow the instructions on the screen. 5. Allow USB debugging mode when prompt appears on the screen. Searching ADB devices... Press "OK" button on the device to allow USB debugging OK QR Code is scanned Reading info... Detected model: SM-S918U1 Fingerprint: samsung/dm3quew/dm3q:13/TP1A.220624.014/S918U1UES1AWBM:user/release-keys Firmware compiled date: Thu Mar 2 19:31:14 KST 2023 PDA version: S918U1UES1AWBM CSC version: S918U1OYM1AWBM SW version: S918U1UES1AWBM Build number: 23821288 Phone SN: R5C***** Android version: 13 (TP1A.220624.014) Sales code: XAA Carrier Id: XAA Country: USA HW platform: qcom HW Chip: kalama HW Modem: REV1.0 Security patch level: 2023-03-01 Warranty Void: 0 Codename: dm3quew SIM 1 status: ABSENT SIM 2 status: NOT READY Modem board: SM8550 Your account will be charged for 100 credits. Do you want to continue? Starting exploit... Activating service... MDM Guard service was activated. Your device will finish the installation and reboot. Continue to follow instructions on the device MDM Guard service will restrict OTA updates on your device to prevent relock. Unlock MDM (Apr.2023) done Execution time 6 minute(s) 6 second(s) Performed by 4.2.1 Software versio Samsung Galaxy S23 Ultra SM-S918U1 MDM Unlock Done, Thanks Octoplus Team

04-21-2023, 21:15	#38 (permalink)
reysaulin Junior Member Join Date: Apr 2023 Location: mexico Age: 34 Posts: 26 Member: 3036758 Status: Offline Thanks Meter: 1	full kg bypass muy bien