|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
01-16-2019, 12:19
| #271 (permalink) |
| Junior Member  Join Date: Dec 2018
Posts: 14
Member: 2881518 Status: Offline Sonork: 100.650600 Thanks Meter: 5 | A510F 7.0 Frp Done With Octopus 16.01.2019 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-A510F Operation: Reset FRP - UART EMMC Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait... Upload Mode interface not found! Operation was canceled Performed by 2.7.5 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-A510F Operation: Reset FRP - UART EMMC Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Searching for UART interface.. COM7 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..success FRP / Reactivation lock is successfully reseted! Performed by 2.7.5 Software version. |
 |
|
01-16-2019, 18:36
| #275 (permalink) |
| No Life Poster  Join Date: Jun 2016 Location: UK
Posts: 613
Member: 2581848 Status: Offline Thanks Meter: 249 | Welcome to Octoplus Box Samsung software version 2.7.7 Selected firmware file: modem_COMBINATION_SM-G960U_Binary3).oct Please put the phone into Download Mode and connect USB cable. To put SM-G960U into Download Mode, You have to perform the following steps: 1. Power off the phone. 2. Press and hold "Volume-" + "Bixby" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing MODEM section... MODEM section has been written successfully. Firmware writing successfully completed. Performed by 2.7.7.1 Software version. Platform: Samsung Android Selected port: COM73 Selected model: SM-G960U Operation: Unlock Searching for a phone. Please wait... Detected phone model: SM-G960U Firmware compiled date: Mon Nov 26 14:06:24 KST 2018 PDA version: G960USQS3BRK2 CSC version: G960UOYN3BRK2 SW version: G960USQU3ARG2 Phone SN: R28K50DKZHK Android version: 8.0.0 (R16NW) Sales code: TMB Country: USA HW platform: sdm845 HW Chip: SDM845 HW Modem: SDM845 Security patch level: 2018-12-01 Warranty Void: 0 SIM 1 status: ready Codename: starqltesq Connecting to modem port... Found phone on COM74 Reading IMEI...OK ----------------------------------------------------------------------------------- Connecting to server...OK Checking smart card...OK Username: amine***** Authorizing...OK Checking balance...OK Checking operation...OK Your balance: 582 credits. ----------------------------------------------------------------------------------- Sending device information...OK Rebooting phone Searching for a phone. Please wait...OK Rebooting phone Searching for a phone. Please wait...OK Rebooting phone in Upload Mode... Searching for a phone. Please wait...OK Reading data...OK Rebooting phone Searching for a phone. Please wait...OK Initializing exploit... Unlocking phone... Phone is successfully unlocked To finish the operation, please restart the phone via phone's menu. Performed by 2.7.7.1 Software version. |
| |
|
01-18-2019, 14:19
| #276 (permalink) |
| No Life Poster  Join Date: Jul 2004 Location: Ukraine Age: 44
Posts: 2,727
Member: 75408 Status: Offline Thanks Meter: 1,190 | SM-G390F (7.0) Reset FRP successfully done by UART EMMC: Code: Platform: Samsung Android Selected port: Selected model: SM-G390F Operation: Reset FRP - UART EMMC Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Searching for UART interface.. COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..success FRP / Reactivation lock is successfully reseted! Performed by 2.7.7.1 Software version. |
| |
|
01-19-2019, 06:58
| #277 (permalink) |
| Banned Join Date: Oct 2017 Location: pakistan kpk mansehra Age: 26
Posts: 1,273
Member: 2765424 Status: Offline Thanks Meter: 1,039  | samsung e160k flsh done samsung e160k flsh done  Welcome to Octoplus Box Samsung software version 2.7.7 ----------------------------------------------------------------------------------- To connect SHV-E160K phone you have to perform the following steps: 1. Go to dial window. 2. Enter "319712358" number. 3. Enter "774632" password. 4. Go to System->SIO mode. 5. Select "Modem" radio button for USB section. 6. Go to dial window. 7. Enter "*#9090# or *#0808#" number. 8. Set "Diag config" to "USB" value. 9. Restart phone. 10. Press "Read Info" in software. Selected firmware file: HOME_E160K.oct Please put the phone into Download Mode and connect USB cable. To put SHV-E160K into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing Firmware Failed Performed by 2.7.7 Software version. Please put the phone into Download Mode and connect USB cable. To put SHV-E160K into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing Firmware Failed Performed by 2.7.7 Software version. Please put the phone into Download Mode and connect USB cable. To put SHV-E160K into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Advanced mode! Firmware write started. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing MODEM section... MODEM section has been written successfully. Writing MDM section... MDM section has been written successfully. Firmware writing successfully completed. Performed by 2.7.7 Software version. |
| |
|
01-19-2019, 07:01
| #278 (permalink) |
| Banned Join Date: Oct 2017 Location: pakistan kpk mansehra Age: 26
Posts: 1,273
Member: 2765424 Status: Offline Thanks Meter: 1,039 | samsung j100f emergency call only done samsung j100f emergency call only done  Welcome to Octoplus Box Samsung software version 2.7.7 ----------------------------------------------------------------------------------- To connect SM-J100H phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3. Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. Platform: Samsung Android Selected port: COM1 Selected model: SM-J100F Operation: Repair IMEI A Detected phone model: SM-J100F Firmware compiled date: Thu Jun 11 10:50:10 KST 2015 PDA version: J100FXXU0AOF1 CSC version: J100FOJV0AOF1 SW version: J100FXXU0AOAA Phone IMEI: 357946061918218 Android version: 4.4.4 (KTU84P) Sales code: XSG Country: UAE HW platform: mrvl HW Chip: PXA19x8 HW Modem: unknown SIM 1 status: ready Codename: j1ltexx Checking Root: Phone is Rooted. New IMEI: 354233674354526 Writing new phone IMEI... Phone will restart now. Please don't disconnect cable! IMEI successfully repaired. To finish the operation, please restart the phone via phone's menu. Performed by 2.7.7 Software version. |
| |
|
01-19-2019, 07:03
| #279 (permalink) |
| Banned Join Date: Oct 2017 Location: pakistan kpk mansehra Age: 26
Posts: 1,273
Member: 2765424 Status: Offline Thanks Meter: 1,039 | samsung j200f frp reset done samsung j200f frp reset done  Welcome to Octoplus Box Samsung software version 2.7.7 ----------------------------------------------------------------------------------- To connect SM-G920F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3. Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- To connect SM-G570F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3. Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-G570F Operation: Write Cert Selected file: G:\Z3X\G SERIES\G570F\all\all new\z3x\__352085090923512_352086090923510_10-11-2017_14-47-58.cert Detected phone model: SM-G570F Firmware compiled date: Thu Sep 28 21:17:28 KST 2017 PDA version: G570FXXU1BQIA CSC version: G570FODD1BQJ1 SW version: G570FXXU1BQJ1 Phone SN: R28JA2DSHCA Android version: 7.0 (NRD90M) Sales code: INS Country: India HW platform: exynos5 HW Chip: exynos7570 HW Modem: SHANNON305 Security patch level: 2017-08-01 Warranty Void: 1 SIM 1 status: absent SIM 2 status: absent Codename: on5xeltejv Checking Root: Phone is Rooted. Reading security backup, please wait... Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-G570F-R28JA2DSHCA-11-01-2019_11-36-51-.asec file Select Certificate2... Selected file: G:\Z3X\G SERIES\G570F\all\all new\Cert-SM-G570F-R58J74BNR3Y-352085090923512.cert Connecting to modem port... Found phone on COM28 Reading data from phone... Could not read data from modem port, trying with exploit.. Initializing exploit... Executing exploit... Writing Certificate failed Performed by 2.7.7 Software version. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM28 Selected model: SM-J200F Operation: Reset FRP - UserData Reset FRP/ Reactivation lock operation for SM-J200F will delete all user data on the phone (contacts, pictures and others)! NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service. Connecting to server... Connecting to server...Ok! Checking resource files... Resource files already downloaded. Please put the phone into Download Mode and connect USB cable. To put SM-J200F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Waiting for phone... Firmware write started. Writing Custom section... Custom section has been written successfully. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 2.7.7 Software version. |
| |
|
01-19-2019, 07:05
| #280 (permalink) |
| Banned Join Date: Oct 2017 Location: pakistan kpk mansehra Age: 26
Posts: 1,273
Member: 2765424 Status: Offline Thanks Meter: 1,039 | samsung j700f frp reset done samsung j700f frp reset done  Welcome to Octoplus Box Samsung software version 2.7.4 ----------------------------------------------------------------------------------- To connect SM-J710GN phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3. Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- To connect SM-J700F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3. Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-J700F Operation: Reset FRP - UserData Reset FRP/ Reactivation lock operation for SM-J700F will delete all user data on the phone (contacts, pictures and others)! NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service. Connecting to server... Connecting to server...Ok! Checking resource files... Resource files already downloaded. Please put the phone into Download Mode and connect USB cable. To put SM-J700F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Waiting for phone... Firmware write started. Writing Custom section... Custom section has been written successfully. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 2.7.4.3 Software version. |
| |
|
01-19-2019, 18:33
| #281 (permalink) |
| No Life Poster Join Date: Jun 2016 Location: UK
Posts: 613
Member: 2581848 Status: Offline Thanks Meter: 249 | ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM11 Selected model: SM-J737T1 Operation: Unlock Detected phone model: SM-J737T1 Firmware compiled date: Wed Aug 22 19:41:12 KST 2018 PDA version: J737T1UVU2ARH9 CSC version: J737T1TMK2ARH9 SW version: J737T1UVU2ARH9 Phone SN: R58KB30EE1N Android version: 8.0.0 (R16NW) Sales code: TMK Country: USA HW platform: exynos5 HW Chip: exynos7870 HW Modem: SHANNON315 Security patch level: 2018-08-01 Warranty Void: 0 SIM 1 status: absent Codename: j7topltemtr Connecting to modem port... Found phone on COM11 Reading IMEI...OK ----------------------------------------------------------------------------------- Connecting to server...OK Checking smart card...OK Username: amineabd***** Authorizing...OK Checking balance...OK Checking operation...OK Your balance: ********** ----------------------------------------------------------------------------------- Sending device information...OK Checking operation...OK Rebooting phone Searching for a phone. Please wait...OK Initializing exploit...OK Initializing... Reading HWID...OK Initializing exploit...OK Unlocking phone...OK Phone is successfully unlocked To finish the operation, please restart the phone via phone's menu. Performed by 2.7.7.1 Software version. |
| |
|
01-20-2019, 08:23
| #282 (permalink) |
| No Life Poster Join Date: Apr 2011 Location: algerie Age: 54
Posts: 2,501
Member: 1562854 Status: Offline Sonork: 1245 Thanks Meter: 259 | A510f u7 reset frp done Code: Platform: Samsung Android Selected port: COM1 Selected model: SM-A510F Operation: Reset FRP - UART EMMC Searching for UART interface.. COM5 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM5 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Searching for UART interface.. COM5 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock..success FRP / Reactivation lock is successfully reseted! Performed by 2.7.6.1 Software version. |
| |
|
01-20-2019, 14:26
| #283 (permalink) |
| No Life Poster  Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33
Posts: 3,491
Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178 | Welcome to Octoplus Box Samsung software version 2.7.5 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM20 Selected model: SM-N920C Operation: Reset FRP - UART UFS Please put the phone into Download Mode and connect USB cable. Waiting for phone... Reading PIT... PIT was read successfully. Searching for UART interface.. COM77 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Checking operation...OK Resetting FRP lock.. FRP / Reactivation lock is successfully reseted! Performed by 2.7.5 Software version. |
| |
|
01-20-2019, 17:27
| #284 (permalink) | |
| No Life Poster  Join Date: May 2006 Location: Sudan
Posts: 1,672
Member: 281857 Status: Offline Thanks Meter: 214 | N920A 7.0 DRK fixed successfully N920A 7.0 DRK fixed successfully thanx Octoplus team  Quote:
| |
| |
|
| Bookmarks |
| |
|
|
Sm-g530w unlock without root by octoplus box 
Linear Mode
